Filewatcher File Search File Search
Catalog
Content Search
» » » » »

sg3-utils

utilities for devices using the SCSI command set

Variants:
Most OSes have SCSI pass-through interfaces that enable user space programs to send SCSI commands to a device and fetch the response. With SCSI to ATA Translation (SAT) many ATA disks now can process SCSI commands. Typically each utility in this package implements one SCSI command. See the draft standards at www.t10.org for SCSI command definitions plus SAT. ATA commands are defined in the draft standards at www.t13.org . For a mapping between supported SCSI and ATA commands and utility names in this package see the COVERAGE file.
Homepage:
Package version:1.33-1
Architecture:i386
Distribution:Debian
Filename:sg3-utils_1.33-1_i386.deb

/usr/share/doc/sg3-utils/README.gz

                      README for sg3_utils
                      ====================
Introduction
============
This package contains low level utilities for devices that use the SCSI
command set. Originally the SCSI command set was associated exclusively
with the SCSI Parallel Interface (SPI) transport. SPI has now almost
been completely replaced by the Serial Attached SCSI (SAS) transport which

more»

/usr/share/doc/sg3-utils/README.iscsi

iSCSI support for sg3-utils is available from external patches.

To build sg3-utils from sources and activate built-in iSCSI support
you need both sg3-utils and the external user-space iSCSI library hosted at :

https://github.com/sahlberg/libiscsi

This library provides a client library for accessing remote iSCSI
devices and also comes with patches to the sg3-utils source code
distribution to com
more»

/usr/share/doc/sg3-utils/README.sg_start

Hi,

you can use sg_start to start (spin-up, 1) and stop (spin-down, 0) devices.
I also offers a parameter (-s) to send a synchronize cache command to a
device, so it should write back its internal buffers to the medium.

Be aware that the Linux SCSI subsystem at this time does not automatically
starts stopped devices, so stopping a device which is in use may have fatal
results for you.

So, you s
more»

/usr/share/doc/sg3-utils/examples/README

Building files in this directory depends on several files being already
built in the ../lib director
more»

/usr/share/doc/sg3-utils/examples/archive/README

In order to save source code space, the files is this directory have
been removed (apart from the re
more»

/usr/share/man/man8/scsi_logging_level.8.gz

SCSI_LOGGING_LEVEL(8)         SG3_UTILS        SCSI_LOGGING_LEVEL(8)



NAME
       scsi_logging_lev
more»

/usr/share/man/man8/scsi_mandat.8.gz

SCSI_MANDAT(8)                SG3_UTILS               SCSI_MANDAT(8)



NAME
       scsi_mandat  -  
more»

/usr/share/man/man8/scsi_readcap.8.gz

SCSI_READCAP(8)               SG3_UTILS              SCSI_READCAP(8)



NAME
       scsi_readcap - d
more»

Browse inside sg3-utils_1.33-1_i386.deb

         [DIR]DEBIAN/ (2)  65535+ mirrors
         [DIR]usr/ (2)  65535+ mirrors

Download sg3-utils_1.33-1_i386.deb

Results 1 - 1 of 1
Help - FTP Sites List - Software Dir.
Search over 15 billion files
© 1997-2016 FileWatcher.com