howto-html-en-10.1-4mdv2008.1.noarch.rpm/usr/share/doc/HOWTO/HTML/en/Multi-Disk/Multi-Disk-HOWTO-27.html

pkg://howto-html-en-10.1-4mdv2008.1.noarch.rpm:16697283/usr/share/doc/HOWTO/HTML/en/Multi-Disk/Multi-Disk-HOWTO-27.html info downloads

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
 <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9">
 <TITLE>HOWTO: Multi Disk System Tuning: Appendix G: Example: Partition Placement</TITLE>
 <LINK HREF="Multi-Disk-HOWTO-28.html" REL=next>
 <LINK HREF="Multi-Disk-HOWTO-26.html" REL=previous>
 <LINK HREF="Multi-Disk-HOWTO.html#toc27" REL=contents>
</HEAD>
<BODY>
<A HREF="Multi-Disk-HOWTO-28.html">Next</A>
<A HREF="Multi-Disk-HOWTO-26.html">Previous</A>
<A HREF="Multi-Disk-HOWTO.html#toc27">Contents</A>
<HR>
<H2><A NAME="s27">27. Appendix G: Example: Partition Placement</A></H2>

<P>
<!--
disk!example!partition placement
-->

This is just to sort the partition numbers in ascending order ready
to input to fdisk or cfdisk. Remember to optimize for physical track
positioning (not done here).
<P>
<BLOCKQUOTE><CODE>
<PRE>
        Drive :   sda     sdb     sdc

Total capacity: |   600 |  1000 |  1300 |

Partition

1               |   100 |   436 |   710 |
2               :   100 :    64 :    64 :
3               |   400 |   300 |   300 |
4               :       :   200 :   226 :
</PRE>
</CODE></BLOCKQUOTE>
<P>
<HR>
<A HREF="Multi-Disk-HOWTO-28.html">Next</A>
<A HREF="Multi-Disk-HOWTO-26.html">Previous</A>
<A HREF="Multi-Disk-HOWTO.html#toc27">Contents</A>
</BODY>
</HTML>