GSM 07.10 Multiplexer
pyneo mobile stack: muxer as GSM 07.10 describes.
A muxer for gsm modems to allow more than one channel to be used with
the modem. Each channel can be used to issue phonecalls, watch signal
strength, receiving sms or even doing ppp (gprs) at the same time.
Access to the multiplexer is managed via D-Bus.
The Package gsm0710muxd
A gsm muxer is needed to keep a ppp/gprs up & running while sms and
calls are still signaled on another channel. Some modems even support
using gprs while a call is active, others suspend gprs during calls.
The muxer supports various options to change the behaviour for
different modems. Use -h to see a brief help screen.
All logging is done throug
gsm0710muxd - a gsm 07.10 muxer
A gsm muxer is needed to keep a ppp/gprs up & running while
sms and calls are still signaled on another channel. Some
modems even support using gprs while a call is active, others
suspend gprs duri
gsm0710muxd (1.13-1) unstable; urgency=low
* Initial Release.
* closes: bug#534163
-- Johannes Schauer <email@example.com> Tue, 23 June 2009 10:08:51 +0000
2008-12-15 Michael Dietrich <firstname.lastname@example.org>
* anounce channels /after/ they are acknowledged (than
M. Dietrich <email@example.com> (coding)
M. Holtmann (build, code fixes)
M. Lauer (build)
This package was debianized by Johannes Schauer <firstname.lastname@example.org> on
Tue, 23 June 2009 10:08:51 +000
- if the other end of the channel is reading too slow, overruns may
happen which are
Browse inside gsm0710muxd_1.13-1_mipsel.deb
Results 1 - 1 of 1Search over 15 billion files
© 1997-2016 FileWatcher.com