Software control for ICOM radios with CI-V interface
This program allows you to control many types of ICOM radio
(transceivers and receivers) from the serial port on your computer.
You need a CI-V interface circuit to connect the radio to the computer
(to convert between RS-232 and TTL), which can be easily found on the web.
README for the icom package
To connect your radio to your computer, you need a CI-V interface. You
can buy one from ICOM, or obtain the circuit diagram quite readily on the
web. The circuit converts from the RS-232 levels of your serial port
to the TTL levels used by the radio. You can drive several ICOM radios
using one interface, but you must set unique addresses inside each radio.
The ICOM p
icom - remote control for ICOM transceivers and receivers
icom [ -r radio ] [ -c channel ] [ -m mode ] [-o offset ] [
-g frequency ] [ -f file] [ -adk ]
This program controls ICOM radio transceivers and receivers
with the CI-V option. Most recent ICOM radios
icom (20040912-1.1) unstable; urgency=low
* Retiring - remove myself from the uploaders list.
-- Joop Stakenborg <email@example.com> Sat, 14 Nov 2009 14:16:07 +0000
icom (20040912-1) unstable; urgency=low
* New upstream release
-- Hamish Moffatt <firstname.lastname@example.org> Sat, 17 Sep 2005 14:10:31 +1000
icom (20020923-3) unstable; urgency=medium
* Modified icom.c to include <errno.h>. Fi
This is the Debian GNU/Linux package of icom.
This package was put together from sources obtained at
Browse inside icom_20040912-1.1_kfreebsd-i386.deb
Results 1 - 1 of 1Search over 15 billion files
© 1997-2017 FileWatcher.com