Filewatcher File Search File Search
Catalog
Content Search
» » » » alsa-driver_1.0.23+dfsg-2.debian.tar.bz2 » Content »
pkg://alsa-driver_1.0.23+dfsg-2.debian.tar.bz2:218729/debian/  info  downloads

changelog-old.Debian

Later entries can be found in changelog.Debian

alsa-driver (1.0.6a-11) unstable; urgency=medium

  * Thomas Hood:
    - debian/alsa-base.(preinst|postinst):
      + Remove special upgrade-from-1.0.6a-8 code
    - debian/patches/15_ppc_awacs_num_controls.dpatch:
      + Backport from 1.0.7rc1  (Closes: #279731)
    - debian/po/ja.po:
      + Apply patch kindly provided by Kenshi Muto and run
        debconf-updatepo  (Closes: #280115)
    - debian/control:
      + alsa-base: Suggest alsa-oss  (Closes: #280988)
    - debian/alsa-source.control:
      + alsa-modules*: Recommend libasound2 (>= 1.0.6)
  * Jordi Mallach:
    - debian/alsa-source.rules:
      + don't symlink alsa-modules docs dir to alsa-base's, as this is
        forbidden by policy. Instead, add a pointer to alsa-source's
        documentation in alsa-modules-i386's copyright file.
        (Closes: #262152)
    - debian/alsa-source.control:
      + remove ancient Conflicts and Replaces for alsa-modules-0.4 and
        alsa-modules-0.5.

 -- Jordi Mallach <jordi@debian.org>  Wed, 17 Nov 2004 12:34:24 +0100

alsa-driver (1.0.6a-10) unstable; urgency=medium

  * Thomas Hood:
    - alsa-base.postinst:
      + Don't fail if alsa-base.permissions absent  (Closes: #279588)
  * Jordi Mallach:
    - debian/alsa-base.templates: don't mark the default option for
      translation.
    - debian/po/*: updated.

 -- Jordi Mallach <jordi@debian.org>  Thu,  4 Nov 2004 11:04:26 +0100

alsa-driver (1.0.6a-9) unstable; urgency=medium

  * Thomas Hood:
    - debian/module-blacklist:
      + Add bt878.  Thanks to Reinhard Tartler for the tip.
        (Closes: #279327)
    - debian/rules, debian/alsa-base.(preinst|postinst|postrm|dirs):
      + Put alsa-base.dev in /etc/alsa/dev.d/ and symlink to it
        from /etc/dev.d/snd/controlC[0-3]/alsa-base.dev.  This
        scheme avoids running the script when it isn't needed.
        (Closes: #279405)
    - alsa-base.permissions:
      + Eliminate at the request of the udev maintainer
        (Closes: #279486)
    - alsa-base.dev
      + Take into account the possibility that /usr/ and/or /var/
        may not be mounted when this script runs.  Thanks to Marco
        d'Itri for the tips.  (Closes: #279325)
  * Jordi Mallach:
    - debian/alsa-base.preinst: add the missing #DEBHELPER# marker.
    - debian/alsa-modules.post{inst,rm}: likewise.

 -- Jordi Mallach <jordi@debian.org>  Wed,  3 Nov 2004 18:31:57 +0100

alsa-driver (1.0.6a-8) unstable; urgency=medium

  * Thomas Hood:
    - /etc/dev.d/sound/alsa-base.dev
      + Add.  Runs "alsactl restore" after control
        device is created  (Closes: #273090)
    - /etc/udev/permissions.d/alsa-base.permissions
      + Add.  Sets permissions on ALSA snd devices.
    - debian/alsa-base.config
      + Fix quotation bug  (Closes: #278766)
    - debian/control:
      + alsa-headers now Depends on libasound2-dev >= 1.0.6-3.
        This is required in order to guarantee that alsa-headers
        can be removed; older libasound2-dev releases depended on
        alsa-headers.
      + alsa-base now Conflicts with discover1 << 1.7.3 since 
        those versions didn't allow modules to be blacklisted
        (Closes: #278301)
      + alsa-base now Suggests udev
    - debian/alsa-source.control:
      + Clarify info re: alsa-modules modules versus kernel modules
      + Shorten Description
    - debian/module-blacklist:
      + Remove dmasound; add dmasound_core and dmasound_pmac
    - pt_BR.po:
      + Update by Andre Luis Lopes  (Closes: #278731)

 -- Jordi Mallach <jordi@debian.org>  Mon,  1 Nov 2004 12:35:30 +0100

alsa-driver (1.0.6a-7) unstable; urgency=medium

  * Thomas Hood:
    - debian/control:
      + Tweak descriptions to make it clearer that alsa-base is
        the base package for the ALSA drivers
    - debian/alsa-source.control:
      + Don't Recommend pcmcia packages; only suggest them
  * Jordi Mallach:
    - debian/module-blacklist:
      + Add dmasound, which has an ALSA replacement: snd-powermac.
        Thanks to Simon Raven for the information.

 -- Jordi Mallach <jordi@debian.org>  Thu, 28 Oct 2004 00:49:58 +0200

alsa-driver (1.0.6a-6) unstable; urgency=medium

  * Thomas Hood
    - asound-debian.h:
      + Eliminate
    - alsa-base.postinst:
      + Use cp insted of cat  (Closes: #273092)
    - debian/rules:
      + Generate discover "skiplist" and hotplug "blacklist" from
        a common "module-blacklist" file
    - module-blacklist:
      + Add the following OSS drivers:
        . ac97_plugin_wm97xx
        . ad1816
        . awe_wave
        . harmony
        . sequencer
        . soundcard
        . via82cxxx
        Don't add the following OSS drivers for which there are
        no obvious ALSA replacements:
        . dmasound
        . hal2
        . ics2101
        . ite8172
        . msnd
        . nec_vrc5477
        . vidc
        . vwsnd
        . waveartist 
        Please let us know if any of the latter should also be
        added to the blacklist.

 -- Jordi Mallach <jordi@debian.org>  Mon, 25 Oct 2004 17:43:40 +0200

alsa-driver (1.0.6a-5) unstable; urgency=medium

  * Thomas Hood:
    - debian/control:
      + alsa-headers: Don't Depend on libasound2-dev >> 1.0.6-2
        since this makes alsa-lib temporarily unbuildable due to
        libasound2-dev 1.0.6-2 Depending on alsa-headers.

 -- Jordi Mallach <jordi@debian.org>  Tue, 19 Oct 2004 17:50:35 +0200

alsa-driver (1.0.6a-4) unstable; urgency=medium

  * Thomas Hood:
    - Remove more XSIisms
    - debian/rules:
      + Fix ownership and perms of installed files  (Closes: #275386)
      + Install alsa-base.discover as /etc/discover.d/alsa-base
        instead of as /usr/share/doc/alsa-base/alsa-base.discover.
        This stops discover1 from loading OSS modules at boot time
        so that ALSA modules can be loaded instead.  This only works
        with discover1 >= 1.7.2.  If you have an earlier version of
        discover1 or if you have discover (version 2) then this
        blacklist file has no effect.
        (Closes: #220616, #265845, #275794, #276272)
    - debian/control:
      + Tweak description
      + Suggest discover1 (>= 1.7.2) which is the first release that
        has the blacklisting feature
    - alsa-base.config:
      + Tweak
    - alsa-base.README.Debian:
      + Update
    - alsa-source.control
      + Tweak description
      + alsa-modules-x.y.z should depend on module-init-tools >= 3.1 so
        that /lib/modules/x.y.z/updates gets magic priority
    - alsa-source.rules
      + Put modules in /lib/modules/x.y.z/updates/alsa/ rather than in
        /lib/modules/x.y.z/alsa/ so that module-init-tools's depmod
        gives them priority over the ones from the kernel.
        (Closes: #261618)
    - alsa-modules.postrm
      + Do depmod -a  (Closes: #276985)
      + Don't run the initscript stop method
  * Jordi Mallach:
    - debian/control:
      + Make alsa-headers a dummy package for transitional purposes, as
        it's apparently not needed any more.  Packages should use
        libasound2-dev instead.
    - debian/alsa-headers.{dirs,headers}:
      + Remove
    - debian/rules:
      + Remove alsa-headers-related bits

 -- Jordi Mallach <jordi@debian.org>  Mon, 18 Oct 2004 18:42:38 +0200

alsa-driver (1.0.6a-3) unstable; urgency=medium

  * Thomas Hood:
    - Fix up copyright file
    - Add 09_powerpc_build_fixes.dpatch:
      + Patch pmac.patch so that it applies to pmac.c again.
        Fixes build on powermac.  (Closes: #272946)
    - alsa-base.config:
      + Fix failure to configure if alsactl_store_on_shutdown not set
        in /etc/default/alsa.  Thanks to David Mikolajczyk for the
        patch.  (Closes: #273885)

 -- Jordi Mallach <jordi@debian.org>  Tue, 28 Sep 2004 21:44:17 +0200

alsa-driver (1.0.6a-2) unstable; urgency=medium

  * Thomas Hood:
    - alsa-base.postrm
      + purge additional legacy configuration files
    - alsa-base.postinst
      + Delete dangling symlinks in module loader configuration dirs
        (Closes: #265781)

 -- Jordi Mallach <jordi@debian.org>  Sun, 26 Sep 2004 20:04:07 +0200

alsa-driver (1.0.6a-1) unstable; urgency=medium

  * New upstream release.
  * Steve Kowalik:
    - Fix up patches #4, #9, #10 and #15 to apply cleanly.
    - Rename 'autosave always' to 'always autosave'. Both settings will be
      honoured. (Closes: #269196)
    - Change the default value of alsactl_store_on_shutdown to
      'always autosave'. Also rewrite the comment to list the 3 settings,
      and what the 3 settings do. Also change the postinst to only run 
      alsactl store if the value is 'always autosave'. (Closes: #269214)
    - Honour changes made to /etc/default/alsa in alsa-base's config
      script. (Closes: #261924, #268041)
    - Stop using /var/lib/alsa-base in alsa-modules, and don't create the
      directory in alsa-base. (Closes: #269211)
    - Include a bunch of new cards in alsa-source's debconf prompting:
      + atiixp-modem: PCI: ATI IXP 150/200/250 Modem
      + cs46xx-new-dsp: Cirrus Logic (Sound Fusion) New DSP support
      + emu10k1x: PCI: EMU10K1 (SB Live! or E-mu APS, Dell OEM Version)
      + fm801-tea575x: PCI: ForteMedia FM801 + TEA5757 tuner
      + seq-dummy: Sequencer dummy client
      + sun-amd7930: SPARC: Sun AMD7930
      + sun-cs4231: SPARC: Sun CS4231
      + (Closes: #249505)
    - Update French Debconf translation. (Closes: #267939)
      (thanks, Christian Perrier)
    - Update Spanish Debconf translation. (Closes: #268480)
      (thanks, Carlos Galisteo)
  * Jordi Mallach:
    - Update Catalan Debconf translation.
    - Don't try to install alsa-modules.dirs which is now gone.
    - Update debian/patches/10_disable_gcc_version_check2.dpatch.
  * Thomas Hood:
    - /etc/init.d/alsa: Extensive changes
      + Clean up indentation
      + Don't fail if kill fails because of disappeared process
        (Closes: #269494)
      + Tell the user if processes couldn't be stopped or if
        modules couldn't be unloaded  (Closes: #269453)
      + Send usage to stderr and exit 3 (as per LSB)
      + Use more functions
      + On restart, attempt start even if stop fails
      + On force-reload, start after force-stop
      + Don't pad '...' with spaces (as per policy 9.4)
      + On start, don't fail if attempt to restore mixer levels fails.
        In order to avoid lost races this should be done by the module
        loader (see #268221).  (Closes: #270419)
    - /etc/default/alsa
      + Try to improve comments some more
    - /etc/apm/event.d/alsa
      + Rewrite
      + Remove redundant fuser commands.  Calling the initscript with
        "force-stop" should do everything that is required.
        (Closes: #269282)
    - alsa-base.postinst
      + Clean up
      + Run confmodule at the beginning since it restarts the script
      + Eliminate use of test's -a and -o options
      + exit 1 on illegal argument
      + Use '.dpkg-old' as backup-file extension
      + Only initialize asound.state if it doesn't already
        exits (Closes: #188595)
      + Update from debconf database even if conf file is initialized
        (Closes: #269212)
      + Use cat instead of cp in order to handle the case
        where people have replaced conf files by symlinks
      + Always use -f option with mv and rm
      + Replace 'autosave always' by 'always autosave'
    - debian/control:
      + Make alsa-base Depend on alsa-utils >= 1.0.6-1
    - debian/po/nl.po:
      + Update, thanks to cobaco  (Closes: #270316)
    - debian/po/da.po:
      + Update, thanks to Morten Brix Pedersen  (Closes: #272510)
    - debian/po/*:
      + Replace 'autosave always' by 'always autosave'
      + Fix typos, run debconf-updatepo

 -- Jordi Mallach <jordi@debian.org>  Wed, 22 Sep 2004 14:45:19 +0200

alsa-driver (1.0.5a-3) unstable; urgency=low

  * Steve Kowalik:
    - Don't kill processes if force_stop_modules_before_suspend is true
      in /etc/default/alsa. (Closes: #266272, #266740, #267257)
    - Reference the correct file in NEWS.Debian. (Closes: #267099)
    - Replace 'a option' with 'an option' in alsa-source.templates, and 
      re-run debconf-updatepo. (Closes: #266171)

 -- Steve Kowalik <stevenk@debian.org>  Mon, 23 Aug 2004 21:42:41 +1000

alsa-driver (1.0.5a-2) unstable; urgency=medium

  * Steve Kowalik:
    - Remove XSIims in alsa-base's init script. (Closes: #254622)
      (thanks, Clint Adams)
    - Heaven forbid that we actually remove features from the package, so
      reimplement force-stop in the init script, and tell the apm script
      to run force-stop on suspend. Getting modules to load on resume is
      left as an exercise for the user. (Closes: #249541, #253980)
    - Alias force-reload to force-stop. (Closes: #264226)
    - Add audio module to our hotplug blacklist. (Closes: #257635)
    - Automatically load OSS compat modules for sequencers and mixers.
      (Closes: #246570, #258543)
    - 1.0.5a sets CONFIG_SND_CS46XX_NEW_DSP=y. (Closes: #249505)
    - update-modules may spit out warning messages that confuse debconf.
      Redirect stdout to /dev/null when calling update-modules in alsa-base's
      postrm. (Closes: #261853)
    - Fix up now erroneous points from alsa-base's README.Debian.
      (Closes: #248881)
    - Update Dutch Debconf translation. (Closes: #260293) (thanks, cobaco)
    - Update Brazilian Portuguese translation. (Closes: #262601)
      (thanks, Andre Luis Lopes)
  
 -- Steve Kowalik <stevenk@debian.org>  Sun, 15 Aug 2004 12:10:09 +1000

alsa-driver (1.0.5a-1) unstable; urgency=low

  * New upstream release.
  * Steve Kowalik:
    - fuser may exit non-zero. Fix the apm event script. (Closes: #247109)
    - Update the Czech debconf translation. (Closes: #251678)
  * Jordi Mallach:
    - debian/po/da.po: Add Danish translation (thanks, Michael Kristensen;
      closes: #253347).

 -- David B. Harris <dbharris@debian.org>  Wed,  9 Jun 2004 19:37:25 -0400

alsa-driver (1.0.4-3) unstable; urgency=low

  * Steve Kowalik:
    - Oops. Only move files in alsa-base's postinst if $filename contains
      something. (Closes: #246064)
    - Run update-modules in the postinst for alsa-base. (Closes: #246311)
    - Debconf translations:
      + Add Turkish. (Closes: #246069) (thanks, Recai Oktas)
      + Update Japanese. (Closes: #246438) (thanks, Kenshi Muto)
      + Update French. (Closes: #246791) (thanks, Christian Perrier)
  * Jordi Mallach:
    - debian/po/ca.po: Update Catalan translation.
  * David B. Harris:
    - debian/alsa-base.init: Put /usr/local/{sbin,bin} ahead of the
      system-wide versions in $PATH. Thanks to Tollef for noticing this.

 -- Steve Kowalik <stevenk@debian.org>  Sun,  2 May 2004 20:47:19 +1000

alsa-driver (1.0.4-2) unstable; urgency=low

  * Steve Kowalik:
    - Actually do some work on this package!
    - Check for the presence of either devfs or udev before creating device 
      nodes in alsa-base's postinst. (Closes: #243876)
    - Rewrite the init script to not load modules. Loading modules is now 
      the responsibility of the user, or hotplug.
      (Closes: #195516, #203491, #210440, #232380, #237003, #237452, #240594)
      (Closes: #244068, #245783)
    - Stop alsa-base depending on lsof and procps.
    - Change the description for alsa-base to no longer mention module
      loading.
    - Rewrite the debconf-age for alsa-base:
      + Stop asking which modules to load. (Closes: #199739, #218655)
      + Only ask one question about saving mixer settings, in the style of
        setserial.
      + This means we can stop doing vile things to the debconf templates in
        debian/rules.
      + This also means that alsa can restore on bootup, and not save on
        shutdown. (Closes: #191501, #232854)
    - Remove the files under /etc/alsa/modutils, and the symlinks
      into /etc/modprobe.d and /etc/modutils.
    - Provide an alsa-base file under /etc/modprobe.d and /etc/modutils 
      which will load the OSS compatibility modules.
      (Closes: #229486, #240594)
    - Blacklist (for hotplug) and skip (for discover) the OSS sound modules.
      Note that we can include the blacklist automatically for hotplug, but
      discover doesn't contain the infrastructure for that, so the file for 
      discover is in /usr/share/doc/alsa-base.
      (Closes: #238278, #238694, #240125, #242720)
    - Due to the fact that the init script no longer touches modules, this
      script has been gutted to a shadow of its former self. (Closes: #238994)
    - Stop using install -d so liberally in debian/rules.
    - Rename debian/po/no.po to debian/po/nb.po.
    - Correct typo in debian/po/fr.po. (Closes: #245031) (thanks,
      Pierre Machard)
    - Remove debian/alsa-path, I can't see anything at all that references it.

 -- Steve Kowalik <stevenk@debian.org>  Mon, 26 Apr 2004 15:27:55 +1000

alsa-driver (1.0.4-1) unstable; urgency=low

  * New upstream release.
  * Jordi Mallach:
    - debian/po/cs.po: new Czech translation of debconf templates
      (thanks Miroslav Kure <kurem@upcase.inf.upol.cz>; closes: #235644).
    - debian/alsa-modules.postinst: apply patch from Jamin W. Collins to
      avoid unresolved symbols when calling depmod on alsa-modules's
      postinsts (closes: #236543).
    - debian/control: change Maintainer name to "Debian ALSA Maintainers".
    - debian/alsa-base.apm: apply suggestions from Marius Gedminas to
      improve the detection of ALSA devices and the usage of fuser to stop
      processes, thanks! (closes: #238994).

 -- Jordi Mallach <jordi@debian.org>  Wed, 14 Apr 2004 00:11:52 +0200

alsa-driver (1.0.3-1) unstable; urgency=high

  * New upstream release
  * Jordi Mallach:
    - debian/control, debian/alsa-source.control: sync descriptions with
      alsa-lib's.
  * David B. Harris:
    - Re-disable the GCC version-check warning message, as we already check
      for this in debian/rules. I believe it got lost in the 1.0.2c-1 upload.
      It's just a cosmetic thing, as the logic to actually do the
      version-check was still disabled. (Closes: #234225)
    - Change my Uploaders: email address from my private address to
      dbharris@debian.org
    - debian/alsa-base.init: Produce a more helpful error message when
      'alsactl restore' fails. (Closes: #234233)
    - debian/control (alsa-base): Add version to alsa-utils dependency,
      1.0.2-2, so that the postinst's running of alsactl gets its state from
      the new location (/var/lib/alsa/asound.state)
    - debian/alsa-base.init: Add support to set the
      runlevels within which mixer settings will be saved (the same setting is
      also used to determine *from* which runlevels we'll be saving mixer
      settings). Now if you boot into single-user mode and reboot right from
      there, mixer settings won't be saved (so on your next boot you'll have
      your normal levels, not all-muted). (Closes: #233974)
    - Transition from /etc/modutils/alsa/0.9 to /etc/modutils/alsa/1.0
      (Closes: #233752):
      + debian/alsa-base.config: Use /etc/alsa/modutils/1.0 if it exists, and
        if it doesn't try to use /etc/alsa/modutils/0.9. Additionally, stop
        replacing /etc/modutils/alsa with a symlink if it's a non-symlink.
      + debian/alsa-base.examples, debian/modutils-0.9.conf: Move to
        modutils-1.0.conf
      + debian/alsa-base.postinst: Migrate /etc/alsa/modutils/0.9 to
        /etc/alsa/modutils/1.0, if the latter doesn't exist. Update
        /etc/{modprobe.d,modutils}/alsa symlinks if and only if they point to
        0.9
      + debian/alsa-base.postrm: Remove /etc/{modprobe.d,modutils}/alsa and
        known conffiles /etc/alsa/modutils/ on purge
      + debian/alsa-base.README.Debian: Update
      + debian/alsa-source.README.Debian: Update
    - debian/alsa-common.templates: Remove extraneous "," which would cause
      'harmony (PCI: Harmony/Vivace sound chip)' to show up as two options.
      Add two new chipsets, pc98-cs4232 and atiixp
    - debian/patches/10_disable_gcc_version_check{1,2}.dpatch: Sync with new
      upstream release

 -- David B. Harris <dbharris@debian.org>  Sat, 28 Feb 2004 12:49:38 -0500

alsa-driver (1.0.2c-3) unstable; urgency=low

  * David B. Harris:
    - Brown paper bag upload.
    - debian/alsa-common.templates:
      + Put module name where it's supposed to be, instead of a descriptive
        string. This broke debconf configuration for some people.
        (Closes: #232942)

 -- David B Harris <david@eelf.ddts.net>  Sun, 15 Feb 2004 18:56:54 -0500

alsa-driver (1.0.2c-2) unstable; urgency=low

  * Update debconf cardlist:
    - Add usb-usx2y (Tascam US-122 and US-428)
    - Add bt87x (Bt878/Bt879 TV card audio)
    - Add harmony (Harmony/Vivace sound chip)
    - Add hdspm  (RME HDSP MADI board)
    - Add intel8x0m (Intel i8x0 software modem thing)

 -- David B Harris <david@eelf.ddts.net>  Sat, 14 Feb 2004 19:34:41 -0500

alsa-driver (1.0.2c-1) unstable; urgency=low

  * New upstream release.
    - With this version, alsa-source now builds against 2.6.x kernels.
      (Closes: none - what the hell is up with that?)
  * David B. Harris:
    - Split debian/patches/10_disable_gcc_version_check into two different
      patches (one for configure.in, one for configure) to make
      forward-porting to new versions easier.
  * Jordi Mallach:
    - debian/alsa-modules.postinst: apply patch from Michel Dänzer to run
      depmod correctly regardless what kernel version you're running when
      you install an alsa-modules package, thanks! (closes: #231973)

 -- Jordi Mallach <jordi@debian.org>  Sun, 15 Feb 2004 01:07:37 +0100

alsa-driver (1.0.1-1) unstable; urgency=low

  * New upstream release. (Closes: #224505)
    - This version should build on 2.4.23 and 2.4.24. (Closes: #212171)
  * David B Harris:
    - The alsaconf binary package has now been integrated into the alsa-utils
      binary package:
      - Remove alsaconf stanza from debian/control
      - Remove alsaconf files: alsaconf.8, alsaconf.dirs, alsaconf.manpages,
        alsaconf.menu, patches/98_debian_alsaconf.dpatch
      - Remove 98_debian_alsaconf from debian/patches/00list
  * Steve Kowalik:
    - Patches #4 and #99: Unfuzz.
    - Patch #5: Remove; it has been applied upstream.
    - Patch #10: Regenerate.
    - Loosen Depends and Conflicts on lsof{-2.2,}. (Closes: #227514)

 -- Jordi Mallach <jordi@debian.org>  Sun, 18 Jan 2004 04:28:09 +0100

alsa-driver (0.9.8-3) unstable; urgency=low

  * Jordi Mallach:
    - debian/control: make the lsof-2.2 conflict versioned, alsa-base can't be
      installed otherwise (closes: #223822, really caused by #108341).
    - debian/changelog: recode as UTF-8.

 -- Jordi Mallach <jordi@debian.org>  Sat, 13 Dec 2003 22:38:26 +0100

alsa-driver (0.9.8-2) unstable; urgency=low

  * Steve Kowalik:
    - Stop the init script bombing out if it can't load any driver modules.
      (Closes: #221038)
    - Drop debconf question about loading OSS compatibility modules. We now
      perform auto-detection during boot-up. (Closes: #222350)
    - Bump the Depends on lsof to (>= 4.64-1). (Closes: #221295, #221809)
    - Apply patch to the init script so that it will work with both modules
      configured, or ALSA compiled statically. (Closes: #221292)
    - Drop Depends on kernel-image to Recommends. (Closes: #216253)
    - Add six new cards to the debconf list. (Closes: #222205)
      + au8810 (PCI: Aureal Advantage)
      + au8820 (PCI: Aureal Vortex)
      + au8830 (PCI: Aureal Vortex 2)
      + mixart (PCI: Digigram miXart)
      + pdaudiocf (PCMCIA: Sound Core PDAudioCF)
      + usb-us428 (USB: Tascam USB US-428)
    - Remove all the instances of the word 'driver' from the debconf list.
    - Mention alsaconf in alsa-base's README.Debian. (Closes: #222349)
    - Use the user's /etc/default/alsa to run sed over, rather than the
      default example.
    - Don't Build-Depend on kernel-headers.
    - Bump alsa-source's pseudo-source package's Standards-Version to 3.6.1.
  * Jordi Mallach:
    - debian/control: make alsa-base conflict with old lsof-2.2, just in case.
    - debian/po/de.po: German translation update (thanks, Patrick Willam,
      Tomas and Friedemann; closes: #223103).

 -- Steve Kowalik <stevenk@debian.org>  Fri, 12 Dec 2003 23:35:01 +1100

alsa-driver (0.9.8-1) unstable; urgency=low

  * New upstream release. (Closes: #218907, #219495)
    - alsaconf no longer hangs if alsa is running. (Closes: #207482)
  * Steve Kowalik:
    - Patches #4 & #98: Unfuzz.
    - Patches #5, #10, #14: Updated.
    - Patch #16: New; compile core/oss/snd-pcm-oss.c with
      -fno-omit-frame-pointer. (Closes: #195837, #199991, #201700)
    - Patch #99: Update to also fix how install is called in the
      install-scripts target. (Closes: #213941)
    - Add a 'alias /dev/dsp* snd-pcm-oss' to the modules files.
      (Closes: #208458)
    - Fix /etc/apm/event.d/alsa to work with devfs. (Closes: #204408)
    - Drop the Suggests on alsa-utils in alsa-base, we already Depend on it.
    - Fix a slight bug in alsa-base's config script to work with
      pre-configuration. (Closes: #198225, #203492, #212687, #217400)
    - Also bump alsa-source's Depends on debhelper to >= 4.0.0.
    - Speed up the init script by using lsof when finding processes using
      sound devices. (Closes: #200628, #202150)
    - Fix how $CC is passed to ./configure.
    - Update Japanese Debconf translation. (Closes: #210370) (thanks, Kenshi
      Muto)
  * Jordi Mallach:
    - debian/po/nl.po: Updated Dutch translation (thanks, Bart Cornelis;
      closes: #212994).
    - debian/alsa-source.control: bump alsa-source's build-depend on
      debhelper to >> 4.0.0 (closes: #220344).
    - Patch #98: Fix paths to lsmod and lspci (closes: #215059, #214870).

 -- Steve Kowalik <stevenk@debian.org>  Fri, 14 Nov 2003 23:28:22 +1100

alsa-driver (0.9.6-5) unstable; urgency=low

  * Steve Kowalik:
    - Patch #14: Updated; Change a < to <= to allow modules compiled against
      2.4.22 to build. (Closes: #208797, #209233, #209166, #209267)
    - Create /etc/modprobe.d, and symlink in the modules file.
    - Apply patch against /etc/init.d/alsa. (Closes: #208800)
  * David B. Harris:
    - debian/alsa-source.README.Debian: Adjust example variable KVERS to
      include all the elements common to version strings these days
      (ie: 2.4.21-5-k7). (Closes: #208771)
  * Jordi Mallach:
    - debian/modules-snippet.conf: remove obsolete device_mode parameter
      (closes: #209001).
    - debian/po/fr.po: Updated French translation by Christian Perrier
      <bubulle@debian.org> and debian-l10n-french (closes: #208784).

 -- Steve Kowalik <stevenk@debian.org>  Tue,  9 Sep 2003 08:53:40 +1000

alsa-driver (0.9.6-4) unstable; urgency=low

  * Steve Kowalik:
    - Qualify the modprobe.d symlink. (Closes: #208749)
    - Patch #12: Remove; the submitter mentions that it isn't needed with
      0.9.6. 

 -- Steve Kowalik <stevenk@debian.org>  Fri,  5 Sep 2003 09:18:07 +1000

alsa-driver (0.9.6-3) unstable; urgency=low

  * Steve Kowalik:
    - Patch #14: New; fixes declaration of irqreturn_t. (Closes: #207649)
    - Patch #15: New; write to another register first fixing the filter
      register for es18xx. (Closes: #204147)
    - Loop over removing modules, don't just try and kill all of them at
      once. (Closes: #204163, #207418)
    - Look in /lib/modules/modprobe.conf instead of /etc/modprobe.conf.
    - Actually symlink in /etc/modprobe.d/alsa if it doesn't exist.
    - The 3 above entries allow the init script to be used on 2.4, 2.5 and 2.6
      kernels.
    - Also include $(CURDIR)/debian/alsa-source.conf when trying to read in
      values during building of alsa-source. (Closes: #199729)
  * Jordi Mallach:
    - debian/po/fr.po: French translation update by Christian Perrier and
      debian-l10n-french; thanks! (Closes: #207757).
    - debian/po/pt_BR.po: Brazilian Portuguese translation update by
      Andre Luis Lopes; thanks! (Closes: #207945).

 -- Steve Kowalik <stevenk@debian.org>  Thu,  4 Sep 2003 22:38:46 +1000

alsa-driver (0.9.6-2) unstable; urgency=medium

  * Jordi Mallach:
    - debian/devfs.conf: apply patch from Tore Anderson to fix a bad typo and
      the assumption that devfs is mounted in /dev. Thanks! (Closes: #207413)

 -- Jordi Mallach <jordi@debian.org>  Wed, 27 Aug 2003 23:22:47 +0200

alsa-driver (0.9.6-1) unstable; urgency=low

  * New upstream release. (Closes: #201162)
  * Steve Kowalik:
    - Patch #12: New; Fixes EMU8000 PNP auto-configuration. (Closes: #197378)
    - Bump the Build-Depends-Indep on debhelper to 4.1.17. (Closes: #199940)
    - Update French debconf translation. (Closes: #200725) (thanks,
      Christian Perrier)
    - Import Dutch debconf translation. (Closes: #204572)
    - Change the wording of a few questions. (Closes: #200726)
    - Write a new version of program-wrapper. (Closes: #200686)
    - Drop UID and GID parameters from modules-snippet and the example 0.9
      configuration. (Closes: #205920)
    - Also symlink /etc/alsa/modutils/0.9 to /etc/modprobe.d/alsa as well.
    - Depend on modutils, or module-init-tools. The order will change when
      2.6 is more widely used. (Closes: #206226)
    - Quote $(CC) in alsa-source's debian/rules. (Closes: #204281)
    - 0.9.6 references iface_no and altno in usbaudio.c correctly.
      (Closes: #204414)
    - Don't keel over in alsa-modules install if depmod exits with a non-zero
      exit status. (Closes: #201817)
    - Call rmmod -r with kernel 2.4, and modprobe -r with kernel 2.6 in the
      init script. (Closes: #194230)
    - Please note that snd-intel8x0 causes an oops upon load with this
      version. We are looking for a fix currently.
    - Update to Standards-Version 3.6.1; no changes needed.
  * David B. Harris:
    - Import new upstream version to our CVS tree.
      + Update 10_disable_gcc_version_check to new upstream code
      + Remove 11_makefile_conf_shell_bash, the new upstream code isn't
        Bash-specific any more
    - Only create /dev/sndstat link ourselves when devfsd isn't managing /dev,
      and add magic to /dev/devfs/conf.d/alsa so that devfsd does it (thanks
      very much to Russell Coker, who did all the work) (Closes: #198702)
    - Support 'alias foo-bar off' and similar in /etc/modules.conf
      (Closes: #199190)
    - Format alsa-base's NEWS.Debian correctly. (Closes: #199930)
  * Jordi Mallach:
    - debian/po/ca.po: Updated Catalan translation.

 -- Steve Kowalik <stevenk@debian.org>  Tue, 26 Aug 2003 21:47:00 +1000

alsa-driver (0.9.4-1) unstable; urgency=low

  * New upstream release
  * Steve Kowalik:
    - Patch #4: Unfuzz.
    - Patches #5 & #10: Regenerate; Upstream files had changed too much.
    - Patch #9: Rip out half of it; The need_resched() issue has been fixed
      on Alpha, however, the Pinnacle driver still fails to build due to
      braindead usage of i386-only ISA macros.
    - Patch #11: New; Fix potential build failure by correcting 2 bashisms in
      Rules.make.
    - Add a binary target to debian/rules in alsa-source.
  * David B. Harris
    - Merge tree with ALSA's 0.9.4 release.
    - Let /etc/init.d/alsa unload the ALSA modules if it can't store mixer
      settings. (Closes: #194381)

 -- Steve Kowalik <stevenk@debian.org>  Fri, 13 Jun 2003 20:32:14 +1000

alsa-driver (0.9.3c-1) unstable; urgency=low

  * New upstream release
  * Steve Kowalik:
    - Kick the depends in alsa-source to alsa-base (>= 0.9.3c-1), due to
      /dev/snd going away.
    - Use 'read REPLY' instead of 'read', which stops dash complaining.
    - Deal with stat output starting with 'e' (OSS) or '74' (ALSA).
    - Have stat follow symlinks.
    - Patch #10: New; disables gcc version compare check in ./configure, as
      debian/rules already handles this.
    - Patches #4, #9, #98 and #99: Unfuzz.
  * David B. Harris:
    - Remove patches which fixed sparc64, the azt2320, opti2320, sb16 and
      ymfpci drivers. They have been merged upstream or were from CVS.
    - /proc/asound/dev/ is no longer created by 0.9.3c drivers. We linked
      /dev/snd/ to /proc/asound/dev/ previously. Now, create the device nodes
      statically.

 -- Steve Kowalik <stevenk@debian.org>  Fri, 30 May 2003 00:54:37 +1000

alsa-driver (0.9.3a-2) unstable; urgency=low

  * Steve Kowalik:
    - Fix a long standing bug where one space was causing the template to
      display ". . " instead of .\n.
    - Partially rewrite alsa-source's config script to deal with config file
      changes and preconfigure properly. (Closes: #193086)
    - Patch #9: New, fixes build problems on Alpha. (Closes: #191553)
    - Patch #10: New, backport of ymfpci driver from CVS.
    - Update ja.po. (Closes: #193973) (thanks, Kenshi Muto)
    - Bump to Standards-Version 3.5.10; no changes needed.
    - Also bump alsa-source's control to 3.5.10; no changes needed there,
      either.
  * David B Harris:
    - Move /etc/alsa/alsa-base.conf to /etc/default/alsa (Policy 10.3.2)
    - Refactor/rewrite /etc/init.d/alsa for idempotency and reliability
    - Stop stopping/starting ALSA on upgrade of alsa-base, only alsa-modules
      packages should do this.
    - Lintian cleanups: remove dependencies on awk, made the debconf
      dependency versioned, /usr/share/alsa-base/snddevices made executable
  * Jordi Mallach:
    - po/ca.po: Updated Catalan translation.

 -- Steve Kowalik <stevenk@debian.org>  Thu, 22 May 2003 00:23:08 +1000

alsa-driver (0.9.3a-1) unstable; urgency=low

  * New upstream release
  * Steve Kowalik:
    - Patch #5: New, patch from Bas Zoetekouw to configure.in that was applied
      and autoconf'd to produce a configure patch. Checks if tty->count is an
      atomic_t or int. (Closes: #189170)
    - Patch #6: New, fixes build failure in azt2320 by not needing
      CONFIG_PNP defined.
    - Patch #7: New, fixes build failure in opti9xx by testing CONFIG_PNP.
    - Patch #8: New, fixes build failure in sb16 by testing for CONFIG_PNP.
    - Don't exit if we can't load any modules in the init script - ALSA may
      be statically compiled. (Closes: #191882)
  * David B Harris:
    - Patches removed because they were integrated upstream:
        + 02_emu10k1_borrowed_from_cvs.dpatch
        + 03_via82xx_borrowed_from_cvs.dpatch
    - Update the following patches to apply cleanly:
        + 01_sparc64_fixes.dpatch
        + 04_make_minus_j_fix.dpatch
        + 99_debian_makefile_depmod.dpatch

 -- Steve Kowalik <stevenk@debian.org>  Sun, 11 May 2003 01:31:27 +1000

alsa-driver (0.9.2-7) unstable; urgency=low

  * Steve Kowalik:
    - Also seed alsactl_store_on_shutdown in alsa-base's .config.
    - Rewrite part of alsa-base's .config to support backing up.
      (Closes: #189789)
    - Don't run dpkg --compare-versions on a new install.
      (Closes: #190653, #190925)
    - Patch #1: Remove the vmalloc_to_page brain-damage.
      (Closes: #189533, #190052)
    - Use $(subst) instead of the shell for working out KDREV when it contains
      an epoch. (Closes: #190292) (thanks, Herbert Xu)
    - Stop ALSA at 21 instead of 20. (Closes: #190393)
  * David B Harris:
    - Ensure that /etc/init.d/alsa can handle device names with spaces
      in them (Closes: #190018)
    - Only restore mixer settings when the user has told us to save them.
      Avoids a future bug report.

 -- Steve Kowalik <stevenk@debian.org>  Wed, 30 Apr 2003 00:53:36 +1000

alsa-driver (0.9.2-6) unstable; urgency=low

  * Steve Kowalik:
    - Add force-reload as an option to the init script. (Closes: #188624)
    - Quote some variables that I missed in the init script. (Closes: #189165)
    - Create alsa-base.conf in the postinst if it doesn't exist.
      (Closes: #188674)
    - Rewrite the config scripts for alsa-{base,source}.
      + This rewrite neatly fixes the "card_list gets asked twice" bug, since
        what was taking place is that dpkg-preconfigure would ask the question,
        and then when debconf ran the .config, it would ask again.
        (Closes: #181605)
      + Be warned that alsa-base may re-ask for your driver modules due to
        the question name changing.
      + Work around a nice bug in alsa-base's previous config, which would
        re-add the last driver module to the list every time the package was
        upgraded.
    - Patch #4: Enabled; fixes building with 'make -j'. (thanks, Colm Buckley)
      (Closes: #176166)
    - Bump Standards-Version to 3.5.9; no changes needed.
  * David B Harris:
    - Fix up variable quoting in various maintainer scripts written in shell,
      avoiding a number of future problems.
    - Fix postinst failure when $alsactl_store_on_shutdown is ""
      (Closes: #189603)

 -- Steve Kowalik <stevenk@debian.org>  Sat, 19 Apr 2003 23:40:25 +1000

alsa-driver (0.9.2-5) unstable; urgency=low

  * Steve Kowalik:
    - Apply Josh Buhl's patch to my patch (03_via82xx_borrowed_from_cvs) to
      fix build failure. (Closes: #188577)
    - Deal with alsa-source being preconfigured. (Closes: #188195)

 -- Steve Kowalik <stevenk@debian.org>  Sat, 12 Apr 2003 00:40:02 +1000

alsa-driver (0.9.2-4) unstable; urgency=low

  * Steve Kowalik:
    - Correct typo in debian/alsa-source.rules. (Closes: #188520, #188521) 

 -- Steve Kowalik <stevenk@debian.org>  Fri, 11 Apr 2003 12:32:25 +1000

alsa-driver (0.9.2-3) unstable; urgency=low

  * Steve Kowalik:
    - Bail out of building -modules if the compiler the kernel was built with
      is not installed.
    - Fix the init script to accept force-restart as an argument, and remove
      force-reload as an option. (Closes: #187447)
    - Redirect the output from modprobe -r soundcore to /dev/null.
    - Don't Provide: alsadriver in alsa-modules.
    - Have alsa-base Provide: alsa.
    - Stop Suggesting alsadriver and alsaconf in alsa-base.
    - If KVERS isn't specified, try and work it out.
    - Remove /etc/alsa/alsa-{source,base}.conf on purge. (Closes: #188257)
    - Don't try and cp the example file in alsa-base's config.
      (Closes: #188261)
    - Patch #1: Added; corrects build failure on sparc64.
    - Patch #2: Added; fixes Audigy2 brokenness - from CVS HEAD.
    - Patch #3: Added; backport via82xx, parts of intel8x0 and parts of
      ac97_codec from CVS HEAD.
    - Patch #98: Correct the filename inside of the file.
  * David B. Harris:
    - Support for make-kpkg's $(KPKG_DEST_DIR) variable, which specifies
      which directory the built .debs belong.
    - alsa-source.rules: Stop configure from being run every build, and
      instead only run it when required.

 -- Steve Kowalik <stevenk@debian.org>  Fri, 11 Apr 2003 00:34:33 +1000

alsa-driver (0.9.2-2) unstable; urgency=low

  * Steve Kowalik:
    - Deal with not being able to pull values from /etc/alsa/alsa-source.conf.
      (Closes: #186375)
    - Allow an epoch to be specified in KDREV. (Closes: #186514)
    - Have the init script bail if you don't run it as root. (thanks, Alex
      Samad)
    - Rip debconf-age out of alsa-modules, it's not needed.
    - Stop alsa-modules depending on debconf.

 -- Steve Kowalik <stevenk@debian.org>  Wed,  2 Apr 2003 22:43:18 +1000

alsa-driver (0.9.2-1) unstable; urgency=low

  * New upstream release.
  * Steve Kowalik:
    - Deal with being asked for a long description for 'done'.
      (Closes: #185267)
    - Convert alsa-source itself to debian/compat, and trawl through
      debian/rules making some fixes.
  * David B. Harris:
    - New upstream CVS merging. 

 -- Steve Kowalik <stevenk@debian.org>  Wed, 26 Mar 2003 23:46:16 +1100

alsa-driver (0.9.1-2) unstable; urgency=low

  * Steve Kowalik:
    - Stop removing /etc/asound.conf and /etc/sound/asound.conf in the
      postinst and postrm. (Closes: #184615)
    - Update Brazilian Portuguese translation. (Closes: #183303) (thanks,
      Andre Luis Lopes)
    - Deal with leading whitespace in the /etc/alsa/modutils/0.9 file.
      (thanks, Adam Hewitt)
  * David B. Harris:
    + debian/alsa-base.postinst: Symlink /etc/modutils/alsa to
      /etc/alsa/modutils/0.9, not /etc/modutils/alsa/0.9
      (Closes: #184924)

 -- Steve Kowalik <stevenk@debian.org>  Mon, 17 Mar 2003 23:15:19 +1100

alsa-driver (0.9.1-1) unstable; urgency=low

  * New upstream release.
  * Steve Kowalik:
    - Handle being asked for a long description for all. (Closes: #184466)
    - Stop calling update-modules in the init script. (Closes: #184454)
    - Tighten when we reset alsa-base/card_list.
    - Convert alsa-base to the great idea I got for alsa-source's config.

 -- Steve Kowalik <stevenk@debian.org>  Sat, 15 Mar 2003 01:18:50 +1100

alsa-driver (0.9.0rc8d-2) unstable; urgency=low

  * The "Brown paper bag" release.
  * Steve Kowalik:
    - Have alsa-source's config assume defaults if the config file doesn't
      exist, and not spew messages into debconf. (Closes: #184388)
    - Update French translation. (Closes: #184381) (thanks, Denis Barbier)
  * David B. Harris:
    - alsa-base.init: Do not remove the /dev/snd symlink on shutdown
      (Closes: #184309)
    - alsa-base.init: Clarify initscript message with respect to the magic tag
      in /etc/alsa/modutils/0.9 (Closes: #182758)
    - alsa-source.rules: Loosen compiler check regexp to catch 'gcc --version'
      differences between locales (Closes: #183922)

 -- Steve Kowalik <stevenk@debian.org>  Wed, 12 Mar 2003 17:24:39 +1100

alsa-driver (0.9.0rc8d-1) unstable; urgency=low

  * New upstream release.
    - Fixes the build failure due to perverted CVS stuff.
      (Closes: #183927, #184249)
    - Fixes the audio quality on VIA8233A chipsets. (Closes: #180653)
    - Maestro3 + IrDA should be fine on Dell laptops now. (Closes: #123800)
    - Emu10k1 sequencers shouldn't throw back ENOMEM now. (Closes: #183315)
  * Steve Kowalik:
    - Add in the 2 new cards:
      + ice1724: PCI: ICEnsemble ICE1724 / VIA VT1724 (Envy24HT)
      + vx222: PCI: Digigram VX222 V2/Mic
    - Remove the errornous card:
      + vxp-lib: The configure script doesn't recognise this as a valid card
        anyway, so there is no point keeping it in the list.
    - Patch #5: Removed, usb/usbaudio.c builds fine by itself now.
    - Patch #8: Removed, its been handled by upstream.
    - Patch #9: Removed, this has been fixed by upstream. (Closes: #183591)
    - Patch #98: New, sort of. This is the last little bit of patch #4, which
      now applies Debian-specific changes to alsaconf.
    - Fix up the descriptions for cs42{3{2,6},81}. (Closes: #183885)
      (thanks, Paul Hampson)
    - Rewrite alsa-source's config in Perl. Allows us to set the alsa cards
      without much pain. (Closes: #183887)
    - Run 'alsactl store' before #DEBHELPER# in alsa-base's postinst.
      (Closes: #184079)
    - Reorder when we run kill $procs_using_sound. (Closes: #184269)

 -- Steve Kowalik <stevenk@debian.org>  Tue, 11 Mar 2003 21:32:24 +1100

alsa-driver (0.9.0rc7-7) unstable; urgency=low

  * Steve Kowalik:
    - Brown paper bag release.
    - It's gcc272, not gcc-272. Really closes #183684. 

 -- Steve Kowalik <stevenk@debian.org>  Fri,  7 Mar 2003 23:52:44 +1100

alsa-driver (0.9.0rc7-6) unstable; urgency=low

  * Steve Kowalik:
    - Fix alsa-source rules to not set -j.  (Closes: #183693, #183565)
    - If we get back 'gcc-2.7', set 'gcc-272' instead. (Closes: #183684)

 -- Steve Kowalik <stevenk@debian.org>  Fri,  7 Mar 2003 10:29:17 +1100

alsa-driver (0.9.0rc7-5) unstable; urgency=low

  * Steve Kowalik:
    - Add David B. Harris <david@eelf.ddts.net> to Uploaders.
    - Remove Martin Loschwitz from Uploaders.
    - Build-Depend on dpatch, and just include it's make-snippet.
    - Patch #5: Rename it, so that it's less than a mouthful.
    - Alsa-source building:
      + Add $CONCURRENCY_LEVEL support to alsa-source's debian/rules.
      + Rewrite the echo-vars target.
      + Append $KDREV onto the package version. (Closes: #182147)
      + Fix some old cruft in alsa-modules.postrm.
      + Apply patch from Paul Hampson to stop building of synth modules.
        (Closes: #180234)
      + Recommend kernel-pcmcia-modules | pcmcia-modules in the control file.
      + Fix the bug in alsa-source where you needed to run make twice.
      + Set the maintainer of the built modules to just the Psychos.
      + Whoops. Didn't migrate alsa-source to the debconf changes for -4.
        (Closes: #182845)
      + Use bzip2 instead of gzip. (Closes: #183146)
    - Init script issues:
      + Deal with ALSA being compiled in statically. (Closes: #182200)
      + Use '[:space:]' rather than (\t| ). \t actually looks for 't'.
        (Closes: #182601)
      + Change the pattern thrown to the first grep when we look for processes
        using sound devices. (Closes: #182712)
  * David B. Harris:
    - debian/alsa-base.templates: Tweak alsa-base/card_list text to be a
      bit more explicit about what it's doing, and correct various grammar
      mistakes.
    - debian/alsa-base.postinst: Add aliases for sound-slot-*, since this
      is what the kernel looks for.
    - debian/alsa-source.README.Debian: Completely rewrite the document, to
      clarify and update the installation procedure. (Closes: #182315)
    - debian/alsa-source.rules: Place built .deb's into $(CURDIR)/.., or
      $(KSRC)/.., depending if we're being built underneath make-kpkg or not.
  * Jordi Mallach:
    - debian/alsaconf.8: rewrite manpage, as the old one was utterly fucked.
      While at it, fix a pair of typos (closes: #136436, #176148).
    - debian/alsaconf.manpages: add alsaconf.8.
    - debian/po/ca.po: yet another Catalan update.

 -- Steve Kowalik <stevenk@debian.org>  Tue,  4 Mar 2003 09:01:49 +1100

alsa-driver (0.9.0rc7-4) unstable; urgency=low

  * Steve Kowalik:
    - Drop alsaconf from optional to extra.
    - Clean up some parts of the init script.
      + Stops init script dying during an upgrade. (Closes: #168043)
    - Put the description for each card in the question proper. Now it's
      debconf's problem to display it readably. (Closes: #181602)
    - Stop installing {build,patch}-stamp into the alsa-driver tarball.
    - Rewrite part of the alsa-base debconf to only write the modutils file
      if it finds the string "### DEBCONF MAGIC" in the current file.
      (Closes: #181570, #181635)
    - Check that $counter is greater than zero before writing the snd-slot
      part of the modutils file. (Closes: #181727)
    - Drop every other module selected to build if all is also selected.
      (Closes: #181641)
    - Patch #7: Removed; serves no useful purpose.
    - Patch #8: Added; removes the definitions and calls to v{un,}map.
      (Closes: #180889)
    - Change the wording regarding KVERS in alsa-source's README.Debian.
      (Closes: #181644)
    - Change the Description for alsa-{base,headers,source} to be 'ALSA sound
      driver' rather than 'ALSA driver'. (Closes: #181775)
    - Fix up usage of $CC in alsa-source's rules file. (Closes: #181737)
      (thanks, Gergely Nagy)
    - Stop copying the configuration from 0.5 direct to 0.9. (Closes: #180414)
    - Use the dynamic duo of find and stat instead of ls in the init script.
      (Closes: #181628) (thanks, David Harris)
  * Jordi Mallach:
    - debian/po/ca.po: updated Catalan translation.
    - Change the wording on the alsactl store question. (closes: #181580)
    - Patch #4: set the right permissions and ownership of audio devices
      (closes: #181904).

 -- Steve Kowalik <stevenk@debian.org>  Sun, 23 Feb 2003 01:43:54 +1100

alsa-driver (0.9.0rc7-3) unstable; urgency=low

  * Steve Kowalik:
    - Rewrite the init script. (Closes: #162365)
    - Use awk, rather than tr and cut. Bah. (Closes: #172733)
    - Partially rewrite /etc/apm/event.d/alsa, too.
    - Implement Thomas Hood's suggestion for
      force_stop_modules_before_suspend. (Closes: #84736)
    - Add a Debconf frontend for module configuration.
      (Closes: #141694, #168243, #172620, #168884)
    - Note the card list is now a piece of unreadable garbage. Alternatives
      will be forth-coming.
    - Get alsa-source to drop .deb's in ../.. again. (Closes: #180261)
    - Deal with /etc/alsa not existing or being a file in the alsa-source
      postinst. (Closes: #180233, #180491)
    - Fix up some of the permission code in the alsa-base postinst to look
      more sane.
    - Also look for /dev/.devfsd before running snddevices. (Closes: #180464)
    - In alsa-source's rules file, apply a one line patch from Martin Blix
      Grydeland, and allow $CC to be overridden. (Closes: #180724)
    - Make running 'alsactl store' on shutdown configurable. (Closes: #97514)
    - Stop installing /etc/alsa/alsa-base.conf, as we deal with it in debconf.
    - Depend on >= 0.9.0rc7-3 with the generated alsa-modules.
    - Remove alsa-base's preinst. It doesn't really serve a useful purpose.
    - Stop pulling example files from /usr/share/doc.
    - Use invoke-rc.d. (thanks, Tollef Fog Heen)
    - Add etc/alsa to debian/alsa-source.dirs. (Closes: #180412)
  * Jordi Mallach:
    - debian/control:
      + create a new binary package "alsaconf". Inherit Conflicts and
        Depends from the old alsaconfig source package (closes: #179219).
      + remove obsolete Suggests on alsaconf-0.4.
    - debian/modules-0.9.conf: fix typos.
    - The new alsaconf should work ok with new ALSA 0.9.0 (closes: #98821,
      #139805, #142238, #160574, #82961, #95446, #104337, #129238, #135064,
      #137118, #169180). If you prove me wrong, please reopen.
    - The symlink creation in alsa-base makes modutils stuff work ok
      (closes: #96427, #146301).
    - It apparently can now deal with more than one card (closes: #65859).
    - alsaconf now runs update-modules after writing the configuration
      (closes: #133523).
    - alsa-utils-0.5 is deprecated and unmaintained (closes: #100360).
    - debian/alsaconf.menu: add menu item.
    - debian/rules: install utils/alsaconf into the alsaconf package.
    - patch #4:
      + use /bin/bash as interpreter for alsaconf, not just /bin/sh, plus fix
        a few bashisms (not all).
      + fix two gawkisms (thanks Clint Adams).
      + adapt script for Debian needs: write config into
        /etc/alsa/modutils/0.9, use /etc/init.d/alsa, etc.
    - debian/alsa-source.rules: reintroduce $(ROOT_CMD) fix from #161913.
    - debian/po/fr.po: French update from Denis Barbier (closes: #180504).
    - debian/po/ca.po: Updated Catalan translation.
    - debian/po/ru.po: Russian update from Serge Winitzki (closes: #180729).
    - debian/{program-wrapper,snd-dev-utils}: removed, not used anymore.

 -- Steve Kowalik <stevenk@debian.org>  Wed, 19 Feb 2003 00:09:18 +1100

alsa-driver (0.9.0rc7-2) unstable; urgency=low

  * Steve Kowalik:
    - Change author for patch #99.
    - Apply Russel Coker's patch against snd-dev-utils. (Closes: #147937)
    - Add patch #6, which doesn't build ISA modules if CONFIG_ISA is n.
      (Closes: #179522)
    - Add patch #7, which adds 2 printk's for snd-intel8x0.
    - Add an option for all cards to the alsa-source question about which
      modules to build. (Closes: #164893)
    - Add a case statement to the alsa-source postinst so that it acts like
      a Real Life Postinst.
    - Sort the sound card list in /etc/alsa/modutils/0.9. (Closes: #177623)
    - Get alsa-source to drop the .deb in the parent directory.
      (Closes: #179801)
    - Grab what C compiler was used for the kernel compile from the headers.
      (thanks, Herbert Xu and Angus Lees) (Closes: #177955, #179798)
    - Remove debian/modules-0.5.conf. Like it's used for anything, anyway.

 -- Steve Kowalik <stevenk@debian.org>  Fri,  7 Feb 2003 22:04:07 +1100

alsa-driver (0.9.0rc7-1) unstable; urgency=low

  * Steve Kowalik:
    - New upstream version.
      + Fixes oops when playback stops in fm801 cards. (Closes: #174908)
    - Add target dependancies for alsa-source's rules file.
    - Change Maintainer to 'Debian-Alsa Psychos
      <debian-alsa@lists.wedontsleep.org>'
    - If /dev/{audio,dsp,amixer} don't exist as char special, run snddevices
      in the alsa-base postinst. (Closes: #113060, #136244)
    - Update the Brazilian Portuguese translation. (thanks, Andre Luis Lopes)
      (Closes: #106941)
    - Remove the spurios 'exit 1' in the init script.
      (Closes: #137993, #170589, #172165, #172733)
    - Add patch #5, from ALSA CVS HEAD, which fixes a build failure in
      usb/usbaudio.c.
  * Jordi Mallach:
    - TODO.Debian: moved...
    - debian/TODO.Debian: ... here. Sorry StevenK :)
    - debian/TODO: remove old crap.

 -- Steve Kowalik <stevenk@debian.org>  Mon,  3 Feb 2003 00:48:47 +1100

alsa-driver (0.9.0rc6+2-3) unstable; urgency=low

  * Jordi Mallach:
    - debian/alsa-source.templates: fix typo in templates list
      (closes: #177350).
    - debian/po/ca.po: update Catalan translation.
    - debian/po/fr.po: update French translation from Denis Barbier
      (closes: #98326).
  * Steve Kowalik:
    - Fix /bin/sed usage in postinst. (Closes: #177491)
    - Move alsa-source's config file in the config script. (Closes: #177492)
    - The two above also fix this issue. (Closes: #106854)
    - The generated files are long gone. (Closes: #168299)
    - Apply patch for whitespace in /etc/alsa/modutils files.
      (Closes: #175289, #120270)
    - /sbin/mknod -> /bin/mknod in the alsa-base postrm. (Closes: #178309)
    - No more debian/debconf stuff in packaging. (Closes: #129212)
    - binary-modules is a target dependant on binary_modules.
      (Closes: #133326)
    - I bet this problem in the config script is long fixed. (Closes: #95660)
    - Create /var/lib/alsa-base/modules for the package alsa-source builds.
    - No response from the submitter, and I haven't seen anyone complain
      about the permissions of sound devices changing since. (Closes: #162934)

 -- Steve Kowalik <stevenk@debian.org>  Wed, 29 Jan 2003 01:29:10 +1100

alsa-driver (0.9.0rc6+2-2) unstable; urgency=low

  * Steve Kowalik:
    - Remove debian/alsa-base.conffiles. Debhelper handles it for us.
    - Alsa-source:
      + Copy example alsa-source.conf if it doesn't exist, and then do
        debconf-isation of the file.
      + Create /var/lib/alsa-base/modules during alsa-modules build.
      + Closes: #176945

 -- Steve Kowalik <stevenk@debian.org>  Sat, 18 Jan 2003 01:15:22 +1100

alsa-driver (0.9.0rc6+2-1) unstable; urgency=low

  * Steve Kowalik:
    - ARGH! I've been building this thing as a native package. Fix up that 
      mess.
    - Whoops. Looks like I somehow lost debian/header-files. Recreate it, under
      a better name. (thanks, Vichaya Sidhipong)

 -- Steve Kowalik <stevenk@debian.org>  Wed, 15 Jan 2003 18:54:44 +1100

alsa-driver (0.9.0rc6+1-2) unstable; urgency=low

  * Steve Kowalik:
    - Fix erroneous spaces around a = in a variable declaration in the
      alsa-modules.postinst. (Closes: #176663)

 -- Steve Kowalik <stevenk@debian.org>  Wed, 15 Jan 2003 03:13:52 +1100

alsa-driver (0.9.0rc6+1-1) unstable; urgency=low

  * Steve Kowalik:
    - Packaging:
      + Drop dbs like a stone, and use dpatch.
      + Bump version so that the orig tarball is regenerated.
      + Also correct grammar in the descriptions in debian/control.
      + Add a patch that removes the calls to depmod in the Makefile.
    - Alsa-base:
      + Correct some grammar and spelling in TODO and the example
        alsa-base.conf.
      + Remove /etc/asound.conf in the postinst (Closes: #149703)
      + Create a symlink for /dev/sndstat. Also remake /dev/sndstat as a char
        special in the postrm. (Closes: #162368) (thanks, Peter Cordes)
      + Clean up the messes that are known as the config and postinst scripts
        for alsa-base and alsa-source.
      + Clean up the init script a little bit.
      + Drop most of the autogenerated stuff. Icky.
        - Only debian/{control,post{inst,rm}} files are autogenerated now.
    - Alsa-Source:
      + Rewrite most, if not all of the handling scripts for alsa-source.
      + Set KSRC to either $KSRC or /usr/src/linux in alsa-source's rules
        file. (Closes: #166006)
      + Do the same for KVERS, between $KVERS, or unknown.
      + With this new system, if you don't specify $KVERS, stuff will break.
         Which makes it hard to install modules in to wrong location.
         (Closes: #118297)
      + Set the permissions of directories in /usr/src/modules to root.src
        drwxrwsr-x. (Closes: #174925)
  * Jordi Mallach:
    - Switch all the templates to po-debconf.
    - debian/control: Build-Depend on po-debconf.
    - debian/po/ca.po: add Catalan translation of Debconf templates.
    - debian/alsa-source.templates: update list of drivers.

 -- Steve Kowalik <stevenk@debian.org>  Tue, 14 Jan 2003 00:30:56 +1100

alsa-driver (0.9.0rc6-3) unstable; urgency=low

  * debian/modules.d/control.normal: fix the apmd suggestion here.
  * debian/devfs.conf:
    + revert the changes in rc6-1 (closes: #172583).
    + remove the PERMISSIONS entry for ^sound/.*.
    + remove all the mixer device creation stuff, which should be created by
      the module. If it's not happening, please file a new bug. Initial tests
      seemed to work well (closes: #147365, #157144, #169580).

 -- Jordi Mallach <jordi@debian.org>  Wed, 11 Dec 2002 17:35:19 +0100

alsa-driver (0.9.0rc6-2) unstable; urgency=low

  * debian/modules-tools.d/rules: fix 2.4.19 detection... would fail for
    images other than -386.

 -- Jordi Mallach <jordi@debian.org>  Tue, 10 Dec 2002 20:35:44 +0100

alsa-driver (0.9.0rc6-1) unstable; urgency=low

  * New upstream release.
  * If you reported a bug against alsa, please test if its working with this
    new version, and give us feedback, either positive or negative. Thanks!
  * debian/scripts/vars: bump TAR_DIR to 0.9.0rc6.
  * debian/modules.d/control.module{,-image}.in: adjust depends for rc6.
  * debian/control: suggest apmd, not apm (closes: #168171).
  * debian/copyright: update package history.
  * debian/init: make it ignore modules called "off" or "null". Patch from
    Michal Cihar <cihar@email.cz>, thanks! (closes: #168842).
  * debian/modules.d/control.module.2.4.19.in: make a copy of the normal
    file, but add conflicts on kernel-image-2.4.19 (<< 2.4.19-3).
  * debian/modules-tools.d/rules: if KVERS = 2.4.19, use the special
    control.module file. Wanted a hack, StevenK? There it is. :)
    (it should really be using debian/modules-tools.d/control.module-image.in,
    but that's another story^Wbug).
  * debian/devfs.conf: devfs fixes from Steven Kowalik in our unreleased
    alsa-driver repackaging (closes: #157144, #147365, #147835).

 -- Jordi Mallach <jordi@debian.org>  Tue, 10 Dec 2002 18:19:24 +0100

alsa-driver (0.9.0rc5-4) unstable; urgency=low

  * debian/patches/004_usb_api_2_4_20: really removed... duh.

 -- Jordi Mallach <jordi@debian.org>  Tue, 10 Dec 2002 12:25:48 +0100

alsa-driver (0.9.0rc5-3) unstable; urgency=medium

  * debian/patches/004_usb_api_2_4_20: removed (closes: #171136).
  * debian/debconf/Makefile.in: don't use --drop-old-templates with
    debconf-mergetemplates. Makes it work with Woody's debconf and didn't
    give us much gain anyway, in the current state of templates
    (closes: #170952).
  * debian/modules.d/control*: lax kernel-image dependencies to just the
    kernel version.

 -- Jordi Mallach <jordi@debian.org>  Tue, 10 Dec 2002 11:38:22 +0100

alsa-driver (0.9.0rc5-2) unstable; urgency=low

  * debian/apm: delete calls to the removed permission mangling functions
    which were removed in the previous upload. Thanks, Chung-chieh Shan
    (closes: #167990).
  * debian/init: remove cruft comments about the permission stuff.
  * debian/{alsa-base.conffiles,source_VERSION_.conffiles.in: removed,
    managed by debhelper.
  * debian/rules: don't remove alsa-source.conffiles.

 -- Jordi Mallach <jordi@debian.org>  Wed,  6 Nov 2002 23:40:49 +0100

alsa-driver (0.9.0rc5-1) unstable; urgency=low

  * debian/modules.d/control.source: set
    Martin Loschwitz <madkiss@madkiss.org> as Maintainer:, add
    Steve Kowalik <stevenk@debian.org> and myself as Uploaders:.
  * debian/modules.d/control.normal: Suggest: apm (>= 3.0.2-1), as promised in
    the 0.9.0rc3-0.2 changelog.
  * debian/modules.d/*: change "linux" -> "Linux" (closes: #141600).
  * Disable the whole permissions on device files in the init script.
    UGLY. Oh, and Closes: #159093. If this breaks, please reopen. (Steve)
  * Maintainer Upload, acknowledging previous NMU's
    (closes: #114598, #165889, #97640, #117981, #126211, #141372, #142691
     closes: #143377, #144696, #145382, #147383, #148191, #152430, #158515
     closes: #160514, #160778, #160788, #161188, #162378, #163403, #163498
     closes: #164801, #167633, #167854, #52564, #54131, #85242, #92871, #95920
     closes: #97727, #100630, #104163, #113717, #113996, #115757, #117054
     closes: #119195, #124176, #124288, #135535, #138322, #141154, #147362
     closes: #147720, #148900, #151502, #159394, #159660, #161913, #163343
     closes: #167461, #100023, #121355, #147013, #49299, #83509, #92640
     closes: #94564, #146013, #160857). Yay!

 -- Jordi Mallach <jordi@debian.org>  Tue, 05 Nov 2002 17:15:30 +0100

alsa-driver (0.9.0rc5-0.3) unstable; urgency=low

  * Non-Maintainer Upload, again. And it's not a drug, promise!
  * debian/debconf/Makefile.in: yuck, don't redirect debconf-mergetemplate's
    output to the same file from which we're reading. We should ship non-zero
    long templates now :) (closes: #167854).

 -- Jordi Mallach <jordi@debian.org>  Tue,  5 Nov 2002 12:50:49 +0100

alsa-driver (0.9.0rc5-0.2) unstable; urgency=low

  * Non-Maintainer Upload.
  * The "Even if it sucks, I enjoyed nursing ALSA" release.
  * debian/alsa-source.templates.{de,ja,ru}: removed, they are generated
    in debian/debconf/.
  * debconf/Makefile.in: call debconf-mergetemplates with --drop-old-templates.
  * debian/debconf/cards: remove usb-midi, it has been merged with usb-audio.
  * debian/modules-0.9.conf: kernel module symbol names changed in rc4
    (they removed the snd_ prefix), and I forgot to change it on our
    options (closes: #167461).
  * debian/patches/006_usbaudio_missing_declaration: patch from Aaron M. Ucko,
    adds a missing declaration which fixes compilation on 2.2 kernels. Good
    timing Aaron, I was about to upload :) Thanks! (closes: #167633).

 -- Jordi Mallach <jordi@debian.org>  Mon, 04 Nov 2002 02:29:30 +0100

alsa-driver (0.9.0rc5-0.1) unstable; urgency=low

  * Non-Maintainer Upload (still?).
  * New upstream release.
  * debian/alsa-source_VERSION_.README.debian.in: actually modify this file,
    not the generated one (really closes: #163343).
  * debian/debconf/Makefile.in: rework the makefile to handle split templates.
  * debian/debconf/cards: replace via686 and via8833 with via88xx.
  * debian/debconf/templates_VERSION_.templ.in: split into
    templates_VERSION_.templ.{de,ja,ru}.in. Some are outdated.
    This whole debian/debconf thing is an evil, big hack...
  * debian/scripts/vars: bump TAR_DIR to 0.9.0rc5.
  * debian/modules.d/control.module{,-image}.in: adjust depends for rc5.
  * debian/patches/001_remove_isapnp_h: removed.
  * debian/patches/005_ac97_patch_c_define_no_version: removed.
  * debian/rules: remove isapnp.h workarounds from rc3.
  * debian/sys-build.mk: source.clean wasn't removing $(STAMP_DIR) properly.
    Scary change, because I still don't get much of what goes on in DBS.
  * Powerpc driver compiles ok in this new version (closes: #165889).
  * emu10k1 build fixed (closes: #147720).
  * via686 doesn't do noise instead of sound now (closes: #163498).

 -- Jordi Mallach <jordi@debian.org>  Wed, 30 Oct 2002 14:31:44 +0100

alsa-driver (0.9.0rc3-0.3) unstable; urgency=low

  * The "I hate this package" release.
  * debian/modules-tools.d/rules: add support for kernel-package's
    --rootcmd. Thanks to Adrian 'Dagurashibanipal' von Bidder for pointing
    me at Brian May's pcmcia-source patch (closes: #161913).
  * debian/rules: remove include/linux/isapnp.h from the current directory,
    not just from the build dir. It wasn't fixed for the alsa-source
    tar.gz... (thanks, Daniel Müller; closes: #164801, really).
  * debian/patches/002_linux_2_2_0_compile_fix: sigh. Looks like this patch
    is obsolete. *Should* fix compiles on 2.2.20. No, I have not tested. I
    can't download 6 different kernels every time I work on this (thanks,
    Shinichi Sakata; closes: #115757, #162378).
  * debian/init: restore the "enable_sound_devs" call. It was fscking device
    perms for many people (thanks, Daniel Burrows; reopens: #141546).
  * debian/alsa-source.README.debian: add a few extra notes for people
    building module .debs without kernel-package (thanks, Dave Barr;
    closes: #163343).
  * Looks like not everything was broken. Submitter says this is *still*
    working with rc3. We'll see in rc4... (closes: #52564).
  * People, really. The state of this package is still deplorable. We need
    some help with devfs bugs and with alsa-base's init script in general.
    We also need to report all our bugs to ALSA upstreams... I still haven't
    found time to tag them apropiately even, much less to write a list of
    problems to their mailing list. If you think you can help, please contact
    me. I'm willing to continue doing Non-Maintainer ALSA work, but not alone.

 -- Jord
Results 1 - 1 of 1
Help - FTP Sites List - Software Dir.
Search over 15 billion files
© 1997-2017 FileWatcher.com