Filewatcher File Search File Search
Catalog
Content Search
» » » » » »

gvpe

Create a virtual ethernet using host-to-host tunnels

VPE creates a virtual ethernet (broadcasts supported, any protocol that works with a normal ethernet should work with VPE) by creating host-to-host tunnels between multiple endpoints.

Unlike other virtual private "network" solutions which merely create a single tunnel, VPE creates a real network with multiple endpoints.

It is designed to be very simple (cipher selection done at compiletime etc.), and easy to setup (only a single config file shared unmodified between all hosts).

Vpn hosts can neither sniff nor fake packets, that is, you can use MAC-based filtering to ensure authenticity of packets even from member nodes.

VPE can also be used to tunnel into some vpn network using a variety of protocols (https-proxy, tcp, udp, rawip, icmp-tunneling). It is, however, primarily designed to sit on the gateway machines of company branches to connect them together.

Homepage:
Package version:2.22
Architecture:i386
Distribution:Dag
Filename:gvpe-2.22-1.el5.rf.i386.rpm

/usr/share/doc/gvpe-2.22/README

==== NAME ====

    GNU-VPE - Overview of the GNU Virtual Private Ethernet suite.


==== DESCRIPTION ====

    GVPE is a suite designed to provide a virtual private network for
    multiple nodes over an untrusted network. This document first gives an
    introduction to VPNs in general and then describes the specific
    implementation of GVPE.


==   WHAT IS A VPN?   ==

    VPN is an acronym, 
more»

/usr/share/doc/gvpe-2.22/complex-example/README

These files are configuration files for "our" internal network.

It is highly non-trivial, so don't use this configuration as the basis of
your network unless you know what you are doing.

It features: around 30 hosts, many of them have additional networks behind
them and use an assortment of different tunneling protocols. The vpn is
fully routed, no arp is used at all.

The public IP addresses of
more»

/usr/share/doc/gvpe-2.22/NEWS

GVPE NEWS

2.22 Sun Feb  1 17:25:28 CET 2009
	- protocol version 0.1, compatible with older releases,
	- enabled icmp/tcp/http-proxy protocols by default.
	- updated copyright in program greetings.
        - fix some configure messages.
        - updated to libev 3.52.

2.21 Wed Sep  3 06:56:27 CEST 2008
	- protocol version 0.1, compatible with older releases,
	- add missing ev++.h include header 
more»

/usr/share/man/man5/gvpe.5.gz

GVPE(5)             GNU Virtual Private Ethernet             GVPE(5)



NAME
       GNU-VPE - Overvi
more»

/usr/share/man/man5/gvpe.conf.5.gz

GVPE.CONF(5)        GNU Virtual Private Ethernet        GVPE.CONF(5)



NAME
       gvpe.conf - conf
more»

/usr/share/man/man5/gvpe.osdep.5.gz

GVPE.OSDEP(5)       GNU Virtual Private Ethernet       GVPE.OSDEP(5)



NAME
       gvpe.osdep - os 
more»

/usr/share/man/man7/gvpe.protocol.7.gz

GVPE.PROTOCOL(7)    GNU Virtual Private Ethernet    GVPE.PROTOCOL(7)



The GNU-VPE Protocols
Overvi
more»

/usr/share/man/man8/gvpe.8.gz

GVPE(8)             GNU Virtual Private Ethernet             GVPE(8)



NAME
       gvpe - GNU Virtu
more»

Browse inside gvpe-2.22-1.el5.rf.i386.rpm

1.50 KB2014-11-28HEADER  view  31 mirrors
         [DIR]usr/ (3)  65535+ mirrors

Download gvpe-2.22-1.el5.rf.i386.rpm

Results 1 - 1 of 1
Help - FTP Sites List - Software Dir.
Search over 15 billion files
© 1997-2017 FileWatcher.com