howtoenh-2004.10.4-1.noarch.rpm/usr/share/doc/howto/en/html/Hebrew-HOWTO-7.html

pkg://howtoenh-2004.10.4-1.noarch.rpm:15461409/usr/share/doc/howto/en/html/Hebrew-HOWTO-7.html info downloads

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
 <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9">
 <TITLE>The Hebrew HOWTO: Printer setup</TITLE>
 <LINK HREF="Hebrew-HOWTO-8.html" REL=next>
 <LINK HREF="Hebrew-HOWTO-6.html" REL=previous>
 <LINK HREF="Hebrew-HOWTO.html#toc7" REL=contents>
</HEAD>
<BODY>
<A HREF="Hebrew-HOWTO-8.html">Next</A>
<A HREF="Hebrew-HOWTO-6.html">Previous</A>
<A HREF="Hebrew-HOWTO.html#toc7">Contents</A>
<HR>
<H2><A NAME="s7">7. Printer setup</A></H2>

<P>Mainly there is not to say, if you have a regular ASCII line printer
(who does, these days?) there is a good chance that there are Hebrew fonts
in it on the <CODE>EPROM</CODE> chip.
<P>If you use PostScript, you should download soft fonts to the printer (you
can always use the 
<A HREF="Hebrew-HOWTO-4.html#heb-fonts">earlier mentioned</A> Web fonts for
that. These fonts are also useable with Ghostscript).
<P>If you have a PCL printer (LaserJet etc.), you can either use font 
cartridges or use Ghostscript.
<P>
<HR>
<A HREF="Hebrew-HOWTO-8.html">Next</A>
<A HREF="Hebrew-HOWTO-6.html">Previous</A>
<A HREF="Hebrew-HOWTO.html#toc7">Contents</A>
</BODY>
</HTML>