Filewatcher File Search File Search
Content Search
» » » » » gxemul_0.4.7.2-1_i386.deb » Content »
pkg://gxemul_0.4.7.2-1_i386.deb:916734/usr/share/doc/gxemul/  info  control  downloads

gxemul - machine emulator for multiple architectures…  more info»


            Gavare's eXperimental Emulator   --   GXemul

Copyright (C) 2003-2009  Anders Gavare

Overview  --  What is GXemul?

GXemul is a framework for full-system computer architecture emulation.
Several processor architectures and machine types have been implemented.
It is working well enough to allow unmodified "guest" operating systems to
run inside the emulator, as if they were running on real hardware.

The emulator emulates (networks of) real machines. The machines may consist
of ARM, MIPS, Motorola 88K, PowerPC, and SuperH processors, and various
surrounding hardware components such as framebuffers, busses, interrupt
controllers, ethernet controllers, disk controllers, and serial port

GXemul, including the dynamic translation system, is implemented in portable
C, which means that the emulator will run on practically any modern host

The documentation lists the machines and guest operating systems that can
be regarded as "working" in GXemul. The best working guest operating
systems are probably NetBSD/pmax and NetBSD/cats.

Possible uses of GXemul include:

 o)  running guest operating systems in a "sandboxed" environment

 o)  compiling your source code inside a guest operating system which you
     otherwise would not have access to (e.g. various exotic ports of
     NetBSD or OpenBSD), to make sure that your source code is portable to
     those platforms

 o)  educational purposes, e.g. to learn how to write code for MIPS

 o)  hobby operating system development; the emulator can be used as a
     complement to testing your code on real hardware

 o)  simulating (ethernet) networks of computers running various
     operating systems, to study their interaction with each other

 o)  debugging code in general

Use your imagination :-)

GXemul's limitations

 o)  GXemul is not a cycle-accurate simulator, because it does not simulate
     things smaller than an instruction. Pipe-line stalls, instruction latency
     effects etc. are more or less completely ignored.

 o)  Hardware devices have been implemented in an ad-hoc and as-needed manner,
     usually only enough to fool certain guest operating systems, e.g. NetBSD,
     that the hardware devices exist and function well enough for those guest
     operating systems to use them.

     (A consequence of this is that a machine mode may be implemented well
     enough to run NetBSD for that machine mode, but other guest operating
     systems may not run at all, or behave strangely.)

Quick start

To compile, type './configure' and then 'make'. This should work on most
Unix-like systems. If it does not, then please mail me a bug report.

You might want to experiment with various CC and CFLAGS environment
variable settings, to get optimum performance. The dynamic translation core
in GXemul is written in C, not assembly language, and its performance
therefore depends on the compiler used to compile GXemul.

If you are impatient, and want to try out running a guest operating system 
inside GXemul, read this:  doc/guestoses.html#netbsdpmaxinstall

If you want to use GXemul for experimenting with code of your own,
then I suggest you compile a Hello World program according to the tips
listed here:  doc/experiments.html#hello

Please read the rest of the documentation in the doc/ sub-directory for
more detailed information on how to use the emulator.


If you have found GXemul useful in some way, or feel like sending me
comments or feedback in general, then mail me at anders(at)

Results 1 - 1 of 1
Help - FTP Sites List - Software Dir.
Search over 15 billion files
© 1997-2017