Filewatcher File Search File Search
Content Search
» » » » »


hardware control for QNAP Turbo Station devices

Allows to send commands to the microcontroller of supported devices, for example to change leds or sound a buzzer.

Depending on the device it can also monitor for example for button presses or temperature, with events triggering actions defined in the configuration file.

Supported devices at this time are the QNAP TS-109, TS-110, TS-119, TS-209, TS-210, TS-219, TS-219P, TS-409, TS-409U, TS-410, TS-410U, TS-419P and TS-419U but the code is extensible so more devices may be added in future releases.

Warning: the program is in alpha state, use at your own risk.

Package version:0.4.2-6


qcontrol for Debian

The qcontrol program is still in alpha stage. It is for example missing
a proper daemon mode that would enable it to run permanently in the

Because of the missing daemon mode, the functionality to monitor temperature
and control fan speed (TS-209/219/409) has been disabled in the config file.
See the original config file in ./examples/ 


qcontrol (0.4.2-2) unstable; urgency=low

  * Input device changed

    With udev (0.141-2) the persistent input device created by udev has
    changed to: /dev/input/by-path/platform-gpio-keys-event.

 -- Frans Pop <>  Fri, 21 Aug 2009 01:54:46 +0200

qcontrol (0.4.2-1) unstable; urgency=low

  qcontrol config file compatibility with Linux kernel

  With Debian kernel 2.6.26 and ups


QCONTROL(1)                                              QCONTROL(1)

       qcontrol - Hardware control for QNAP Turbo Station

       qcontrol -d

       qcontrol command value

       The  utility  can  be  used  to control leds or fan speed, or
       sound the buzzer.  As a daemon it can monitor the device  for
       example  for button presses or temperature va


qcontrol (0.4.2-6) unstable; urgency=low

  * qcontrol-udeb: depend on event-modules instead of inpu


* Check for gpio_keys module on install; load it and add to /etc/modules
* Update manpage
* Update p


This package was debianized by Frans Pop <> on
Sun, 23 Mar 2008 18:14:35 +0100.

It wa

Browse inside qcontrol_0.4.2-6_armel.deb

         [DIR]DEBIAN/ (7)  65535+ mirrors
         [DIR]etc/ (3)  65535+ mirrors
         [DIR]usr/ (2)  65535+ mirrors

Download qcontrol_0.4.2-6_armel.deb

Results 1 - 1 of 1
Help - FTP Sites List - Software Dir.
Search over 15 billion files
© 1997-2017