Filewatcher File Search File Search
Catalog
Content Search
» » » » » amtterm_1.3-1_armel.deb » Content »
pkg://amtterm_1.3-1_armel.deb:19238/usr/share/man/man1/  info  control  downloads

amtterm - Serial-over-lan (sol) client for Intel AMT, console version…  more info»

amttool.1.gz

amttool(1)                                                amttool(1)



NAME
       amttool - remotely control Intel AMT managed machines.

SYNOPSIS
       amttool host [ command ] [ arg(s) ]

DESCRIPTION
       amttool  is a perl script which speaks SOAP to Intel AMT man‐
       aged machines.  It can query informations about  the  machine
       in question and also send some commands for basic remote con‐
       trol.

       host is the hostname or IP address  of  the  machine  amttool
       should control.  command is an optional command.

       You  must set fill AMT_PASSWORD environment variable with the
       AMT password.

       For more inforamtions on Intel AMT check amt-howto(7).

COMMANDS
       info   gather information (default).

       reset [ special ]
              reset machine, with optional special command (see sec‐
              tion below).

       powerup [ special ]
              turn on machine.

       powerdown
              turn off machine.

       powercycle [ special ]
              powercycle machine.

       netinfo
              print network configuration (requires AMT 2.5+).

       netconf if link [ ip mask gw [ dns1 [ dns2 ]]]
              configure  network  interface (requires AMT 2.5+).  if
              is the interface handle, link the link policy.  If  in
              doubt  just  feed  in what the netinfo command prints.
              ip is the IPv4  address,  mask  the  netmask,  gw  the
              default  gateway,  dns1  and dns2 are the DNS Servers.
              If no IP configuration is specified the tool tries  to
              configure  the machine in shared mac address mode with
              dhcp, otherwise in  separate  mac  address  mode  with
              static  IP  address.   Default for dns1 is the gateway
              address, for dns2 it is 0.0.0.0.

SPECIAL COMMANDS
       Special commands  can  optionally  be  specified  for  reset,
       powerup  and powercycle.  They change the default boot behav‐
       ior of the machine.

       bios   Asks for the BIOS boot messages  being  redirected  to
              serial-over-lan.

       pxe    Network boot via PXE.

       hd     Boot from local disk.

       hdsafe Boot from local disk (safe mode).

       cd     Boot from CD/DVD.

       diag   Boot in diagnostics mode.

ENVIRONMENT
       AMT_PASSWORD
              AMT password.

       AMT_DEBUG
              Enable debug output.

SEE ALSO
       amtterm(1), gamt(1), amt-howto(7)

AUTHOR
       (c) 2007 Gerd Hoffmann <kraxel@redhat.com>



                      (c) 2007,08 Gerd Hoffmann           amttool(1)
Results 1 - 1 of 1
Help - FTP Sites List - Software Dir.
Search over 15 billion files
© 1997-2017 FileWatcher.com