utility to upgrade the firmware of a Linksys NSLU2 via the network
upslug2 is a command line program intended to allow the upgrade of a
Linksys NSLU2 (Network Storage Link for USB 2.0 Disk Drives) firmware
to new or different versions. When a NSLU2 in the local network is put
in upgrade mode, upslug2 can connect to it and upload a new firmware.
upslug2 will accept a full firmware image but it can also upgrade the
flash from individual files holding the kernel, ramdisk and root
filesystem. upslug2 provides status information during the upgrade
process and verifies the written image after the upgrade.
This is upslug2.
upslug2 is a command line program intended to allow the upgrade of a LinkSys
NSLU2 firmware to new or different versions. Unlike upslug and the LinkSys
(Sercomm) upgrade utilities upslug2 will synthesise a complete 'image'
from a kernel and a root file system, as such it duplicates part of the
functionality of 'slugimage'.
upslug2 also optimises the upload to avoid transmitted
upslug2 - utility to upgrade the firmware of a NSLU2 via the
upslug2 is a command line program intended to allow the
upgrade the firmware of a Linksys NSLU2 (Network Storage Link
for USB 2.0 Disk Drives) to new or differ
upslug2 (11-3) unstable; urgency=low
* debian/control: Update Standards-Version to 3.8.4.
Added Homepage and Debian repository fields.
-- Gordon Farquharson <firstname.lastname@example.org> Tue, 01 Jun 2010 22:32:10 -0700
upslug2 (11-2) unstable; urgency=low
* New maintainer (requested by Martin Michlmayr).
* debian/control: Update Standards-Version to 3.7.3. No changes.
initial Initial version
upslug2_6 Added LE support
upslug2_7 Added LE 2-byte swap and c
John Bowler <jbowler at users.sourceforge.net>
Roger Nilsson [macosx support]
This Debian package of upslug2 was first put together by Martin Michlmayr
<email@example.com> in Januar
Browse inside upslug2_11-3_amd64.deb
Results 1 - 1 of 1Search over 15 billion files
© 1997-2017 FileWatcher.com