Filewatcher File Search File Search
Catalog
Content Search
» » » » » » conky-std_1.8.0-1+squeeze1_i386.deb » Content »
pkg://conky-std_1.8.0-1+squeeze1_i386.deb:275058/usr/share/doc/conky-std/  info  control  downloads

conky-std - highly configurable system monitor (default version)…  more info»

README.gz

conky(1)                                                              conky(1)



NAME
       conky - A system monitor for X originally based on the torsmo code, but
       more kickass. It just keeps on given'er. Yeah.

SYNOPSIS
       conky [ options ]

DESCRIPTION
       Conky is a system monitor for X originally based on torsmo.  Since  its
       inception,  Conky has changed significantly from its predecessor, while
       maintaining simplicity and  configurability.  Conky  can  display  just
       about  anything,  either on your root desktop or in its own window. Not
       only does Conky have many built-in objects, it can  also  display  just
       about any piece of information by using scripts and other external pro-
       grams.

       Conky has more than 250 built  in  objects,  including  support  for  a
       plethora  of OS stats (uname, uptime, CPU usage, mem usage, disk usage,
       "top" like process stats, and network monitoring, just to name a  few),
       built in IMAP and POP3 support, built in support for many popular music
       players (MPD, XMMS2, BMPx, Audacious), and much much more.   Conky  can
       display  this  info  either  as text, or using simple progress bars and
       graph widgets, with different fonts and colours.

       We are always looking for help, whether  its  reporting  bugs,  writing
       patches,  or  writing docs. Please use the facilities at SourceForge to
       make bug reports, feature requests, and  submit  patches,  or  stop  by
       #conky on irc.freenode.net if you have questions or want to contribute.

       Thanks for your interest in Conky.

COMPILING
       For  users compiling from source on a binary distro, make sure you have
       the X development libraries installed  (Unless  you  provide  configure
       with  "--disable-x11").  This  should  be  a package along the lines of
       "libx11-dev" or "xorg-x11-dev" for X11 libs, and similar "-dev"  format
       for  the other libs required (depending on your configure options). You
       should be able to see which extra packages you need to install by read-
       ing  errors  that  you  get  from './configure'. You can enable/disable
       stuff by giving options to configure, but be  careful  with  disabling.
       For  example:  with --disable-math you won't get errors but logarithmic
       graphs will be normal graphs and gauges will miss their line.

       Conky has (for some time) been available in the  repositories  of  most
       popular  distributions.  Here  are some installation instructions for a
       few:

       Gentoo users -- Conky is in Gentoo's  Portage...   simply  use  "emerge
       app-admin/conky" for installation.

       Debian,  etc. users -- Conky should be in your repositories, and can be
       installed by doing "aptitude install conky".

       Example to compile and run Conky with  all  optional  components  (note
       that some configure options may differ for your system):

       sh autogen.sh # Only required if building from the git repo

       ./configure       --prefix=/usr      --mandir=/usr/share/man      --in-
       fodir=/usr/share/info --datadir=/usr/share  --sysconfdir=/etc  --local-
       statedir=/var/lib --disable-own-window --enable-audacious[=yes|no|lega-
       cy] --enable-bmpx --disable-hddtemp --disable-mpd --enable-xmms2 --dis-
       able-portmon   --disable-network  --enable-debug  --disable-x11  --dis-
       able-double-buffer --disable-xdamage --disable-xft

       make

       make install # Optional

       src/conky

       Conky has been tested to be compatible with C99 C, however it  has  not
       been tested with anything other than gcc, and is not guaranteed to work
       with other compilers.

YOU SHOULD KNOW
       Conky is generally very good on resources. That said, the more you  try
       to make Conky do, the more resources it is going to consume.

       An easy way to force Conky to reload your ~/.conkyrc: "killall -SIGUSR1
       conky". Saves you the trouble of having to kill and then  restart.  You
       can now also do the same with SIGHUP.

OPTIONS
       Command  line  options override configurations defined in configuration
       file.

       -v | -V | --version
              Prints version and exits


       -q | --quiet
              Run Conky in 'quiet mode' (ie. no output)


       -D | --debug
              Increase debugging output, ie. -DD for more debugging


       -a | --alignment= ALIGNMENT
              Text alignment on  screen,  {top,bottom,middle}_{left,right,mid-
              dle}  or none. Can also be abbreviated with first chars of posi-
              tion, ie. tr for top_right.


       -b | --double-buffer
              Use double buffering (eliminates "flicker")


       -c | --config= FILE
              Config file to load instead of $HOME/.conkyrc


       -C | --print-config
              Print builtin default config to stdout. See also the section EX-
              AMPLES for more information.


       -d | --daemonize
              Daemonize Conky, aka fork to background


       -f | --font= FONT
              Font to use


       -h | --help
              Prints command line help and exits


       -o | --own-window
              Create own window to draw


       -t | --text= TEXT
              Text to render, remember single quotes, like -t ' $uptime '


       -p | --pause= SECONDS
              Time to pause before actually starting Conky


       -u | --interval= SECONDS
              Update interval


       -w | --window-id= WIN_ID
              Window id to draw


       -X | --display= DISPLAY
              X11 display to use


       -x X_COORDINATE
              X position


       -y Y_COORDINATE
              Y position


       -i COUNT
              Number of times to update Conky (and quit)


CONFIGURATION SETTINGS
       Default    configuration    file    location   is   $HOME/.conkyrc   or
       ${sysconfdir}/conky/conky.conf. On most systems,  sysconfdir  is  /etc,
       and you can find the sample config file there (/etc/conky/conky.conf).

       You  might  want  to copy it to $HOME/.conkyrc and then start modifying
       it. Other configs can be found at http://conky.sf.net/

       TEXT   After this begins text to be formatted on screen.  Backslash (\)
              escapes  newlines  in  the  text section. This can be useful for
              cleaning up config files where conky is used to  pipe  input  to
              dzen2.


       alignment
              Aligned position on screen, may be top_left, top_right, top_mid-
              dle, bottom_left, bottom_right, bottom_middle, middle_left, mid-
              dle_middle, middle_right, or none (also can be abreviated as tl,
              tr, tm, bl, br, bm, ml, mm, mr). See also gap_x and gap_y.


       append_file
              Append the file given as argument.


       background
              Boolean value, if true, Conky will be forked to background  when
              started.


       border_inner_margin
              Inner border margin in pixels (the margin between the border and
              text).


       border_outer_margin
              Outer border margin in pixels (the margin between the border and
              the edge of the window).


       border_width
              Border width in pixels.


       colorN Predefine a color for use inside TEXT segments.  Substitute N by
              a digit between 0 and 9, inclusively. When specifying the  color
              value in hex, omit the leading hash (#).


       cpu_avg_samples
              The number of samples to average for CPU monitoring.


       default_bar_size
              Specify  a  default  width  and  height for bars.  Example: 'de-
              fault_bar_size 0 6'. This is particularly useful for execbar and
              execibar as they do not take size arguments.


       default_color
              Default color and border color


       default_gauge_size
              Specify  a  default  width and height for gauges.  Example: 'de-
              fault_gauge_size 25 25'. This is particularly useful  for  exec-
              gauge and execigauge as they do not take size arguments


       default_graph_size
              Specify  a  default  width and height for graphs.  Example: 'de-
              fault_graph_size 0 25'. This is particularly  useful  for  exec-
              graph and execigraph as they do not take size arguments


       default_outline_color
              Default outline color


       default_shade_color
              Default shading color and border's shading color


       disable_auto_reload
              Enable to disable the inotify-based auto config reload feature.


       diskio_avg_samples
              The number of samples to average for disk I/O monitoring.


       display
              Specify an X display to connect to.


       double_buffer
              Use the Xdbe extension? (eliminates flicker) It is highly recom-
              mended to use own window with this one so double buffer won't be
              so big.


       draw_borders
              Draw borders around text?


       draw_graph_borders
              Draw borders around graphs?


       draw_outline
              Draw outlines?


       draw_shades
              Draw shades?


       extra_newline
              Put  an  extra newline at the end when writing to stdout, useful
              for writing to awesome's wiboxes.


       font   Font name in X, xfontsel can be used to get a nice font


       format_human_readable
              If enabled, values which are in bytes will be printed  in  human
              readable  format  (i.e., KiB, MiB, etc). If disabled, the number
              of bytes is printed instead.


       gap_x  Gap, in pixels, between right or left border of screen, same  as
              passing  -x  at command line, e.g. gap_x 10.  For other position
              related stuff, see 'alignment'.


       gap_y  Gap, in pixels, between top or bottom border of screen, same  as
              passing  -y  at command line, e.g. gap_y 10.  For other position
              related stuff, see 'alignment'.


       hddtemp_host
              Hostname  to  connect  to  for  hddtemp  objects.  Defaults   to
              "127.0.0.1".


       hddtemp_port
              Port to use for hddtemp connections. Defaults to 7634.


       if_up_strictness
              How  strict  should if_up be when testing an interface for being
              up? The value is one of up, link or address, to  check  for  the
              interface being solely up, being up and having link or being up,
              having link and an assigned IP address.


       imap   Default global IMAP server. Arguments are: "host user  pass  [-i
              interval  (in  seconds)]  [-f 'folder'] [-p port] [-e 'command']
              [-r retries]". Default port is 143, default folder  is  'INBOX',
              default interval is 5 minutes, and default number of retries be-
              fore giving up is 5. If the password is  supplied  as  '*',  you
              will be prompted to enter the password when Conky starts.


       imlib_cache_flush_interval
              Interval (in seconds) to flush Imlib2 cache.


       imlib_cache_size
              Imlib2  image  cache  size, in bytes. Defaults to 4MiB. Increase
              this value if you use $image lots. Set to 0 to disable the image
              cache.


       lua_draw_hook_post function_name [function arguments]
              This  function, if defined, will be called by Conky through each
              iteration after drawing to the window. Requires X support. Takes
              any  number  of  optional  arguments.  Use this hook for drawing
              things on top of what Conky draws. Conky puts 'conky_' in  front
              of  function_name to prevent accidental calls to the wrong func-
              tion unless you place 'conky_' in front of it yourself.


       lua_draw_hook_pre function_name [function arguments]
              This function, if defined, will be called by Conky through  each
              iteration  before  drawing  to  the  window. Requires X support.
              Takes any number of optional arguments. Use this hook for  draw-
              ing  things  on  top of what Conky draws. Conky puts 'conky_' in
              front of function_name to prevent accidental calls to the  wrong
              function unless you place 'conky_' in front of it yourself.


       lua_load
              Loads the Lua scripts separated by spaces.


       lua_shutdown_hook function_name [function arguments]
              This  function,  if defined, will be called by Conky at shutdown
              or when the configuration is reloaded. Use this hook to clean up
              after  yourself, such as freeing memory which has been allocated
              by external libraries via Lua. Conky puts 'conky_' in  front  of
              function_name  to prevent accidental calls to the wrong function
              unless you place 'conky_' in front of it yourself.


       lua_startup_hook function_name [function arguments]
              This function, if defined, will be called by Conky at startup or
              when the configuration is reloaded.  Use this hook to initialize
              values, or for any run-once applications. Conky puts 'conky_' in
              front  of function_name to prevent accidental calls to the wrong
              function unless you place 'conky_' in front of it yourself.


       mail_spool
              Mail spool for mail checking


       max_port_monitor_connections
              Allow each port monitor to track at most this  many  connections
              (if 0 or not set, default is 256)


       max_specials
              Maximum  number  of special things, e.g. fonts, offsets, aligns,
              etc. (default is 512)


       max_text_width width
              When a line in the output contains 'width'  chars  and  the  end
              isn't  reached,  the  next char will start on a new line. If you
              want to make sure that lines don't get broken, set 'width' to 0


       max_user_text bytes
              Maximum size of user text buffer, i.e. layout below TEXT line in
              config file (default is 16384 bytes)


       maximum_width pixels
              Maximum width of window


       minimum_size width (height)
              Minimum size of window


       mpd_host
              Host of MPD server


       mpd_password
              MPD server password


       mpd_port
              Port of MPD server


       music_player_interval
              Music  player thread update interval (defaults to Conky's update
              interval)


       net_avg_samples
              The number of samples to average for net data


       no_buffers
              Subtract (file system) buffers from used memory?


       out_to_console
              Print text to stdout.


       out_to_ncurses
              Print text in the console, but use ncurses  so  that  conky  can
              print the text of a new update over the old text. (In the future
              this will provide more useful things)


       out_to_stderr
              Print text to stderr.


       out_to_x
              When set to no, there will be no output in X  (useful  when  you
              also  use things like out_to_console). If you set it to no, make
              sure that it's placed before all other X-related  setting  (take
              the  first line of your configfile to be sure). Default value is
              yes


       override_utf8_locale
              Force UTF8? requires XFT


       overwrite_file
              Overwrite the file given as argument.


       own_window
              Boolean, create own window to draw?


       own_window_class
              Manually set the WM_CLASS name. Defaults to "Conky".


       own_window_colour colour
              If own_window_transparent no, set a specified background  colour
              (defaults to black). Takes either a hex value (e.g. ffffff, note
              the lack of '#') or a valid RGB name (see /usr/lib/X11/rgb.txt)


       own_window_hints undecorated,below,above,sticky,skip_taskbar,skip_pager
              If own_window is yes, you may use these window manager hints  to
              affect  the way Conky displays. Notes: Use own_window_type desk-
              top as another way to implement many of these hints  implicitly.
              If  you  use own_window_type override, window manager hints have
              no meaning and are ignored.


       own_window_title
              Manually set the window name. Defaults to "<hostname> - conky".


       own_window_argb_visual
              Boolean, use ARGB visual? ARGB can be used for real  transparen-
              cy,  note  that  a composite manager is required for real trans-
              parency. This option will not work as desired (in most cases) in
              conjunction with 'own_window_type override'.


       own_window_argb_value
              When ARGB visuals are enabled, this use this to modify the alpha
              value used. Valid range is 0-255, where 0 is 0% opacity, and 255
              is 100% opacity. Note that if own_window_transparent is enabled,
              this value has no effect.


       own_window_transparent
              Boolean, set transparency? If ARGB visual is enabled, sets back-
              ground opacity to 0%.


       own_window_type
              if  own_window  is  yes,  you  may specify type normal, desktop,
              dock, panel or override (default: normal).  Desktop windows  are
              special windows that have no window decorations; are always vis-
              ible on your desktop; do not appear in your  pager  or  taskbar;
              and  are  sticky  across  all  workspaces. Panel windows reserve
              space along a desktop edge, just like panels and taskbars,  pre-
              venting  maximized  windows  from  overlapping them. The edge is
              chosen based on the alignment option. Override windows  are  not
              under the control of the window manager. Hints are ignored. This
              type of window can be useful for certain situations.


       pad_percents
              Pad percentages to this many decimals (0 = no padding)


       pop3   Default global POP3 server. Arguments are: "host user  pass  [-i
              interval  (in  seconds)] [-p port] [-e 'command'] [-r retries]".
              Default port is 110, default interval is 5 minutes, and  default
              number of retries before giving up is 5. If the password is sup-
              plied as '*', you will be prompted to enter  the  password  when
              Conky starts.


       short_units
              Shortens units to a single character (kiB->k, GiB->G, etc.). De-
              fault is off.


       show_graph_range
              Shows the time range covered by a graph.


       show_graph_scale
              Shows the maximum value in scaled graphs.


       stippled_borders
              Border stippling (dashing) in pixels


       temperature_unit
              Desired output unit of all objects displaying a temperature. Pa-
              rameters  are either "fahrenheit" or "celsius". The default unit
              is degree Celsius.


       templateN
              Define a template for later use inside TEXT segments. Substitute
              N  by  a  digit  between  0 and 9, inclusively. The value of the
              variable is being inserted into the stuff below TEXT at the cor-
              responding position, but before some substitutions are applied:

              '\n' -> newline
              '\\' -> backslash
              '\ ' -> space
              '\N' -> template argument N


       text_buffer_size bytes
              Size  of  the  standard text buffer (default is 256 bytes). This
              buffer is used for intermediary text, such as individual  lines,
              output  from $exec vars, and various other variables. Increasing
              the size of this buffer can drastically reduce  Conky's  perfor-
              mance,  but  will  allow for more text display per variable. The
              size of this buffer cannot be smaller than the default value  of
              256 bytes.


       times_in_seconds
              If true, variables that output times output a number that repre-
              sents seconds. This doesn't affect $time, $tztime and $utime


       top_cpu_separate
              If true, cpu in top will show usage of one processor's power. If
              false,  cpu  in top will show the usage of all processors' power
              combined.


       top_name_width
              Width for $top name value (defaults to 15 characters).


       total_run_times
              Total number of times for Conky to update before quitting.  Zero
              makes Conky run forever


       update_interval seconds
              Update interval


       update_interval_on_battery seconds
              Update interval when running on batterypower


       uppercase
              Boolean value, if true, text is rendered in upper case


       use_spacer
              Adds spaces around certain objects to stop them from moving oth-
              er things around. Arguments are left, right, and none (default).
              The   old  true/false  values  are  deprecated  and  default  to
              right/none respectively. Note that this only helps  if  you  are
              using a mono font, such as Bitstream Vera Sans Mono.


       use_xft
              Use Xft (anti-aliased font and stuff)


       xftalpha
              Alpha of Xft font. Must be a value at or between 1 and 0.


       xftfont
              Xft font to use.


OBJECTS/VARIABLES
       Colours  are parsed using XParsecolor(), there might be a list of them:
       /usr/share/X11/rgb.txt.  Colour can be also in #rrggbb format (hex).

       Some objects may create threads, and sometimes these threads  will  not
       be  destroyed  until  Conky  terminates.  There is no way to destroy or
       clean up threads while Conky is running. For example, if you use an MPD
       variable,  the  MPD  thread  will  keep  running until Conky dies. Some
       threaded objects will use one of the parameters as a 'key', so that you
       only  have  1 relevant thread running (for example, the $curl, $rss and
       $weather objects launch one thread per URI).

       acpiacadapter (adapter)
              ACPI ac adapter state. On linux, the  adapter  option  specifies
              the  subfolder  of  /sys/class/power_supply containing the state
              information (defaults to "AC"). Other systems ignore it.


       acpifan
              ACPI fan state


       acpitemp
              ACPI temperature in C.


       addr (interface)
              IP address for an interface, or "No Address" if  no  address  is
              assigned.


       addrs (interface)
              IP  addresses for an interface (if one - works like addr). Linux
              only.


       adt746xcpu
              CPU temperature from therm_adt746x


       adt746xfan
              Fan speed from therm_adt746x


       alignc (num)
              Align text to centre


       alignr (num)
              Right-justify text, with space of N


       apcupsd host port
              Sets up the connection to apcupsd daemon.  Prints  nothing,  de-
              faults to localhost:3551


       apcupsd_cable
              Prints the UPS connection type.


       apcupsd_charge
              Current battery capacity in percent.


       apcupsd_lastxfer
              Reason for last transfer from line to battery.


       apcupsd_linev
              Nominal input voltage.


       apcupsd_load
              Current load in percent.


       apcupsd_loadbar
              Bar showing current load.


       apcupsd_loadgauge (height),(width)
              Gauge that shows current load.


       apcupsd_loadgraph (height),(width) (gradient colour 1) (gradient colour
       2) (scale) (-t) (-l)
              History graph of current load.


       apcupsd_model
              Prints the model of the UPS.


       apcupsd_name
              Prints the UPS user-defined name.


       apcupsd_status
              Prints current status (on-line, on-battery).


       apcupsd_temp
              Current internal temperature.


       apcupsd_timeleft
              Time left to run on battery.


       apcupsd_upsmode
              Prints the UPS mode (e.g. standalone).


       apm_adapter
              Display APM AC adapter status (FreeBSD only)


       apm_battery_life
              Display APM battery life in percent (FreeBSD only)


       apm_battery_time
              Display remaining APM battery life in hh:mm:ss or  "unknown"  if
              AC adapterstatus is on-line or charging (FreeBSD only)


       audacious_bar (height),(width)
              Progress bar


       audacious_bitrate
              Bitrate of current tune


       audacious_channels
              Number of audio channels of current tune


       audacious_filename
              Full path and filename of current tune


       audacious_frequency
              Sampling frequency of current tune


       audacious_length
              Total length of current tune as MM:SS


       audacious_length_seconds
              Total length of current tune in seconds


       audacious_main_volume
              The current volume fetched from Audacious


       audacious_playlist_length
              Number of tunes in playlist


       audacious_playlist_position
              Playlist position of current tune


       audacious_position
              Position of current tune (MM:SS)


       audacious_position_seconds
              Position of current tune in seconds


       audacious_status
              Player status (Playing/Paused/Stopped/Not running)


       audacious_title (max length)
              Title of current tune with optional maximum length specifier


       battery (num)
              Battery  status and remaining percentage capacity of ACPI or APM
              battery. ACPI battery number can be given as  argument  (default
              is BAT0).


       battery_bar (height),(width) (num)
              Battery percentage remaining of ACPI battery in a bar. ACPI bat-
              tery number can be given as argument (default is BAT0).


       battery_percent (num)
              Battery percentage remaining for  ACPI  battery.   ACPI  battery
              number can be given as argument (default is BAT0).


       battery_short (num)
              Battery  status and remaining percentage capacity of ACPI or APM
              battery. ACPI battery number can be given as  argument  (default
              is  BAT0).  This mode display a short status, which means that C
              is displayed instead of charging, D for discharging, F for full,
              N for not present, E for empty and U for unknown.


       battery_time (num)
              Battery  charge/discharge  time  remaining of ACPI battery. ACPI
              battery number can be given as argument (default is BAT0).


       blink text_and_other_conky_vars
              Let 'text_and_other_conky_vars' blink on and off.


       bmpx_album
              Album in current BMPx track


       bmpx_artist
              Artist in current BMPx track


       bmpx_bitrate
              Bitrate of the current BMPx track


       bmpx_title
              Title of the current BMPx track


       bmpx_track
              Track number of the current BMPx track


       bmpx_uri
              URI of the current BMPx track


       buffers
              Amount of memory buffered


       cached Amount of memory cached


       cmdline_to_pid string
              PID of the first process that has string in it's commandline


       color (color)
              Change drawing color to 'color' which is a name of a color or  a
              hexcode  preceded  with  #  (for  example #0A1B2C ).  If you use
              ncurses only the following colors are supported:  red,green,yel-
              low,blue,magenta,cyan,black,white.


       colorN Change  drawing color to colorN configuration option, where N is
              a digit between 0 and 9, inclusively.


       combine var1 var2
              Places the lines of var2 to the right of the lines of var1 sepa-
              rated by the chars that are put between var1 and var2. For exam-
              ple: ${combine ${head /proc/cpuinfo 2}  -  ${head  /proc/meminfo
              1}}  gives  as  output "cpuinfo_line1 - meminfo_line1" on line 1
              and "cpuinfo_line2 -" on line 2. $combine vars can also be nest-
              ed to place more vars next to each other.


       conky_build_arch
              CPU architecture Conky was built for


       conky_build_date
              Date Conky was built


       conky_version
              Conky version


       cpu (cpuN)
              CPU  usage  in percents. For SMP machines, the CPU number can be
              provided as an argument. ${cpu cpu0} is  the  total  usage,  and
              ${cpu cpuX} (X >= 1) are individual CPUs.


       cpubar (cpuN) (height),(width)
              Bar  that shows CPU usage, height is bar's height in pixels. See
              $cpu for more info on SMP.


       cpugauge (cpuN) (height),(width)
              Elliptical gauge that shows CPU  usage,  height  and  width  are
              gauge's  vertical and horizontal axis respectively. See $cpu for
              more info on SMP.


       cpugraph (cpuN) (height),(width) (gradient colour 1)  (gradient  colour
       2) (scale) (-t) (-l)
              CPU  usage graph, with optional colours in hex, minus the #. See
              $cpu for more info on SMP. Uses  a  logarithmic  scale  (to  see
              small numbers) when you use the -l switch. Takes the switch '-t'
              to use a temperature gradient, which makes the  gradient  values
              change  depending  on  the amplitude of a particular graph value
              (try it and see).


       curl url (interval_in_minutes)
              Download data from URI using Curl at the specified interval. The
              interval may be a floating point value greater than 0, otherwise
              defaults to 15 minutes. Most useful  when  used  in  conjunction
              with  Lua  and  the Lua API. This object is threaded, and once a
              thread is created it can't be explicitly destroyed.  One  thread
              will  run  for each URI specified. You can use any protocol that
              Curl supports.

       desktop
              Number of the desktop on which conky is running or  the  message
              "Not running in X" if this is the case.


       desktop_name
              Name  of  the  desktop  on which conky is running or the message
              "Not running in X" if this is the case.


       desktop_number
              Number of desktops or the message "Not running in X" if this  is
              the case.


       disk_protect device
              Disk  protection  status,  if  supported  (needs  kernel-patch).
              Prints either "frozen" or "free " (note the padding).


       diskio (device)
              Displays current disk IO. Device is optional, and takes the form
              of sda for /dev/sda. Individual partitions are allowed.


       diskio_read (device)
              Displays current disk IO for reads. Device as in diskio.


       diskio_write (device)
              Displays current disk IO for writes. Device as in diskio.


       diskiograph  (device)  (height),(width)  (gradient  colour 1) (gradient
       colour 2) (scale) (-t) (-l)
              Disk IO graph, colours defined in hex, minus the #. If scale  is
              non-zero, it becomes the scale for the graph. Uses a logarithmic
              scale (to see small numbers) when you use -l switch.  Takes  the
              switch  '-t' to use a temperature gradient, which makes the gra-
              dient values change depending on the amplitude of  a  particular
              graph value (try it and see).


       diskiograph_read  (device) (height),(width) (gradient colour 1) (gradi-
       ent colour 2) (scale) (-t) (-l)
              Disk IO graph for reads, colours defined in hex, minus the #. If
              scale is non-zero, it becomes the scale for the graph. Device as
              in diskio. Uses a logarithmic scale (to see small numbers)  when
              you  use  -l  switch. Takes the switch '-t' to use a temperature
              gradient, which makes the gradient values  change  depending  on
              the amplitude of a particular graph value (try it and see).


       diskiograph_write (device) (height),(width) (gradient colour 1) (gradi-
       ent colour 2) (scale) (-t) (-l)
              Disk IO graph for writes, colours defined in hex, minus  the  #.
              If scale is non-zero, it becomes the scale for the graph. Device
              as in diskio. Uses a logarithmic scale (to  see  small  numbers)
              when  you use -l switch. Takes the switch '-t' to use a tempera-
              ture gradient, which makes the gradient values change  depending
              on the amplitude of a particular graph value (try it and see).


       downspeed (net)
              Download speed in suitable IEC units


       downspeedf (net)
              Download speed in KiB with one decimal


       downspeedgraph  (netdev) (height),(width) (gradient colour 1) (gradient
       colour 2) (scale) (-t) (-l)
              Download speed graph, colours defined in hex, minus  the  #.  If
              scale  is  non-zero,  it becomes the scale for the graph. Uses a
              logarithmic scale (to see small numbers) when you use -l switch.
              Takes the switch '-t' to use a temperature gradient, which makes
              the gradient values change depending on the amplitude of a  par-
              ticular graph value (try it and see).


       draft_mails (maildir) (interval)
              Number of mails marked as draft in the specified mailbox or mail
              spool if not. Only maildir type mailboxes  are  supported,  mbox
              type will return -1.


       else   Text to show if any of the above are not true


       endif  Ends an $if block.


       entropy_avail
              Current entropy available for crypto freaks


       entropy_bar (height),(width)
              Normalized bar of available entropy for crypto freaks


       entropy_perc
              Percentage of entropy available in comparison to the poolsize


       entropy_poolsize
              Total size of system entropy pool for crypto freaks


       eval string
              Evaluates  given string according to the rules of TEXT interpre-
              tation, i.e. parsing any contained  text  object  specifications
              into  their  output,  any occuring '$$' into a single '$' and so
              on. The output is then being parsed again.


       eve api_userid api_key character_id
              Fetches your currently training skill from the  Eve  Online  API
              servers  (http://www.eve-online.com/)  and  displays  the  skill
              along with the remaining training time.


       exec command
              Executes a shell command and displays the output in conky. warn-
              ing:  this  takes a lot more resources than other variables. I'd
              recommend coding wanted behaviour in C and posting a patch.


       execbar command
              Same as exec, except if the first value return is  a  value  be-
              tween  0-100,  it  will use that number for a bar.  The size for
              bars can be controlled via the default_bar_size config setting.


       execgauge command
              Same as exec, except if the first value returned is a value  be-
              tween  0-100,  it will use that number for a gauge. The size for
              gauges can be controlled via the default_gauge_size config  set-
              ting.


       execgraph (-t) (-l) command
              Same as execbar, but graphs values. Uses a logaritmic scale when
              the log option (-l switch) is given (to see small numbers). Val-
              ues  still have to be between 0 and 100. The size for graphs can
              be controlled via the default_graph_size config  setting.  Takes
              the  switch  '-t' to use a temperature gradient, which makes the
              gradient values change depending on the amplitude of a  particu-
              lar  graph value (try it and see). If -t or -l is your first ar-
              gument, you may need to preceed it by a space (' ').


       execi interval command
              Same as exec but with specific interval. Interval can't be  less
              than update_interval in configuration. See also $texeci


       execibar interval command
              Same as execbar, except with an interval


       execigauge interval command
              Same as execgauge, but takes an interval arg and gauges values.


       execigraph interval (-t) (-l) command
              Same  as execgraph, but takes an interval arg and graphs values.
              If -t or -l is your first argument, you may need to  preceed  it
              by a space (' ').


       execp command
              Executes a shell command and displays the output in conky. warn-
              ing: this takes a lot more resources than other  variables.  I'd
              recommend coding wanted behaviour in C and posting a patch. This
              differs from $exec in that it parses the output of the  command,
              so  you  can  insert things like ${color red}hi!${color} in your
              script and have it correctly parsed  by  Conky.  Caveats:  Conky
              parses  and  evaluates  the  output  of  $execp every time Conky
              loops, and then destroys all the objects. If you try to use any-
              thing  like $execi within an $execp statement, it will function-
              ally run at the same interval that the $execp statement runs, as
              it is created and destroyed at every interval.


       execpi interval command
              Same  as  execp  but  with specific interval.  Interval can't be
              less than update_interval in configuration. Note that the output
              from  the $execpi command is still parsed and evaluated at every
              interval.


       flagged_mails (maildir) (interval)
              Number of mails marked as flagged in the  specified  mailbox  or
              mail  spool  if  not. Only maildir type mailboxes are supported,
              mbox type will return -1.


       font (font)
              Specify a different font. This new font will apply to  the  cur-
              rent  line and everything following. You can use a $font with no
              arguments to change back to the default  font  (much  like  with
              $color)


       format_time seconds format
              Format  time  given  in  seconds.  This  var only works when the
              times_in_seconds configuration setting is on. Format is a string
              that  should  start  and  end with a "-char. The "-chars are not
              part of the output, \w,\d,\h,\m,\s,\(,\) and \\ are replaced  by
              weeks,days,hours,minutes,seconds,(,)  and  \. If you leave out a
              unit, it's value will be expressed in the  highest  unite  lower
              then the one left out. Text between ()-chars will not be visible
              if a replaced unit in this text is 0. If seconds  is  a  decimal
              number then you can see the numbers behind the point by using \S
              followed by a number that specifies the amount of digits  behind
              the  point that you want to see (maximum 9).  You can also place
              a 'x' behind \S so you have all digits behind the point  and  no
              trailing zero's. (also maximum 9)


       forwarded_mails (maildir) (interval)
              Number  of mails marked as forwarded in the specified mailbox or
              mail spool if not. Only maildir type  mailboxes  are  supported,
              mbox type will return -1.


       freq (n)
              Returns  CPU  #n's frequency in MHz. CPUs are counted from 1. If
              omitted, the parameter defaults to 1.


       freq_g (n)
              Returns CPU #n's frequency in GHz. CPUs are counted from  1.  If
              omitted, the parameter defaults to 1.


       fs_bar (height),(width) fs
              Bar  that  shows how much space is used on a file system. height
              is the height in pixels. fs is any file on that file system.


       fs_bar_free (height),(width) fs
              Bar that shows how much space is free on a file  system.  height
              is the height in pixels. fs is any file on that file system.


       fs_free (fs)
              Free space on a file system available for users.


       fs_free_perc (fs)
              Free percentage of space on a file system available for users.


       fs_size (fs)
              File system size.


       fs_type (fs)
              File system type.


       fs_used (fs)
              File system used space.


       fs_used_perc (fs)
              Percent of file system used space.


       goto x The next element will be printed at position 'x'.


       gw_iface
              Displays  the default route's interface or "multiple"/"none" ac-
              cordingly.


       gw_ip  Displays the default gateway's IP or  "multiple"/"none"  accord-
              ingly.


       hddtemp (dev)
              Displays  temperature  of a selected hard disk drive as reported
              by the hddtemp daemon.  Use  hddtemp_host  and  hddtemp_port  to
              specify  a  host and port for all hddtemp objects. If no dev pa-
              rameter is given, the first disk returned by the hddtemp  daemon
              is used.


       head logfile lines (next_check)
              Displays  first  N  lines  of  supplied  text  file. The file is
              checked every 'next_check' update. If  next_check  is  not  sup-
              plied, Conky defaults to 2. Max of 30 lines can be displayed, or
              until the text buffer is filled.


       hr (height)
              Horizontal line, height is the height in pixels


       hwmon (dev) type n (factor offset)
              Hwmon sensor from sysfs (Linux 2.6). Parameter dev may be  omit-
              ted if you have only one hwmon device.  Parameter type is either
              'in' or 'vol' meaning voltage; 'fan' meaning fan; 'temp' meaning
              temperature.   Parameter   n   is  number  of  the  sensor.  See
              /sys/class/hwmon/ on your local computer. The optional arguments
              'factor'  and  'offset'  allow  precalculation of the raw input,
              which is being modified as follows: 'input = input  *  factor  +
              offset'. Note that they have to be given as decimal values (i.e.
              contain at least one decimal place).


       i2c (dev) type n (factor offset)
              I2C sensor from sysfs (Linux 2.6). Parameter dev may be  omitted
              if  you  have only one I2C device. Parameter type is either 'in'
              or 'vol' meaning voltage; 'fan' meaning fan; 'temp' meaning tem-
              perature.   Parameter   n   is   number   of   the  sensor.  See
              /sys/bus/i2c/devices/ on your local computer. The optional argu-
              ments  'factor' and 'offset' allow precalculation of the raw in-
              put, which is being modified as follows: 'input = input * factor
              +  offset'.   Note  that they have to be given as decimal values
              (i.e.  contain at least one decimal place).


       i8k_ac_status
              If running the i8k kernel driver for Inspiron laptops,  displays
              whether  ac  power  is on, as listed in /proc/i8k (translated to
              human-readable). Beware that this is by default not  enabled  by
              i8k itself.


       i8k_bios
              If  running the i8k kernel driver for Inspiron laptops, displays
              the bios version as listed in /proc/i8k.


       i8k_buttons_status
              If running the i8k kernel driver for Inspiron laptops,  displays
              the volume buttons status as listed in /proc/i8k.


       i8k_cpu_temp
              If  running the i8k kernel driver for Inspiron laptops, displays
              the cpu temperature in Celsius, as reported by /proc/i8k.


       i8k_left_fan_rpm
              If running the i8k kernel driver for Inspiron laptops,  displays
              the  left  fan's  rate of rotation, in revolutions per minute as
              listed in /proc/i8k. Beware, some laptops i8k reports these fans
              in reverse order.


       i8k_left_fan_status
              If  running the i8k kernel driver for Inspiron laptops, displays
              the left fan status as listed in /proc/i8k (translated to human-
              readable).  Beware,  some  laptops i8k reports these fans in re-
              verse order.


       i8k_right_fan_rpm
              If running the i8k kernel driver for Inspiron laptops,  displays
              the  right  fan's rate of rotation, in revolutions per minute as
              listed in /proc/i8k. Beware, some laptops i8k reports these fans
              in reverse order.


       i8k_right_fan_status
              If  running the i8k kernel driver for Inspiron laptops, displays
              the right fan status as listed in /proc/i8k (translated  to  hu-
              man-readable).  Beware,  some  laptops i8k reports these fans in
              reverse order.


       i8k_serial
              If running the i8k kernel driver for Inspiron laptops,  displays
              your laptop serial number as listed in /proc/i8k.


       i8k_version
              If  running the i8k kernel driver for Inspiron laptops, displays
              the version formatting of /proc/i8k.


       ibm_brightness
              If running the IBM ACPI, displays the brigtness of the laptops's
              LCD (0-7).


       ibm_fan
              If running the IBM ACPI, displays the fan speed.


       ibm_temps N
              If  running the IBM ACPI, displays the temperatures from the IBM
              temperature sensors (N=0..7) Sensor 0 is on the CPU, 3 is on the
              GPU.


       ibm_volume
              If  running  the  IBM  ACPI,  displays the "master" volume, con-
              trolled by the volume keys (0-14).


       iconv_start codeset_from codeset_to
              Convert text from one codeset to another using GNU iconv.  Needs
              to be stopped with iconv_stop.


       iconv_stop
              Stop iconv codeset conversion.


       if_empty (var)
              if  conky  variable  VAR  is  empty,  display everything between
              $if_empty and the matching $endif


       if_existing file (string)
              if FILE exists, display everything between if_existing  and  the
              matching  $endif.  The optional second paramater checks for FILE
              containing the specified string and  prints  everything  between
              $if_existing and the matching $endif.


       if_gw  if there is at least one default gateway, display everything be-
              tween $if_gw and the matching $endif


       if_match expression
              Evaluates the given boolean expression, printing everything  be-
              tween $if_match and the matching $endif depending on whether the
              evaluation returns true or not.  Valid expressions consist of  a
              left  side,  an  operator and a right side. Left and right sides
              are being parsed for contained text objects  before  evaluation.
              Recognised left and right side types are:

              doubleArgument consists of only digits and a single dot.
              longArgument consists of only digits.
              stringArgument is enclosed in quotation marks (")

              Valid operands are: '>', '<', '>=', '<=', '==', '!='.


       if_mixer_mute (mixer)
              If  mixer  exists, display everything between $if_mixer_mute and
              the matching $endif. If no mixer is specified, "Master" is used.


       if_mounted (mountpoint)
              if MOUNTPOINT is mounted, display everything between $if_mounted
              and the matching $endif


       if_mpd_playing
              if   mpd  is  playing  or  paused,  display  everything  between
              $if_mpd_playing and the matching $endif


       if_running (process)
              if PROCESS is running, display everything  $if_running  and  the
              matching  $endif.  This  uses  the  ``pidof'' command, so the -x
              switch is also supported.


       if_smapi_bat_installed (INDEX)
              when using smapi, if the battery with index INDEX is  installed,
              display   everything  between  $if_smapi_bat_installed  and  the
              matching $endif


       if_up (interface)
              if INTERFACE exists and is up, display everything between $if_up
              and the matching $endif


       if_updatenr (updatenr)
              If  it's the UPDATENR-th time that conky updates, display every-
              thing between $if_updatenr and the matching $endif. The  counter
              resets when the highest UPDATENR is reached. Example : "{$if_up-
              datenr 1}foo$endif{$if_updatenr 2}bar$endif{$if_updatenr  4}$en-
              dif"  shows  foo 25% of the time followed by bar 25% of the time
              followed by nothing the other half of the time.


       if_xmms2_connected
              Display everything between $if_xmms2_connected and the  matching
              $endif if xmms2 is running.


       image <path to image> (-p x,y) (-s WxH) (-n) (-f interval)
              Renders  an  image from the path specified using Imlib2. Takes 4
              optional arguments: a position, a size, a no-cache switch, and a
              cache  flush  interval.  Changing the x,y position will move the
              position of the image, and changing the WxH will scale  the  im-
              age.  If  you specify the no-cache flag (-n), the image will not
              be cached.  Alternately, you can specify the -f  int  switch  to
              specify  a cache flust interval for a particular image. Example:
              ${image /home/brenden/cheeseburger.jpg -p 20,20 -s 200x200} will
              render  'cheeseburger.jpg'  at (20,20) scaled to 200x200 pixels.
              Conky does not make any attempt to adjust the position  (or  any
              other  formatting)  of images, they are just rendered as per the
              arguments passed. The only reason $image is  part  of  the  TEXT
              section,  is  to allow for runtime modifications, through $execp
              $lua_parse, or some other method.


       imap_messages (args)
              Displays the number of messages in your global IMAP inbox by de-
              fault.  You  can  define  individual  IMAP inboxes separately by
              passing arguments to this object.   Arguments  are:  "host  user
              pass  [-i  interval  (in  seconds)]  [-f 'folder'] [-p port] [-e
              'command'] [-r retries]". Default port is 143, default folder is
              'INBOX',  default  interval  is 5 minutes, and default number of
              retries before giving up is 5. If the password  is  supplied  as
              '*',  you  will  be  prompted  to  enter the password when Conky
              starts.


       imap_unseen (args)
              Displays the number of unseen messages in your global IMAP inbox
              by default. You can define individual IMAP inboxes separately by
              passing arguments to this object. Arguments are: "host user pass
              [-i  interval  (in  seconds)]  [-f 'folder'] [-p port] [-e 'com-
              mand'] [-r retries]".  Default port is 143,  default  folder  is
              'INBOX',  default  interval  is 5 minutes, and default number of
              retries before giving up is 5. If the password  is  supplied  as
              '*',  you  will  be  prompted  to  enter the password when Conky
              starts.


       include path
              Loads the configfile at path, places the  configsettings  behind
              the  configsettings  in  the  orginal config and places the vars
              where the includevar stood.

       ioscheduler disk
              Prints the current ioscheduler used  for  the  given  disk  name
              (i.e. e.g. "hda" or "sdb")


       kernel Kernel version


       laptop_mode
              The value of /proc/sys/vm/laptop_mode


       lines textfile
              Displays the number of lines in the given file


       loadavg (1|2|3)
              System  load  average, 1 is for past 1 minute, 2 for past 5 min-
              utes and 3 for past 15 minutes.  Without  argument,  prints  all
              three values separated by whitespace.


       loadgraph  (height),(width)  (gradient  colour  1)  (gradient colour 2)
       (scale) (-t) (-l)
              Load1 average graph, similar to xload, with optional colours  in
              hex,  minus  the  #. Uses a logarithmic scale (to see small num-
              bers) when you use the -l switch.  Takes the switch '-t' to  use
              a  temperature  gradient, which makes the gradient values change
              depending on the amplitude of a particular graph value  (try  it
              and see).


       lua function_name (function parameters)
              Executes  a  Lua function with given parameters, then prints the
              returned string. See also 'lua_load' on  how  to  load  scripts.
              Conky  puts  'conky_' in front of function_name to prevent acci-
              dental calls to the wrong function  unless  you  put  you  place
              'conky_' in front of it yourself.


       lua_bar (height, width) function_name (function parameters)
              Executes  a  Lua function with given parameters and draws a bar.
              Expects result value to be an integer between 0 and 100. See al-
              so  'lua_load'  on  how to load scripts.  Conky puts 'conky_' in
              front of function_name to prevent accidental calls to the  wrong
              function  unless you put you place 'conky_' in front of it your-
              self.


       lua_gauge (height, width) function_name (function parameters)
              Executes a Lua function with given parameters and draws a gauge.
              Expects result value to be an integer between 0 and 100. See al-
              so 'lua_load' on how to load scripts.  Conky  puts  'conky_'  in
              front  of function_name to prevent accidental calls to the wrong
              function unless you put you place 'conky_' in front of it  your-
              self.


       lua_graph  function_name (height),(width) (gradient colour 1) (gradient
       colour 2) (scale) (-t) (-l)
              Executes a Lua function with and draws a graph.  Expects  result
              value  to  be  any number, and by default will scale to show the
              full range. See also 'lua_load' on how to  load  scripts.  Takes
              the  switch  '-t' to use a temperature gradient, which makes the
              gradient values change depending on the amplitude of a  particu-
              lar  graph  value (try it and see). Conky puts 'conky_' in front
              of function_name to prevent accidental calls to the wrong  func-
              tion unless you put you place 'conky_' in front of it yourself.


       lua_parse function_name (function parameters)
              Executes  a Lua function with given parameters as per $lua, then
              parses and prints the result value as per the syntax for Conky's
              TEXT  section. See also 'lua_load' on how to load scripts. Conky
              puts 'conky_' in front of function_name  to  prevent  accidental
              calls to the wrong function unless you put you place 'conky_' in
              front of it yourself.


       machine
              Machine, i686 for example


       mails (mailbox) (interval)
              Mail count in the specified mailbox or your mail spool  if  not.
              Both  mbox and maildir type mailboxes are supported. You can use
              a program like fetchmail to get mails  from  some  server  using
              your favourite protocol. See also new_mails.


       mboxscan (-n number of messages to print) (-fw from width) (-sw subject
       width) mbox
              Print a summary of recent messages in an  mbox  format  mailbox.
              mbox  parameter  is the filename of the mailbox (can be encapsu-
              lated using '"', ie. ${mboxscan -n 10 "/home/brenden/some box"}


       mem    Amount of memory in use


       membar (height),(width)
              Bar that shows amount of memory in use


       memeasyfree
              Amount of free memory including the memory that is  very  easily
              freed (buffers/cache)


       memfree
              Amount of free memory


       memgauge (height),(width)
              Gauge that shows amount of memory in use (see cpugauge)


       memgraph  (height),(width)  (gradient  colour  1)  (gradient  colour 2)
       (scale) (-t) (-l)
              Memory usage graph. Uses a logarithmic scale (to see small  num-
              bers) when you use the -l switch. Takes the switch '-t' to use a
              temperature gradient, which makes the gradient values change de-
              pending on the amplitude of a particular graph value (try it and
              see).


       memmax Total amount of memory


       memperc
              Percentage of memory in use


       mixer (device)
              Prints the mixer value as reported by the OS.  Default mixer  is
              "Master",  but  you can specify one of the available ALSA Simple
              mixer controls.  You can find the list  of  those  available  on
              your system using amixer.


       mixerbar (device)
              Displays  mixer  value  in a bar as reported by the OS. See docs
              for $mixer for details on arguments.


       mixerl (device)
              Prints the left channel mixer value as reported by the  OS.  See
              docs for $mixer for details on arguments.


       mixerlbar (device)
              Displays  the  left  channel mixer value in a bar as reported by
              the OS. See docs for $mixer for details on arguments.


       mixerr (device)
              Prints the right channel mixer value as reported by the OS.  See
              docs for $mixer for details on arguments.


       mixerrbar (device)
              Displays  the  right channel mixer value in a bar as reported by
              the OS. See docs for $mixer for details on arguments.


       moc_album
              Album of the current MOC song


       moc_artist
              Artist of the current MOC song


       moc_bitrate
              Bitrate in the current MOC song


       moc_curtime
              Current time of the current MOC song


       moc_file
              File name of the current MOC song


       moc_rate
              Rate of the current MOC song


       moc_song
              The current song name being played in MOC.


       moc_state
              Current state of MOC; playing, stopped etc.


       moc_timeleft
              Time left in the current MOC song


       moc_title
              Title of the current MOC song


       moc_totaltime
              Total length of the current MOC song


       monitor
              Number of the monitor on which conky is running or  the  message
              "Not running in X" if this is the case.


       monitor_number
              Number  of monitors or the message "Not running in X" if this is
              the case.


       mpd_album
              Album in current MPD song


       mpd_artist
              Artist in current MPD song must be enabled at compile


       mpd_bar (height),(width)
              Bar of mpd's progress


       mpd_bitrate
              Bitrate of current song


       mpd_elapsed
              Song's elapsed time


       mpd_file
              Prints the file name of the current MPD song


       mpd_length
              Song's length


       mpd_name
              Prints the MPD name field


       mpd_percent
              Percent of song's progress


       mpd_random
              Random status (On/Off)


       mpd_repeat
              Repeat status (On/Off)


       mpd_smart (max length)
              Prints the song name in either the form "artist - title" or file
              name, depending on whats available


       mpd_status
              Playing, stopped, et cetera.


       mpd_title (max length)
              Title of current MPD song


       mpd_track
              Prints the MPD track field


       mpd_vol
              MPD's volume


       nameserver (index)
              Print  a  nameserver  from /etc/resolv.conf. Index starts at and
              defaults to 0.


       new_mails (mailbox) (interval)
              Unread mail count in the specified mailbox or mail spool if not.
              Both mbox and maildir type mailboxes are supported.


       nodename
              Hostname


       nvidia threshold temp ambient gpufreq memfreq imagequality
              Nvidia  graficcard  support for the XNVCtrl library. Each option
              can be shortened to the least significant part. Temperatures are
              printed as float, all other values as integer.

              threshold The thresholdtemperature at which the gpu slows down
              temp Gives the gpu current temperature
              ambient Gives current air temperature near GPU case
              gpufreq Gives the current gpu frequency
              memfreq Gives the current mem frequency
              imagequality  Which  imagequality should be chosen by OpenGL ap-
              plications


       offset (pixels)
              Move text over by N pixels. See also $voffset.


       outlinecolor (color)
              Change outline color


       pb_battery item
              If running on Apple powerbook/ibook, display information on bat-
              tery  status.  The item parameter specifies, what information to
              display. Exactly one item must be specified. Valid items are:

              status Display if battery is fully charged, charging,  discharg-
              ing or absent (running on AC)
              percent  Display  charge  of  battery in percent, if charging or
              discharging. Nothing will be  displayed,  if  battery  is  fully
              charged or absent.
              time  Display the time remaining until the battery will be fully
              charged or discharged at current rate. Nothing is displayed,  if
              battery  is  absent or if it's present but fully charged and not
              discharging.


       pid_chroot pid
              Directory used as rootdirectory by the process (this will be "/"
              unless the process did a chroot syscall)


       pid_cmdline pid
              Command line this process was invoked with


       pid_cwd pid
              Current working directory of the process


       pid_environ pid varname
              Contents of a environment-var of the process


       pid_environ_list pid
              List of environment-vars that the process can see


       pid_exe pid
              Path to executed command that started the process


       pid_nice pid
              The nice value of the process


       pid_openfiles pid
              List of files that the process has open


       pid_parent pid
              The pid of the parent of the process


       pid_priority pid
              The priority of the process (see 'priority' in "man 5 proc")


       pid_read pid
              Total number of bytes read by the process


       pid_state pid
              State of the process


       pid_state_short pid
              One  of  the  chars  in  "RSDZTW"  representing the state of the
              process where R is running, S is sleeping  in  an  interruptible
              wait, D is waiting in uninterruptible disk sleep, Z is zombie, T
              is traced or stopped (on a signal), and W is paging


       pid_stderr pid
              Filedescriptor binded to the STDERR of the process


       pid_stdin pid
              Filede
Results 1 - 1 of 1
Help - FTP Sites List - Software Dir.
Search over 15 billion files
© 1997-2017 FileWatcher.com