|File Search||Catalog||Content Search|
This tester runs independently of any OS - it is run at computer boot-up, so that it can test *all* of your memory. You may want to look at `memtester', which allows to test your memory within Linux, but this one won't be able to test your whole RAM.
It can output a list of bad RAM regions usable by the BadRAM kernel patch, so that you can still use your old RAM with one or two bad bits.
Memtest86+ is based on memtest86 3.0, and adds support for recent hardware, as well as a number of general-purpose improvements, including many patches to memtest86 available from various sources.
Both memtest86 and memtest86+ are being worked on in parallel.
memtest86+ for Debian --------------------- Two binary images are provided: - A legacy /boot/memtest86+.bin that uses Linux zImage boot protocol. - An experimental multiboot /boot/memtest86+_multiboot.bin image that follows the Multiboot specification. memtest86+_multiboot.bin is automatically registered against grub2. For other bootloaders you'll need to do some manual setup (see more»
Memtest86++ v4.20 ==================== Table of Contents ================= 1) Introduction 2) Licensing 3) Installation 4) Serial Port Console 5) Online Commands 6) Memory Sizing 7) Error Display 8) Trouble-shooting Memory Errors 9) Execution Time 10) Memory Testing Philosophy 11) Memtest86+ Test Algorithms 12) Individual Test Descriptions 13) Problem Report more»
memtest86+ (4.20-1.1) unstable; urgency=low * Non-maintainer upload. * Add lintian override for statically linked memtest86+ * Fix pending l10n issues. Debconf translations: - Danish (Joe Hansen). Closes: #600743 - Slovak (Slavko). Closes: #622093 - Dutch (Jeroen Schot). Closes: #622767 - Serbian ijekavian (Zlatan Todoric). Closes: #635204 - Serbian ijekavian latin ( more»
Memtest86+ V4.20 changelog -------------------------- - Added failsafe mode (F1 at startup) - more»
This package was debianized by Yann Dirson <firstname.lastname@example.org> It was downloaded from http://www.me more»