utility to control frequency rates of your Radeon card
It is very helpful for underclocking the Radeon chip in order to save
power when running on batteries. Also, by underclocking it is possible
to prevent the fan from running.
It can also be used to gain performance by overclocking.
Radeon overlocking utility version 0.6e
It tries to detect the reference clock (xtal) from the
video BIOS, if this doesn't work you can specify it manually.
Try 1432 or 2950 if the default value of 2700 does not show the
correct frequency when using -i:
rovclock -x 1432 -i
Cards reported to work:
Radeon 9500 (Pro)
rovclock - utility to control frequency rates of your Radeon
This manual page documents briefly the rovclock command.
This manual page was written for the Debian distribution
because the original program does not have a manual
rovclock (0.6e-7) unstable; urgency=low
* debian/control: Homepage added.
* debian/control: Standards-version updated, no changes needed.
* Source format 3.0
-- Alexander GQ Gerasiov <email@example.com> Mon, 21 Mar 2011 14:45:41 +0300
rovclock (0.6e-6) unstable; urgency=low
"Just make it lintian-clean" release.
* debian/control: my e-mail address updated.
0.3a: -Added XTAL frequency detection from BIOS
0.4b: -Code cleanup, search PCI busses from 1 to 9
This package was debianized by Alexander Gerasiov <firstname.lastname@example.org> on
Sun, 5 Mar 2006 16:03:27 +0300.
Browse inside rovclock_0.6e-7_amd64.deb
Results 1 - 1 of 1Search over 15 billion files
© 1997-2017 FileWatcher.com