Filewatcher File Search File Search
Catalog
Content Search
» » » » » »

sg3_utils

Utils for Linux's SCSI generic driver devices + raw devices

Collection of Linux utilities for devices that use the SCSI command set. Includes utilities to copy data based on "dd" syntax and semantics (called sg_dd, sgp_dd and sgm_dd); check INQUIRY data and VPD pages (sg_inq); check mode and log pages (sginfo, sg_modes and sg_logs); spin up and down disks (sg_start); do self tests (sg_senddiag); and various other functions. See the README, CHANGELOG and COVERAGE files. Requires the linux kernel 2.4 series or later. In the 2.4 series SCSI generic device names (e.g. /dev/sg0) must be used. In the 2.6 series other device names may be used as well (e.g. /dev/sda).

Warning: Some of these tools access the internals of your system and the incorrect usage of them may render your system inoperable.

Homepage:
Package version:1.25
Architecture:x86_64
Distribution:CentOS
Filename:sg3_utils-1.25-5.el5.x86_64.rpm

/usr/share/doc/sg3_utils-1.25/README

                      README for sg3_utils
                      ====================
Introduction
============
This package contains low level utilities for devices that use a SCSI
command set. Apart from SCSI parallel interface (SPI) devices, the SCSI
command set is used by ATAPI devices (CD/DVDs and tapes), USB
mass storage devices, Fibre Channel disks, IEEE 1394 storage
devices (that use the "
more»

/usr/share/doc/sg3_utils-1.25/README.sg_start

Hi,

you can use sg_start to start (spin-up, 1) and stop (spin-down, 0) devices.
I also offers a parameter (-s) to send a synchronize cache command to a
device, so it should write back its internal buffers to the medium.

Be aware that the Linux SCSI subsystem at this time does not autmatically
starts stopped devices, so stopping a device which is in use may have fatal
results for you.

So, you sh
more»

/usr/share/man/man8/sg3_utils.8.gz

SG3_UTILS(8)                  SG3_UTILS                 SG3_UTILS(8)



NAME
       sg3_utils - a package of utilities for sending SCSI commands

SYNOPSIS
       sg_*   [--help]   [--hex]   [--raw]  [--verbose]  [--version]
       [OTHER_OPTIONS] DEVICE

DESCRIPTION
       sg3_utils is a package of utilities that send  SCSI  commands
       to  the  given  DEVICE via a SCSI pass through interface 
more»

/usr/share/man/man8/sg_dd.8.gz

SG_DD(8)                      SG3_UTILS                     SG_DD(8)



NAME
       sg_dd  -  copies
more»

/usr/share/man/man8/sg_emc_trespass.8.gz

SG_EMC_TRESPASS(8)            SG3_UTILS           SG_EMC_TRESPASS(8)



NAME
       sg_emc_trespass 
more»

/usr/share/man/man8/sg_format.8.gz

SG_FORMAT(8)                  SG3_UTILS                 SG_FORMAT(8)



NAME
       sg_format  - for
more»

/usr/share/man/man8/sg_get_config.8.gz

SG_GET_CONFIG(8)              SG3_UTILS             SG_GET_CONFIG(8)



NAME
       sg_get_config - 
more»

/usr/share/man/man8/sg_ident.8.gz

SG_IDENT(8)                   SG3_UTILS                  SG_IDENT(8)



NAME
       sg_ident - sends
more»

Browse inside sg3_utils-1.25-5.el5.x86_64.rpm

1.30 KB2014-11-29HEADER  view  38 mirrors
         [DIR]usr/ (2)  65535+ mirrors

Download sg3_utils-1.25-5.el5.x86_64.rpm

Results 1 - 1 of 1
Help - FTP Sites List - Software Dir.
Search over 15 billion files
© 1997-2016 FileWatcher.com