Filewatcher File Search File Search
Catalog
Content Search
» » » » alsa-utils_1.0.23.orig.tar.bz2 » Content »
pkg://alsa-utils_1.0.23.orig.tar.bz2:1076937/alsa-utils-1.0.23/seq/aconnect/  info  downloads

README.aconnect

================================================================
	aconnect - control subscriptions
		ver.0.1.3
	Copyright (C) 1999-2000 Takashi Iwai
================================================================

aconnect is a utility to control subscriptions of two ports as the
third "manager" client.

For example, the following connects two ports, from 64:0 to 65:0.

	% aconnect 64:0 65:0

To disconnect the existing subscription, use -d option.

	% aconnect -d 64:0 65:0

To see which port is available as input port, run the following
command:

	% aconnect -i
	client 0: 'System' [type=kernel]
	    0 'Timer           '
	    1 'Announce        '
	client 64: '0: MIDI Synth' [type=kernel]
	    0 'card 0: synth-midi: 0'

Similary, to see the output ports, use -o flag.

	% aconnect -o
	client 64: '0: MIDI Synth' [type=kernel]
	    0 'card 0: synth-midi: 0'
	client 65: 'AWE Wave Table Synth : 0' [type=kernel]
	    0 'Emu8000 port 0  '
	    1 'Emu8000 port 1  '
	    2 'Emu8000 port 2  '
	    3 'Emu8000 port 3  '

The option -l together with -i or -o shows subscribers for each port.

Ports are connected exclusively when the option -e is specified.

For modifying time-stamp with a queue, use -r or -t option followed by
a queue index which updates the time-stamp.  Former uses real-time queue,
while the latter uses tick queue.  The queue must be used (not necessarily
owned) by the receiver client.
Results 1 - 1 of 1
Help - FTP Sites List - Software Dir.
Search over 15 billion files
© 1997-2017 FileWatcher.com