Linux Radio Transmission Decoder
The multimon software can decode a variety of digital transmission modes
commonly found on UHF radio. A standard PC soundcard is used to acquire
the signal from a transceiver. The decoding is done completely in software.
Currently, the following modes are supported:
1200 Baud AFSK
2400 Baud AFSK (2 variants)
4800 Baud HAPN
9600 Baud FSK (G3RUH)
An arbitrary set of the above modes may run concurrently on the same input
signal (provided the CPU power is sufficient), so you do not have to know
in advance which mode is used. Note however that some modes might require
modifications to the radio (especially the 9600 baud FSK and the POCSAG
modes) to work properly.
POCSAG (Post Office Code Standards Advisory Group) is a common paging
multimon for Debian
Source was taken from http://www.ife.ee.ethz.ch/~sailer/ham/linux/multimon.html, although it appears that Sourceforge.net has it too.
Add hooks to use this with a sound data multiplexer, so that I might have multimon running while also shipping the sound data off over speak-freely.
Decode data bursts from EBS and NOAA weather radio - and make use
gen - program to generate test files of radio transmission
gen [options] output_file
This manual page documents briefly the gen
command. This manual page was written for the Debian
GNU/Linux distribution because the original program d
multimon - program to decode radio transmissions
multimon [options] [input_file]
This manual page documents briefly the multimon command.
This manual page was written for the Debian GNU/Linux distri‐
bution because the original program does not have a man
multimon (1.0-5) unstable; urgency=low
* Include newer gen.c and xdisplay.c versions from Thomas
This package was debianized by A. Maitland Bottoms <email@example.com> on
Mon, 19 Jun 2000 17:14:30
Browse inside multimon_1.0-5_amd64.deb
Results 1 - 1 of 1Search over 15 billion files
© 1997-2016 FileWatcher.com