Filewatcher File Search File Search
Catalog
Content Search
» » » » » »

sdparm

List or change SCSI/SATA disk parameters

SCSI disk parameters are held in mode pages. This utility lists or changes those parameters. Other SCSI devices (or devices that use the SCSI command set e.g. some SATA devices) such as CD/DVD and tape drives may also find parts of sdparm useful. Requires the linux kernel 2.4 series or later. In the 2.6 series any device node the understands a SCSI command set may be used (e.g. /dev/sda). In the 2.4 series SCSI device node may be used.

Fetches Vital Product Data pages. Can send commands to start or stop the media and load or unload removable media.

Warning: It is possible (but unlikely) to change SCSI disk settings such that the disk stops operating or is slowed down. Use with care.

Homepage:
Package version:1.04
Architecture:x86_64
Distribution:CentOS
Filename:sdparm-1.04-1.1.el6.x86_64.rpm

/usr/share/doc/sdparm-1.04/README

Introduction
------------
sdparm is a utility for listing and potentially changing SCSI disk
parameters. More generally it can be used on any device that uses
a SCSI command set. Apart form SCSI disks, examples of devices that
use SCSI command sets are ATAPI CD/DVD drives, SCSI and ATAPI tape
drives and SCSI enclosures.

This utility was originally written for Linux. It has been ported
to FreeBSD,
more»

/usr/share/man/man8/sdparm.8.gz

SDPARM(8)                      SDPARM                      SDPARM(8)



NAME
       sdparm - access SCSI modes pages; read VPD pages; send simple
       SCSI commands.

SYNOPSIS
       sdparm   [--all]   [--clear=STR]   [--command=CMD]    [--dbd]
       [--defaults]   [--dummy]  [--flexible]  [--get=STR]  [--help]
       [--hex] [--inquiry] [--long]  [--num-desc]  [--page=PG[,SPG]]
       [--quiet
more»

/usr/share/doc/sdparm-1.04/ChangeLog

The version number is hardcoded into sdparm.c (in a C string);
the rpm spec file: sdparm.spec ; the debian/changelog file;
and the configure.ac file (in the AC_INIT item).

ChangeLog for sdparm-1.04 [20090920] [svn: r129]
  - add SAT ATA Power condition mode page (sat2r06)
  - add SBC Thin provisioning mode page (sbc3r20)
  - add SBC Thin provisioning VPD page (sbc3r20)
  - sync with spc4r21
  - a
more»

/usr/share/doc/sdparm-1.04/AUTHORS

Douglas Gilbert <dgilbert at interlog dot com>

/usr/share/doc/sdparm-1.04/COPYING

Copyright (c) 2005-2009 Douglas Gilbert.
 All rights reserved.

Redistribution and use in source and
more»

Browse inside sdparm-1.04-1.1.el6.x86_64.rpm

1.29 KB2014-11-27HEADER  view  68 mirrors
         [DIR]usr/ (2)  65535+ mirrors

Download sdparm-1.04-1.1.el6.x86_64.rpm

Results 1 - 1 of 1
Help - FTP Sites List - Software Dir.
Search over 15 billion files
© 1997-2016 FileWatcher.com