Filewatcher File Search File Search
Catalog
Content Search
» » » » »

hdparm

tune hard disk parameters for high performance

Variants:
Get/set device parameters for Linux SATA/IDE drives. Primary use is for enabling irq-unmasking and IDE multiplemode.
Homepage:
Package version:9.39-1+b1
Architecture:mipsel
Distribution:Debian
Filename:hdparm_9.39-1+b1_mipsel.deb

/usr/share/doc/hdparm/README.Debian.gz

hdparm for Debian
  -----------------
  
General hard disk tuning:
  
  To get the best performance out of your hard drive turn on DMA support
  in the kernel and enable 32bit IO (-c) and multiple sector I/O (-m)
  with hdparm. You can find out the number to use for -m by using -i and
  reading MaxMultSect.
  
  These settings can now be set in either /etc/hdparm.conf or in
  /etc/apm/20hdparm.  I
more»

/usr/share/doc/hdparm/README.acoustic

Automatic Acoustic Management
=============================

Most modern harddisk drives have the ability to speed down the head movements
to reduce their noise output. The possible values are between 0 and 254. 128
is the most quiet (and therefore slowest) setting and 254 the fastest (and loudest).
Some drives have only two levels (quiet / fast), while others may have different
levels realized be
more»

/usr/share/doc/hdparm/wiper/README.txt.gz

TRIM / wiper script for SATA SSDs   (June 2010)
=================================================

The wiper.sh script is for tuning up SATA SSDs (Solid-State-Drives).

It calculates a list of free (unallocated) blocks within a filesystem,
and informs the SSD firmware of those blocks, so that it can better manage
the underlying media for wear-leveling and garbage-collection purposes.

In some case
more»

/usr/share/man/man5/hdparm.conf.5.gz

hdparm.conf(5)        hdparm configuration file       hdparm.conf(5)



NAME
       hdparm.conf - De
more»

/usr/share/man/man8/hdparm.8.gz

HDPARM(8)                                                  HDPARM(8)



NAME
       hdparm - get/set
more»

/usr/share/doc/hdparm/changelog.Debian.gz

hdparm (9.39-1+b1) sid; urgency=low

  * Binary-only non-maintainer upload for mipsel; no source cha
more»

/usr/share/doc/hdparm/changelog.gz

hdparm-9.39
	- added -R flag to control Read-Write-Verify feature, courtesy of Gordan Bobic
	- nuked
more»

/usr/share/doc/hdparm/changelog.old.gz

old changelog

23-December-1994 Bruce Perens <Bruce@Pixar.com>
        Added Debian GNU/Linux packag
more»

Browse inside hdparm_9.39-1+b1_mipsel.deb

         [DIR]DEBIAN/ (6)  65535+ mirrors
         [DIR]etc/ (4)  65535+ mirrors
         [DIR]lib/ (2)  65535+ mirrors
         [DIR]sbin/ (1)  65535+ mirrors
         [DIR]usr/ (2)  65535+ mirrors

Download hdparm_9.39-1+b1_mipsel.deb

Results 1 - 1 of 1
Help - FTP Sites List - Software Dir.
Search over 15 billion files
© 1997-2016 FileWatcher.com