pkg://junkbuster-blank-2.0-1.src.rpm:198925/junkbuster-blank-config-texts-1.patch
info downloads
diff -uNr ijb20.orig/Makefile ijb20/Makefile
--- ijb20.orig/Makefile Fri Sep 12 17:00:00 1997
+++ ijb20/Makefile Sun Nov 16 15:06:05 1997
@@ -2,8 +2,9 @@
# comment out the next line if you do NOT want to use regular expressions
REGEX = -DREGEX
+CC = gcc
-DEFAULT_CFLAGS = -I. $(REGEX) -DSTDC_HEADERS -DHAVE_STRING
+DEFAULT_CFLAGS = -I. $(REGEX) -O3 -DSTDC_HEADERS -DHAVE_STRING
PROG = junkbuster
O = o
diff -uNr ijb20.orig/README.TOO ijb20/README.TOO
--- ijb20.orig/README.TOO Wed Dec 31 19:00:00 1969
+++ ijb20/README.TOO Sun Nov 16 15:08:01 1997
@@ -0,0 +1,74 @@
+File:
+ README.TOO from junkbuster-blank-2.0-1.{i386,...}.rpm
+
+misc info for version 2.0-1:
+----------------------------
+ The files
+
+ /etc/rc.d/rc0.d/K09junkbuster
+ /etc/rc.d/rc1.d/K09junkbuster
+ /etc/rc.d/rc2.d/S84junkbuster
+ /etc/rc.d/rc3.d/S84junkbuster
+ /etc/rc.d/rc5.d/S84junkbuster
+ /etc/rc.d/rc6.d/K09junkbuster
+ /etc/rc.d/init.d/junkbuster.init
+ /etc/cookiefile
+ /etc/blocklist
+ /etc/junkbuster.aclfile
+ /etc/junkbuster.config
+ /etc/junkbuster.forward
+ /etc/junkbuster.trust
+
+ were contributed by Stefan Waldherr <swa@cs.cmu.edu> and are NOT part
+ of the standard junkbuster-distribution. Questions and comments should
+ therefor be forwarded to swa@cs.cmu.edu. Both cookiefile and blocklist
+ are somewhat tailored to my needs --- feel free to modify them.
+
+rpm changes since version 2.0-0:
+--------------------------------
+
+ o Now-less-ads-than-ever (SM)
+
+ o compiled with gcc instead of cc
+
+ o compiled with -O3, thus it should be a little faster
+
+ o show-proxy-args now works
+
+ o /etc/junkbuster.init wasn't necessary
+
+rpm changes since version 1.4:
+------------------------------
+
+ o some more config files were put into /etc
+
+ o The junkbuster-blank rpm returns a 1x1 pixel image, that gets
+ displayed by Netscape instead of the blocked image.
+
+ o Read http://mind.learning.cs.cmu.edu/junkbuster.shtml for
+ further info.
+
+rpm changes since version 1.3:
+------------------------------
+
+ o The program has been moved to /usr/sbin (from /usr/local/bin)
+
+ o Init- and stopscripts (/etc/rc.d/rc*) have been added so
+ that the junkbuster starts automatically during bootup.
+
+ o The /etc/blocklist file is much more sophisticated. Theoretically
+ one should e.g. browse all major US and German newspapers without
+ seeing one annoying ad.
+
+ o junkbuster.init was modified. It now starts junkbuster with an
+ additional "-r @" flag.
+
+For changes in the code (to version 2.0) look at the FAQ or at
+
+ http://www.junkbuster.com/ijbdist.html
+
+I you happen to see an ad which got thru the filter PLEASE drop me a mail.
+
+Have fun,
+Stefan. <swa@cs.cmu.edu>
+
diff -uNr ijb20.orig/blocklist.swa ijb20/blocklist.swa
--- ijb20.orig/blocklist.swa Wed Dec 31 19:00:00 1969
+++ ijb20/blocklist.swa Sun Nov 16 14:54:12 1997
@@ -0,0 +1,196 @@
+#
+# This is /etc/blocklist which was put here
+# by junkbuster-2.0-0.{i386|...}.rpm
+#
+# Last updated: Sat Nov 15 14:11:45 EST 1997
+# (get the latest version via the search described below)
+#
+# You have to compile junkbuster WITH regexp support to fully
+# enjoy this gizmo!! (The RedHat package is compiled with regexps)
+#
+# Comments: swa@cs.cmu.edu
+#
+# --------------------------------------------------------------------------
+#
+# Kudos to
+# NUKEM <nukem@atlas.synflux.com.au>
+#
+# --------------------------------------------------------------------------
+
+# For more detail, see http://www.junkbusters.com/ht/en/ijbfaq.html#blocking
+# More comprehensive blockfiles are available elsewhere, try searching
+# documents that mention "junkbuster" and are called "blocklist" e.g.
+# altavista.digital.com/cgi-bin/query?pg=q&what=web&fmt=.&q=%2Bjunkbuster+%2Burl%3Ablocklist
+
+# Empty lines and lines beginning with a `#' are ignored.
+# The following line should be included to block use of telnet (port 23)
+:23
+
+# --------------------------------------------------------------------------
+#
+# With no hostname, a pathname blocks regardless of the domain name:
+#
+# --------------------------------------------------------------------------
+
+#------------------------
+#
+# generic paths
+#
+#------------------------
+/*.*/(.*[-_.])?ads?[0-9]?(/|[-_.].*|.(gif|jpe?g))
+/*.*/(.*[-_.])?count(er)?(.cgi|.dll|.exe|[?/])
+/*.*/(plain|live|rotate)[-_.]?ads?/
+/*.*/(sponsor|banner)s?[0-9]?/
+/*.*/_?(plain|live)?ads?(-banners)?/
+/*.*/ad(sdna_image|gifs?)/
+/*.*/ad(server|stream|juggler).(cgi|pl|dll|exe).*
+/*.*/adstream.cgi.*
+/*.*/adv((er)?ts?|ertis(ing|ements?))?/
+/*.*/anzei(gen)?/?
+/*.*/banner_ads/
+/*.*/banners?/
+/*.*/images/addver.gif
+/*.*/place-ads
+/*.*/promobar.*
+/*.*/publicite/
+/*.*/reklame/
+/*.*/sponsor.gif
+/*.*/sponsors?[0-9]?/
+/*.*/ucbandeimg/
+/*.*/werb\..*
+/*.*/werbung/
+/ad_images/
+/bin/nph-oma.count/ct/default.shtml
+/bin/nph-oma.count/ix/default.html
+/cgi-bin/nph-load
+/netscapeworld/nw-ad/
+/worldnet/ad.cgi
+
+# ms sucks !
+/*.*/(ms)?backoff(ice)?.*.(gif|jpe?g)
+/*.*/(msie|sqlbans|powrbybo|activex|backoffice|explorer|netnow|getpoint|ntbutton|hmlink).*.(gif|jpe?g)
+/*.*/activex.*(gif|jpe?g)
+/*.*/explorer?.(gif|jpe?g)
+/*.*/freeie.(gif|jpe?g)
+/*.*/ie_?(buttonlogo|static?|anim.*)?.(gif|jpe?g)
+/*.*/ie_sm.(gif|jpe?g)
+/*.*/msie(30)?.(gif|jpe?g)
+/*.*/msnlogo.(gif|jpe?g)
+/*.*/office97_ad1.(gif|jpe?g)
+/*.*/pbbobansm.(gif|jpe?g)
+/*.*/powrbybo.(gif|jpe?g)
+/*.*/sqlbans.(gif|jpe?g)
+
+# generally useless information and promo stuff (commented out)
+#/*.*/(counter|getpcbutton|BuiltByNOF|netscape|hotmail|vcr(rated)?|rsaci(rated)?|freeloader|cache_now(_anim)?|apache_pb|now_(anim_)?button|ie_?(buttonlogo|static?|.*ani.*)?).(gif|jpe?g)
+
+#------------------------
+#
+# specific servers
+#
+#------------------------
+193.158.37.3/cgi-bin/impact
+193.210.156.114
+199.78.52.10
+204.253.46.71:1977
+204.94.67.40/wc/
+205.216.163.62
+205.217.103.58:1977
+205.217.103.58:1977
+206.50.219.33
+207.159.135.72
+207.82.250.9
+ad-up.com
+ad.doubleclick.net
+ad.infoseek.com
+ad.linkexchange.com
+ad.preferences.com
+adbot.com
+adcount.hollywood.com
+adforce.imgis.com
+adlink.deh.de
+adone.com
+ads*.focalink.com
+ads*.zdnet.com
+ads.imagine-inc.com
+ads.imdb.com
+ads.infospace.com
+ads.narrowline.com
+ads.realmedia.com
+ads.softbank.net/bin/wadredir
+ads.usatoday.com
+ads.washingtonpost.com
+ads.web21.com
+banners.internetextra.com
+bannerswap.com
+bs.gsanet.com/gsa_bs/
+ciec.org/images/countdown.gif
+click1.wisewire.com
+click2.wisewire.com
+clickii.imagine-inc.com:1964
+commonwealth.riddler.com
+customad.cnn.com
+cyberfirst1.web.cerf.net/image.ng/
+digits.com/wc/
+dino.mainz.ibm.de
+flycast.com/
+globaltrack.com
+globaltrak.net
+gm.preferences.com/image.ng
+gtp.dejanews.com/gtplacer
+hardware.pagecount.com/
+hitbox.com/wc/
+hyperbanner.net
+icount.com/.*.count
+images.yahoo.com/promotions/
+impartner.de/cgi-bin
+linktrader.com/cgi-bin/
+logiclink.nl/cgi-bin/
+movielink.com/media/imagelinks/MF.(ad|sponsor)
+nrsite.com
+nt1.imagine-inc.com
+nt2.imagine-inc.com
+nytsyn.com/gifs
+pagecount.com/aa-cgi-bin
+pagecount.com/aa-cgi-bin
+ph-ad*.focalink.com
+promo.ads.softbank.net
+resource-marketing.com/tb/
+smartclicks.com/.*/smartimg
+smh.com.au/adproof/
+sysdoc.pair.com/cgi-sys/cgiwrap/sysdoc/sponsor.gif
+victory.cnn.com/image.ng/spacedesc
+www.ads.warnerbros.com
+www.fxweb.holowww.com/.*.cgi
+www.infoworld.com/pageone/gif
+www.javaworld.com/javaworld/jw-ad
+www.link4link.com/cgi-bin
+www.mediashower.com/ad-bin/
+www.nedstat.nl/cgi-bin/
+www.nrsite.com
+www.pagecount.com/aa-cgi-bin
+www.smartclicks.com:81
+www.swwwap.com/cgi-bin/
+www.websitepromote.com/partner/img/
+www.wishing.com/webaudit
+yahoo.com/CategoryID=0
+
+#------------------------
+#
+# some images on servers that I frequently visit
+#
+#------------------------
+
+# some images on cnn's website just suck!
+/*.*/custom_feature.gif
+/*.*/explore.anim.gif
+/*.*/pathnet.warner.gif
+/*.*/images/9710/book.search.gif
+www.cnnfn.com/hotstories/companies/images/companies_banner.gif
+/markets/images/markets_banner.gif
+/*.*/infoseek.gif
+/ows-img/bnoble.gif
+/ows-img/nb_Infoseek.gif
+
+# die sueddeutsche
+/*.*/images/artszonnet.jpg
diff -uNr ijb20.orig/cookiefile.swa ijb20/cookiefile.swa
--- ijb20.orig/cookiefile.swa Wed Dec 31 19:00:00 1969
+++ ijb20/cookiefile.swa Sun Nov 16 14:54:18 1997
@@ -0,0 +1,35 @@
+#
+# This is /etc/cookiefile which was put here
+# by junkbuster-2.0-0.{i386|...}.rpm
+#
+#
+# For more detail, see http://www.junkbusters.com/ht/en/ijbfaq.html#cookies
+
+# Empty lines and lines beginning with a # is ignored.
+# To permit an entire site to set cookies, simply include its domain name:
+#really-trustyworthy-people.org
+www.nytimes.com
+cnn.com
+yahoo.com
+sun.com
+javasoft.com
+
+# You can allow cookies out, but stop them coming in:
+# >send-user-cookies.com
+
+# For more details see http://www.junkbusters.com/ht/en/ijbfaq.html#crumble
+
+# With the -r @ option the cookiefile also allows referer to be disclosed
+# selectively. The following line is for Intellicast's map server.
+# For more details see http://www.junkbusters.com/ht/en/ijbfaq.html#breakage
+# >208.194.150.32
+
+# You restrict permissions to a path as well as a domain.
+# This line fixes the problem of Wired News piling up navigation columns.
+# For more details see http://www.junkbusters.com/ht/en/ijbfaq.html#wired
+#
+# The junkbuster starts with "-r @".
+#
+>wired.com/news/
+>tvguide.com
+>yahoo.com
diff -uNr ijb20.orig/jcc.c ijb20/jcc.c
--- ijb20.orig/jcc.c Fri Sep 12 17:00:00 1997
+++ ijb20/jcc.c Sun Nov 16 14:38:22 1997
@@ -91,6 +91,16 @@
char DEFAULT_USER_AGENT[] ="User-Agent: Mozilla/3.02 (Macintosh; I; PPC)";
+
+#define USE_TINYGIF 1 /* send a tiny gif instead */
+
+char TINYGIF[] = "HTTP/1.0 200 OK\r\n"
+ "Content-type: image/gif\r\n\r\n"
+ "GIF89a\001\000\001\000\200\000\000\377\377\377\000\000"
+ "\000!\371\004\001\000\000\000\000,\000\000\000\000\001"
+ "\000\001\000\000\002\002D\001\000;";
+
+
int debug = 0;
int multi_threaded = 1;
int hideConsole = 0;
@@ -322,7 +332,14 @@
prog, http->hostport, http->path);
}
- write_socket(csp->cfd, p, strlen(p));
+#ifdef USE_TINYGIF
+ if ( strcmp( http->path, "/show-proxy-args" ) )
+ write_socket(csp->cfd, TINYGIF, sizeof(TINYGIF)-1);
+ else
+ write_socket(csp->cfd, p, strlen(p));
+#else
+ write_socket(csp->cfd, p, strlen(p));
+#endif
if(DEBUG(LOG)) fwrite(p, strlen(p), 1, logfp);
diff -uNr ijb20.orig/junkbuster.aclfile ijb20/junkbuster.aclfile
--- ijb20.orig/junkbuster.aclfile Wed Dec 31 19:00:00 1969
+++ ijb20/junkbuster.aclfile Sun Nov 16 14:16:27 1997
@@ -0,0 +1,100 @@
+# Access Control List for the Internet Junkbuster 2.0
+#
+# Copyright 1997 Junkbusters Corporation. For distribution, modification and
+# use under the GNU General Public License. These files come with NO WARRANTY.
+# See http://www.junkbusters.com/ht/en/gpl.html or the README file for details.
+#
+# Note: we provided this feature due to popular demand from ISPs,
+# please be reminded that the FAQ states that this proxy is not
+# intended to be a substitute for a firewall or to encourage anyone
+# to defer addressing basic security weaknesses.
+
+# If no access file is provided, the proxy talks to anyone that connects.
+# If an access file is provided, the proxy talks only to IP addresses
+# permitted somewhere in this file and not denied later in this file.
+#
+# Summary -- if using an ACL:
+#
+# Client must have permission to receive service
+# LAST match in ACL file wins
+# Default behavior is to deny service
+#
+# Syntax for an entry in an Access Control List is:
+#
+# ACTION SRC_ADDR[/SRC_MASKLEN] [ DST_ADDR[/DST_MASKLEN] ]
+#
+# where the fields are
+#
+# ACTION = "permit" | "deny"
+#
+# SRC_ADDR = client hostname or dotted IP address
+# SRC_MASKLEN = number of bits in the subnet mask for the source
+#
+# DST_ADDR = server or forwarder hostname or dotted IP address
+# DST_MASKLEN = number of bits in the subnet mask for the target
+#
+# field separator (FS) is whitespace (space or tab)
+#
+# IMPORTANT NOTE
+# ==============
+# If the junkbuster is using a forwarder or a gateway for a particular
+# destination URL, the DST_ADDRR that is examined is the address of
+# the forwarder or the gateway and NOT the address of the ultimate target.
+# This is necessary because it may be impossible for the local
+# junkbuster to determine the address of the ultimate target
+# (that's often what gateways are used for).
+#
+# Here are a few examples to show how the ACL works:
+
+# localhost is OK -- no DST_ADDR implies that ALL destination addresses are OK
+# permit localhost
+
+# a silly example to illustrate:
+#
+# permit any host on the class-C subnet with junkbusters to go anywhere
+#
+# permit www.junkbusters.com/24
+#
+# except deny one particular IP address from using it at all
+#
+# deny ident.junkbusters.com
+
+# another example
+#
+# you can specify an explicit network address and subnet mask
+# explict addresses do not have to be resolved to be used.
+#
+# permit 207.153.200.0/24
+
+# a subnet mask of 0 matches anything, so the next line permits everyone.
+#
+# permit 0.0.0.0/0
+
+# Note: you cannot say
+#
+# permit .org
+#
+# to allow all .org domains; every IP-address listed must resolve fully.
+
+# An ISP may want to provide a junkbuster that is accessible by "the world"
+# and yet restrict use of some of their private content to hosts on its
+# internal network (i.e. its own subscribers). Say, for instance the
+# ISP owns the Class-B IP address block 123.124.0.0 (a 16 bit netmask).
+# This is how they could do it:
+
+# permit 0.0.0.0/0 0.0.0.0/0 # other clients can go anywhere
+# with the following exceptions:
+#
+# deny 0.0.0.0/0 123.124.0.0/16 # block all external requests for
+# sites on the ISP's network
+#
+# permit 0.0.0.0/0 www.my_isp.com # except for the ISP's main web site
+#
+# permit 123.124.0.0/16 0.0.0.0/0 # the ISP's clients can go anywhere
+
+# Note that some hostnames may be listed with multiple IP addresses,
+# the primary value returned by gethostbyname() is used.
+#
+
+
+
diff -uNr ijb20.orig/junkbuster.config ijb20/junkbuster.config
--- ijb20.orig/junkbuster.config Wed Dec 31 19:00:00 1969
+++ ijb20/junkbuster.config Sun Nov 16 14:16:27 1997
@@ -0,0 +1,117 @@
+# Sample Configuration file for the Internet Junkbuster 2.0
+
+# Copyright 1997 Junkbusters Corporation. For distribution, modification and
+# use under the GNU General Public License. These files come with NO WARRANTY.
+# See http://www.junkbusters.com/ht/en/gpl.html or the README file for details.
+#
+# For information see http://www.junkbusters.com/ht/en/ijbman.html
+# or the documentation that came with the release
+
+# the blockfile contains patterns to be blocked by the proxy
+#
+blockfile /etc/blocklist # comments are OK here, too
+#
+# or can use full paths for files, like so
+#
+#blockfile /usr/local/lib/junkbusters/blockfile
+
+# the cookiefile contains patterns to specify the cookie management policy
+#
+cookiefile /etc/cookiefile
+
+# the logfile is where all logging and error messages are written
+#
+# Root may want to create the file first. (If user runs the junkbuster)
+#
+#logfile /var/log/junkbuster.logfile
+
+# the jarfile is where cookies can be stored
+#
+#jarfile /var/log/junkbuster.jarfile
+
+# the forwardfile defines domain-specific routing
+#
+#forwardfile /etc/junkbuster.forward
+
+# file which lists and into which trusted domains are written
+#
+#trustfile /etc/junkbuster.trust
+# files specify locations of "for information about trusted referers, see.."
+# multiple trust_info_url lines are OK
+#
+# trust_info_url http://internet.junkbuster.com/
+# trust_info_url http://www.yoursite.com/trust_policy.html
+#
+
+# The access control list file can be used to restrict IP addresses
+# that are permitted to use the proxy (see warnings in the FAQ).
+#
+#aclfile /etc/junkbuster.aclfile
+
+# add an "X-Forwarded-For:" specification to each request header
+#
+#add-forwarded-header
+
+# if logging cookies into a jarfile, and no other wafers were
+# explicity set, then by default a vanilla wafer is sent with
+# each request.
+#
+# setting 'suppress-vanilla-wafer' stops this vanilla wafer from
+# being sent.
+#
+#suppress-vanilla-wafer
+
+# add these wafers to each request header
+# multiple wafer lines are OK
+#
+#wafer NOTE=Like most people, I want my browsing to be anonymous.
+#wafer WARNING=Please do not attempt to track me.
+
+# Anything can be added to the request headers. Please don't litter.
+# multiple add-header lines are OK
+#
+#add-header Forwarded: by http://pro-privacy-isp.net
+#add-header Proxy-Connection: Keep-Alive
+
+# listen-address specifies where the Junkbuster will listen for connections
+# (it's equivalent to the -h option in Version 1)
+# The default is to bind to all IP addresses (INADDR_ANY)
+# Specifying a port is optional; if unspecified the defaults is 8000
+#
+#listen-address localhost
+#listen-address 124.207.250.245:8080
+
+# user-agent specifies treatment of the "User-Agent:" (and "UA-*:") header(s)
+#
+#user-agent @
+
+# referer specifies treatment of the "Referer:" header
+#
+#referer @
+
+# from specifies value to be subsituted if browser provides a "From:" header
+#
+#from spam-me-senseless@sittingduck.net
+
+# hide-console is used only on Win32. It instructs the Internet Junkbuster
+# to disconnect from and hide the command console
+#
+#hide-console
+
+# debug sets the level of debugging information to log in the logfile
+#
+# debug 1 # GPC = show each GET/POST/CONNECT request
+# debug 2 # CONN = show each connection status
+# debug 4 # IO = show I/O status
+# debug 8 # HDR = show header parsing
+# debug 16 # LOG = log all data into the logfile
+#
+# multiple "debug" directives, are OK - they're logical-OR'd together
+#
+# debug 15 # same as setting the first 4 listed above
+
+# single-threaded operation (i.e. disallows multiple threads or processes)
+# This is most often used for debugging because it keeps the
+# debugging output "in order" for easy reading.
+#
+#single-threaded
diff -uNr ijb20.orig/junkbuster.forward ijb20/junkbuster.forward
--- ijb20.orig/junkbuster.forward Wed Dec 31 19:00:00 1969
+++ ijb20/junkbuster.forward Sun Nov 16 14:16:27 1997
@@ -0,0 +1,77 @@
+# Forwarding specification for Internet Junkbuster 2.0
+#
+# Copyright 1997 Junkbusters Corporation. For distribution, modification and
+# use under the GNU General Public License. These files come with NO WARRANTY.
+# See http://www.junkbusters.com/ht/en/gpl.html or the README file for details.
+#
+# This feature allows routing of HTTP requests via multiple proxies.
+# It can be used to better protect privacy and confidentiality when
+# accessing specific domains by routing requests to those domains
+# to a special purpose filtering proxy such as lpwa.com
+#
+# It can also be used in an environmnent with multiple networks to route
+# requests via multiple gateways allowing transparent access to multiple
+# networks without having to modify browser configurations.
+#
+# Also specified here are special gateway protocols such as SOCKS.
+
+# The syntax of each line is
+#
+# target_domain[:port][/path] forwarding_domain[:port] gateway_type gateway_domain[:port]
+#
+
+# A '.' in the forwarding domain/port means that requests made to the
+# target domain are not forwarded but are made directly by the proxy
+# (though the proxy may still use a gateway to contact the server)
+#
+# Lines are checked in turn, and the last match wins.
+#
+# There is an implicit line equivalent to the following, which specifies that
+# anything not finding a match on the list is to go out without forwarding
+# or gateway protocol; like so:
+#
+# * . . . # implicit
+
+# In this fictitious example, everything goes via an ISP's caching proxy,
+# except requests to that ISP
+#
+# * caching.myisp.net:8000 . .
+# myisp.net . . .
+
+# In this example direct connections are made to all "internal" domains,
+# but everything else goes through Lucent's LPWA by way of the company's
+# SOCKS gateway to the Internet.
+#
+# * lpwa.com:8000 socks argyle.my_company.com:1080
+# my_company.com . . .
+
+# This is how you could set up a site that always uses SOCKS but no forwarders
+#
+# * . socks knee.my_company.com:1080
+
+# An advanced example for network administrators.
+#
+# If you're in a situation where you have links to multiple
+# ISP's that provide various special content to their subscribers
+# you can configure forwarding to pass requests to the specific
+# host that's connected to that ISP so that everybody can see
+# all of the content on all of the ISP's.
+# (whew! how's that for a run-on sentence?)
+#
+# This is tricky, but here's a sample:
+#
+# host-a has a PPP connection to isp-a.com
+# host-b has a PPP connection to isp-b.com
+
+# host-a can run an Internet Junkbusters with forwarding like this:
+#
+# / . . .
+# isp-b.com host-b:8000 . .
+#
+# host-b can run an Internet Junkbusters with forwarding like this:
+# / . . .
+# isp-a.com host-a:8000 . .
+#
+# Now, *anyone* on the Internet (including users on host-a and host-b)
+# can set their browser's proxy to *either* host-a or host-b and
+# be able to browse the content on isp-a or isp-b.
diff -uNr ijb20.orig/junkbuster.init ijb20/junkbuster.init
--- ijb20.orig/junkbuster.init Wed Dec 31 19:00:00 1969
+++ ijb20/junkbuster.init Sun Nov 16 14:16:27 1997
@@ -0,0 +1,42 @@
+#!/bin/sh
+#
+# This is file /etc/rc.d/init.d/junkbuster.init and was put here
+# by junkbuster-2.0-0.{i386,...}.rpm
+#
+# junkbuster This shell script takes care of starting and stopping
+# junkbuster.
+#
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+[ -f /usr/sbin/junkbuster ] || exit 0
+
+# See how we were called.
+case "$1" in
+ start)
+ #
+ #
+ echo -n "Starting junkbuster:"
+
+ # old:
+ # /usr/sbin/junkbuster
+ # -b /etc/blocklist
+ # -u .
+ # -c /etc/cookiefile
+ # -r @ &
+ /usr/sbin/junkbuster /etc/junkbuster.config &
+ echo ... done.
+ ;;
+ stop)
+ # Stop daemon.
+ echo -n "Shutting down junkbuster: "
+ killproc junkbuster
+ echo ... done.
+ ;;
+ *)
+ echo "Usage: junkbuster.init {start|stop}"
+ exit 1
+esac
+
+exit 0
diff -uNr ijb20.orig/junkbuster.trust ijb20/junkbuster.trust
--- ijb20.orig/junkbuster.trust Wed Dec 31 19:00:00 1969
+++ ijb20/junkbuster.trust Sun Nov 16 14:16:27 1997
@@ -0,0 +1,22 @@
+# Illustrative Trustfile for the Internet Junkbuster
+#
+# Copyright 1997 Junkbusters Corporation. For distribution, modification and
+# use under the GNU General Public License. These files come with NO WARRANTY.
+# See http://www.junkbusters.com/ht/en/gpl.html or the README file for details.
+
+# For more detail, see http://www.junkbusters.com/ht/en/ijbman.html#trustfile
+#
+# This is like parsed exactly like a blockfile, except that a '+'
+# in column one is treated like a '~' (i.e. doesn't block) and
+# it adds the spec to the trusted-referer list.
+#
+# Also, the default is to block any URL that is NOT mentioned on this list.
+#
+# While browsing, the domains for URLs that are referred by a trusted referer
+# are added to this list. Thus this acts as a "white-list" of OK places
+# to browse. Note this means that the file will grow longer with use.
+#
+# Example: to allow only links that came from yahooligans, uncomment this line
+# +yahooligans.com
+# and remove the last line (* alone), which unblock everything:
+*
diff -uNr ijb20.orig/saclfile.txt ijb20/saclfile.txt
--- ijb20.orig/saclfile.txt Fri Sep 12 17:00:00 1997
+++ ijb20/saclfile.txt Sun Nov 16 14:16:27 1997
@@ -1,100 +1,100 @@
-# Access Control List for the Internet Junkbuster 2.0
-#
-# Copyright 1997 Junkbusters Corporation. For distribution, modification and
-# use under the GNU General Public License. These files come with NO WARRANTY.
-# See http://www.junkbusters.com/ht/en/gpl.html or the README file for details.
-#
-# Note: we provided this feature due to popular demand from ISPs,
-# please be reminded that the FAQ states that this proxy is not
-# intended to be a substitute for a firewall or to encourage anyone
-# to defer addressing basic security weaknesses.
-
-# If no access file is provided, the proxy talks to anyone that connects.
-# If an access file is provided, the proxy talks only to IP addresses
-# permitted somewhere in this file and not denied later in this file.
-#
-# Summary -- if using an ACL:
-#
-# Client must have permission to receive service
-# LAST match in ACL file wins
-# Default behavior is to deny service
-#
-# Syntax for an entry in an Access Control List is:
-#
-# ACTION SRC_ADDR[/SRC_MASKLEN] [ DST_ADDR[/DST_MASKLEN] ]
-#
-# where the fields are
-#
-# ACTION = "permit" | "deny"
-#
-# SRC_ADDR = client hostname or dotted IP address
-# SRC_MASKLEN = number of bits in the subnet mask for the source
-#
-# DST_ADDR = server or forwarder hostname or dotted IP address
-# DST_MASKLEN = number of bits in the subnet mask for the target
-#
-# field separator (FS) is whitespace (space or tab)
-#
-# IMPORTANT NOTE
-# ==============
-# If the junkbuster is using a forwarder or a gateway for a particular
-# destination URL, the DST_ADDRR that is examined is the address of
-# the forwarder or the gateway and NOT the address of the ultimate target.
-# This is necessary because it may be impossible for the local
-# junkbuster to determine the address of the ultimate target
-# (that's often what gateways are used for).
-#
-# Here are a few examples to show how the ACL works:
-
-# localhost is OK -- no DST_ADDR implies that ALL destination addresses are OK
-# permit localhost
-
-# a silly example to illustrate:
-#
-# permit any host on the class-C subnet with junkbusters to go anywhere
-#
-# permit www.junkbusters.com/24
-#
-# except deny one particular IP address from using it at all
-#
-# deny ident.junkbusters.com
-
-# another example
-#
-# you can specify an explicit network address and subnet mask
-# explict addresses do not have to be resolved to be used.
-#
-# permit 207.153.200.0/24
-
-# a subnet mask of 0 matches anything, so the next line permits everyone.
-#
-# permit 0.0.0.0/0
-
-# Note: you cannot say
-#
-# permit .org
-#
-# to allow all .org domains; every IP-address listed must resolve fully.
-
-# An ISP may want to provide a junkbuster that is accessible by "the world"
-# and yet restrict use of some of their private content to hosts on its
-# internal network (i.e. its own subscribers). Say, for instance the
-# ISP owns the Class-B IP address block 123.124.0.0 (a 16 bit netmask).
-# This is how they could do it:
-
-# permit 0.0.0.0/0 0.0.0.0/0 # other clients can go anywhere
-# with the following exceptions:
-#
-# deny 0.0.0.0/0 123.124.0.0/16 # block all external requests for
-# sites on the ISP's network
-#
-# permit 0.0.0.0/0 www.my_isp.com # except for the ISP's main web site
-#
-# permit 123.124.0.0/16 0.0.0.0/0 # the ISP's clients can go anywhere
-
-# Note that some hostnames may be listed with multiple IP addresses,
-# the primary value returned by gethostbyname() is used.
-#
-
-
-
+# Access Control List for the Internet Junkbuster 2.0
+#
+# Copyright 1997 Junkbusters Corporation. For distribution, modification and
+# use under the GNU General Public License. These files come with NO WARRANTY.
+# See http://www.junkbusters.com/ht/en/gpl.html or the README file for details.
+#
+# Note: we provided this feature due to popular demand from ISPs,
+# please be reminded that the FAQ states that this proxy is not
+# intended to be a substitute for a firewall or to encourage anyone
+# to defer addressing basic security weaknesses.
+
+# If no access file is provided, the proxy talks to anyone that connects.
+# If an access file is provided, the proxy talks only to IP addresses
+# permitted somewhere in this file and not denied later in this file.
+#
+# Summary -- if using an ACL:
+#
+# Client must have permission to receive service
+# LAST match in ACL file wins
+# Default behavior is to deny service
+#
+# Syntax for an entry in an Access Control List is:
+#
+# ACTION SRC_ADDR[/SRC_MASKLEN] [ DST_ADDR[/DST_MASKLEN] ]
+#
+# where the fields are
+#
+# ACTION = "permit" | "deny"
+#
+# SRC_ADDR = client hostname or dotted IP address
+# SRC_MASKLEN = number of bits in the subnet mask for the source
+#
+# DST_ADDR = server or forwarder hostname or dotted IP address
+# DST_MASKLEN = number of bits in the subnet mask for the target
+#
+# field separator (FS) is whitespace (space or tab)
+#
+# IMPORTANT NOTE
+# ==============
+# If the junkbuster is using a forwarder or a gateway for a particular
+# destination URL, the DST_ADDRR that is examined is the address of
+# the forwarder or the gateway and NOT the address of the ultimate target.
+# This is necessary because it may be impossible for the local
+# junkbuster to determine the address of the ultimate target
+# (that's often what gateways are used for).
+#
+# Here are a few examples to show how the ACL works:
+
+# localhost is OK -- no DST_ADDR implies that ALL destination addresses are OK
+# permit localhost
+
+# a silly example to illustrate:
+#
+# permit any host on the class-C subnet with junkbusters to go anywhere
+#
+# permit www.junkbusters.com/24
+#
+# except deny one particular IP address from using it at all
+#
+# deny ident.junkbusters.com
+
+# another example
+#
+# you can specify an explicit network address and subnet mask
+# explict addresses do not have to be resolved to be used.
+#
+# permit 207.153.200.0/24
+
+# a subnet mask of 0 matches anything, so the next line permits everyone.
+#
+# permit 0.0.0.0/0
+
+# Note: you cannot say
+#
+# permit .org
+#
+# to allow all .org domains; every IP-address listed must resolve fully.
+
+# An ISP may want to provide a junkbuster that is accessible by "the world"
+# and yet restrict use of some of their private content to hosts on its
+# internal network (i.e. its own subscribers). Say, for instance the
+# ISP owns the Class-B IP address block 123.124.0.0 (a 16 bit netmask).
+# This is how they could do it:
+
+# permit 0.0.0.0/0 0.0.0.0/0 # other clients can go anywhere
+# with the following exceptions:
+#
+# deny 0.0.0.0/0 123.124.0.0/16 # block all external requests for
+# sites on the ISP's network
+#
+# permit 0.0.0.0/0 www.my_isp.com # except for the ISP's main web site
+#
+# permit 123.124.0.0/16 0.0.0.0/0 # the ISP's clients can go anywhere
+
+# Note that some hostnames may be listed with multiple IP addresses,
+# the primary value returned by gethostbyname() is used.
+#
+
+
+
diff -uNr ijb20.orig/sblock.txt ijb20/sblock.txt
--- ijb20.orig/sblock.txt Fri Sep 12 17:00:00 1997
+++ ijb20/sblock.txt Sun Nov 16 14:16:27 1997
@@ -1,50 +1,50 @@
-# Illustrative Blockfile for the Internet Junkbuster
-#
-# Copyright 1997 Junkbusters Corporation. For distribution, modification and
-# use under the GNU General Public License. These files come with NO WARRANTY.
-# See http://www.junkbusters.com/ht/en/gpl.html or the README file for details.
-#
-# For more detail, see http://www.junkbusters.com/ht/en/ijbfaq.html#blocking
-#
-# More comprehensive blockfiles are available elsewhere, try searching
-# documents that mention "junkbuster" and are called "blocklist" e.g.
-# http://altavista.digital.com/cgi-bin/query?pg=q&what=web&fmt=.&q=%2Bjunkbuster+%2Burl%3Ablocklist
-
-# Empty lines and comment lines beginning with a # is ignored.
-
-# The following line should be included to block use of telnet (port 23)
-:23
-# for more detail see http://www.junkbusters/com/ht/en/ijbfaq.html#attack
-
-# To block a particular URL, you can list it in full (omit the http://):
-www.junkbusters.com/images/space.gif
-
-# Almost all the following examples are commented out. To make them work,
-# remove the comment so that this:
-# www7.suckerfinder.com/cgi-bin/compost_tumbler/strayed-in-from=14387
-# looks like this:
-www7.suckerfinder.com/cgi-bin/compost_tumbler/strayed-in-from=14387
-
-# You can chop off parts on the left and right to get a broader block:
-suckerfinder.com/cgi-bin/compost_tumbler/
-
-# To block an entire site, simply include its domain name:
-# ad.manipumedia.net
-# patentlyoffensive.com
-
-# With no hostname, a pathname blocks regardless of the domain name:
-# /images/banners/mindless/
-# /bandwidth-hogs/
-
-# Provided pattern matching option was used in the Makefile (now the default)
-# you can use patterns such as
-# the /*.* allows matches anywhere in the URL
-# /*.*banner
-# /*.*/DespisedProductName.*.gif
-# you can put * in the domain part only, not the path.
-# ad*.*.*
-# For more details see http://www.junkbusters.com/ht/en/ijbfaq.html#regex
-
-# The ~ character in column one stops blocking if a previous pattern matched.
-# The last match wins, so these exceptions are usually placed at the end.
-# ~mycompany.com
+# Illustrative Blockfile for the Internet Junkbuster
+#
+# Copyright 1997 Junkbusters Corporation. For distribution, modification and
+# use under the GNU General Public License. These files come with NO WARRANTY.
+# See http://www.junkbusters.com/ht/en/gpl.html or the README file for details.
+#
+# For more detail, see http://www.junkbusters.com/ht/en/ijbfaq.html#blocking
+#
+# More comprehensive blockfiles are available elsewhere, try searching
+# documents that mention "junkbuster" and are called "blocklist" e.g.
+# http://altavista.digital.com/cgi-bin/query?pg=q&what=web&fmt=.&q=%2Bjunkbuster+%2Burl%3Ablocklist
+
+# Empty lines and comment lines beginning with a # is ignored.
+
+# The following line should be included to block use of telnet (port 23)
+:23
+# for more detail see http://www.junkbusters/com/ht/en/ijbfaq.html#attack
+
+# To block a particular URL, you can list it in full (omit the http://):
+www.junkbusters.com/images/space.gif
+
+# Almost all the following examples are commented out. To make them work,
+# remove the comment so that this:
+# www7.suckerfinder.com/cgi-bin/compost_tumbler/strayed-in-from=14387
+# looks like this:
+www7.suckerfinder.com/cgi-bin/compost_tumbler/strayed-in-from=14387
+
+# You can chop off parts on the left and right to get a broader block:
+suckerfinder.com/cgi-bin/compost_tumbler/
+
+# To block an entire site, simply include its domain name:
+# ad.manipumedia.net
+# patentlyoffensive.com
+
+# With no hostname, a pathname blocks regardless of the domain name:
+# /images/banners/mindless/
+# /bandwidth-hogs/
+
+# Provided pattern matching option was used in the Makefile (now the default)
+# you can use patterns such as
+# the /*.* allows matches anywhere in the URL
+# /*.*banner
+# /*.*/DespisedProductName.*.gif
+# you can put * in the domain part only, not the path.
+# ad*.*.*
+# For more details see http://www.junkbusters.com/ht/en/ijbfaq.html#regex
+
+# The ~ character in column one stops blocking if a previous pattern matched.
+# The last match wins, so these exceptions are usually placed at the end.
+# ~mycompany.com
diff -uNr ijb20.orig/sconfig.txt ijb20/sconfig.txt
--- ijb20.orig/sconfig.txt Fri Sep 12 17:00:00 1997
+++ ijb20/sconfig.txt Sun Nov 16 14:16:27 1997
@@ -1,115 +1,115 @@
-# Sample Configuration file for the Internet Junkbuster 2.0
-
-# Copyright 1997 Junkbusters Corporation. For distribution, modification and
-# use under the GNU General Public License. These files come with NO WARRANTY.
-# See http://www.junkbusters.com/ht/en/gpl.html or the README file for details.
-#
-# For information see http://www.junkbusters.com/ht/en/ijbman.html
-# or the documentation that came with the release
-
-# the blockfile contains patterns to be blocked by the proxy
-#
-#blockfile sblock.txt # comments are OK here, too
-#
-# or can use full paths for files, like so
-#
-#blockfile /usr/local/lib/junkbusters/blockfile
-
-# the cookiefile contains patterns to specify the cookie management policy
-#
-#cookiefile scookie.txt
-
-# the logfile is where all logging and error messages are written
-#
-#logfile logfile
-
-# the jarfile is where cookies can be stored
-#
-#jarfile jarfile
-
-# the forwardfile defines domain-specific routing
-#
-#forwardfile sforward.txt
-
-# file which lists and into which trusted domains are written
-#
-#trustfile strust.txt
-# files specify locations of "for information about trusted referers, see.."
-# multiple trust_info_url lines are OK
-#
-# trust_info_url http://internet.junkbuster.com/
-# trust_info_url http://www.yoursite.com/trust_policy.html
-#
-
-# The access control list file can be used to restrict IP addresses
-# that are permitted to use the proxy (see warnings in the FAQ).
-#
-#aclfile saclfile.txt
-
-# add an "X-Forwarded-For:" specification to each request header
-#
-#add-forwarded-header
-
-# if logging cookies into a jarfile, and no other wafers were
-# explicity set, then by default a vanilla wafer is sent with
-# each request.
-#
-# setting 'suppress-vanilla-wafer' stops this vanilla wafer from
-# being sent.
-#
-#suppress-vanilla-wafer
-
-# add these wafers to each request header
-# multiple wafer lines are OK
-#
-#wafer NOTE=Like most people, I want my browsing to be anonymous.
-#wafer WARNING=Please do not attempt to track me.
-
-# Anything can be added to the request headers. Please don't litter.
-# multiple add-header lines are OK
-#
-#add-header Forwarded: by http://pro-privacy-isp.net
-#add-header Proxy-Connection: Keep-Alive
-
-# listen-address specifies where the Junkbuster will listen for connections
-# (it's equivalent to the -h option in Version 1)
-# The default is to bind to all IP addresses (INADDR_ANY)
-# Specifying a port is optional; if unspecified the defaults is 8000
-#
-#listen-address localhost
-#listen-address 124.207.250.245:8080
-
-# user-agent specifies treatment of the "User-Agent:" (and "UA-*:") header(s)
-#
-#user-agent @
-
-# referer specifies treatment of the "Referer:" header
-#
-#referer @
-
-# from specifies value to be subsituted if browser provides a "From:" header
-#
-#from spam-me-senseless@sittingduck.net
-
-# hide-console is used only on Win32. It instructs the Internet Junkbuster
-# to disconnect from and hide the command console
-#
-#hide-console
-
-# debug sets the level of debugging information to log in the logfile
-#
-# debug 1 # GPC = show each GET/POST/CONNECT request
-# debug 2 # CONN = show each connection status
-# debug 4 # IO = show I/O status
-# debug 8 # HDR = show header parsing
-# debug 16 # LOG = log all data into the logfile
-#
-# multiple "debug" directives, are OK - they're logical-OR'd together
-#
-# debug 15 # same as setting the first 4 listed above
-
-# single-threaded operation (i.e. disallows multiple threads or processes)
-# This is most often used for debugging because it keeps the
-# debugging output "in order" for easy reading.
-#
-#single-threaded
+# Sample Configuration file for the Internet Junkbuster 2.0
+
+# Copyright 1997 Junkbusters Corporation. For distribution, modification and
+# use under the GNU General Public License. These files come with NO WARRANTY.
+# See http://www.junkbusters.com/ht/en/gpl.html or the README file for details.
+#
+# For information see http://www.junkbusters.com/ht/en/ijbman.html
+# or the documentation that came with the release
+
+# the blockfile contains patterns to be blocked by the proxy
+#
+#blockfile sblock.txt # comments are OK here, too
+#
+# or can use full paths for files, like so
+#
+#blockfile /usr/local/lib/junkbusters/blockfile
+
+# the cookiefile contains patterns to specify the cookie management policy
+#
+#cookiefile scookie.txt
+
+# the logfile is where all logging and error messages are written
+#
+#logfile logfile
+
+# the jarfile is where cookies can be stored
+#
+#jarfile jarfile
+
+# the forwardfile defines domain-specific routing
+#
+#forwardfile sforward.txt
+
+# file which lists and into which trusted domains are written
+#
+#trustfile strust.txt
+# files specify locations of "for information about trusted referers, see.."
+# multiple trust_info_url lines are OK
+#
+# trust_info_url http://internet.junkbuster.com/
+# trust_info_url http://www.yoursite.com/trust_policy.html
+#
+
+# The access control list file can be used to restrict IP addresses
+# that are permitted to use the proxy (see warnings in the FAQ).
+#
+#aclfile saclfile.txt
+
+# add an "X-Forwarded-For:" specification to each request header
+#
+#add-forwarded-header
+
+# if logging cookies into a jarfile, and no other wafers were
+# explicity set, then by default a vanilla wafer is sent with
+# each request.
+#
+# setting 'suppress-vanilla-wafer' stops this vanilla wafer from
+# being sent.
+#
+#suppress-vanilla-wafer
+
+# add these wafers to each request header
+# multiple wafer lines are OK
+#
+#wafer NOTE=Like most people, I want my browsing to be anonymous.
+#wafer WARNING=Please do not attempt to track me.
+
+# Anything can be added to the request headers. Please don't litter.
+# multiple add-header lines are OK
+#
+#add-header Forwarded: by http://pro-privacy-isp.net
+#add-header Proxy-Connection: Keep-Alive
+
+# listen-address specifies where the Junkbuster will listen for connections
+# (it's equivalent to the -h option in Version 1)
+# The default is to bind to all IP addresses (INADDR_ANY)
+# Specifying a port is optional; if unspecified the defaults is 8000
+#
+#listen-address localhost
+#listen-address 124.207.250.245:8080
+
+# user-agent specifies treatment of the "User-Agent:" (and "UA-*:") header(s)
+#
+#user-agent @
+
+# referer specifies treatment of the "Referer:" header
+#
+#referer @
+
+# from specifies value to be subsituted if browser provides a "From:" header
+#
+#from spam-me-senseless@sittingduck.net
+
+# hide-console is used only on Win32. It instructs the Internet Junkbuster
+# to disconnect from and hide the command console
+#
+#hide-console
+
+# debug sets the level of debugging information to log in the logfile
+#
+# debug 1 # GPC = show each GET/POST/CONNECT request
+# debug 2 # CONN = show each connection status
+# debug 4 # IO = show I/O status
+# debug 8 # HDR = show header parsing
+# debug 16 # LOG = log all data into the logfile
+#
+# multiple "debug" directives, are OK - they're logical-OR'd together
+#
+# debug 15 # same as setting the first 4 listed above
+
+# single-threaded operation (i.e. disallows multiple threads or processes)
+# This is most often used for debugging because it keeps the
+# debugging output "in order" for easy reading.
+#
+#single-threaded
diff -uNr ijb20.orig/scookie.txt ijb20/scookie.txt
--- ijb20.orig/scookie.txt Fri Sep 12 17:00:00 1997
+++ ijb20/scookie.txt Sun Nov 16 14:16:28 1997
@@ -1,21 +1,21 @@
-# Illustrative Cookiefile for the Internet Junkbuster
-# For more detail, see http://www.junkbusters.com/ht/en/ijbfaq.html#cookies
-
-# Copyright 1997 Junkbusters Corporation. For distribution, modification and
-# use under the GNU General Public License. These files come with NO WARRANTY.
-# See http://www.junkbusters.com/ht/en/gpl.html or the README file for details.
-
-# Empty lines and lines beginning with a # is ignored.
-# To permit an entire site to set cookies, simply include its domain name:
-really-trustyworthy-people.org
-
-# You can allow cookies out, but stop them coming in:
->send-user-cookies.com
-# For more details see http://www.junkbusters.com/ht/en/ijbfaq.html#crumble
-
-# With the -r @ option the cookiefile also allows selective disclosure of
-# Referer. The following line gives it to Intellicast's map server. (At
-# least at the time of writing; check View Document Info on the referring page)
-# For more details see http://www.junkbusters.com/ht/en/ijbfaq.html#breakage
->uclick.com
->208.194.150.32
+# Illustrative Cookiefile for the Internet Junkbuster
+# For more detail, see http://www.junkbusters.com/ht/en/ijbfaq.html#cookies
+
+# Copyright 1997 Junkbusters Corporation. For distribution, modification and
+# use under the GNU General Public License. These files come with NO WARRANTY.
+# See http://www.junkbusters.com/ht/en/gpl.html or the README file for details.
+
+# Empty lines and lines beginning with a # is ignored.
+# To permit an entire site to set cookies, simply include its domain name:
+really-trustyworthy-people.org
+
+# You can allow cookies out, but stop them coming in:
+>send-user-cookies.com
+# For more details see http://www.junkbusters.com/ht/en/ijbfaq.html#crumble
+
+# With the -r @ option the cookiefile also allows selective disclosure of
+# Referer. The following line gives it to Intellicast's map server. (At
+# least at the time of writing; check View Document Info on the referring page)
+# For more details see http://www.junkbusters.com/ht/en/ijbfaq.html#breakage
+>uclick.com
+>208.194.150.32
diff -uNr ijb20.orig/sforward.txt ijb20/sforward.txt
--- ijb20.orig/sforward.txt Fri Sep 12 17:00:00 1997
+++ ijb20/sforward.txt Sun Nov 16 14:16:28 1997
@@ -1,77 +0,0 @@
-# Forwarding specification for Internet Junkbuster 2.0
-#
-# Copyright 1997 Junkbusters Corporation. For distribution, modification and
-# use under the GNU General Public License. These files come with NO WARRANTY.
-# See http://www.junkbusters.com/ht/en/gpl.html or the README file for details.
-#
-# This feature allows routing of HTTP requests via multiple proxies.
-# It can be used to better protect privacy and confidentiality when
-# accessing specific domains by routing requests to those domains
-# to a special purpose filtering proxy such as lpwa.com
-#
-# It can also be used in an environmnent with multiple networks to route
-# requests via multiple gateways allowing transparent access to multiple
-# networks without having to modify browser configurations.
-#
-# Also specified here are special gateway protocols such as SOCKS.
-
-# The syntax of each line is
-#
-# target_domain[:port][/path] forwarding_domain[:port] gateway_type gateway_domain[:port]
-#
-
-# A '.' in the forwarding domain/port means that requests made to the
-# target domain are not forwarded but are made directly by the proxy
-# (though the proxy may still use a gateway to contact the server)
-#
-# Lines are checked in turn, and the last match wins.
-#
-# There is an implicit line equivalent to the following, which specifies that
-# anything not finding a match on the list is to go out without forwarding
-# or gateway protocol; like so:
-#
-# * . . . # implicit
-
-# In this fictitious example, everything goes via an ISP's caching proxy,
-# except requests to that ISP
-#
-# * caching.myisp.net:8000 . .
-# myisp.net . . .
-
-# In this example direct connections are made to all "internal" domains,
-# but everything else goes through Lucent's LPWA by way of the company's
-# SOCKS gateway to the Internet.
-#
-# * lpwa.com:8000 socks argyle.my_company.com:1080
-# my_company.com . . .
-
-# This is how you could set up a site that always uses SOCKS but no forwarders
-#
-# * . socks knee.my_company.com:1080
-
-# An advanced example for network administrators.
-#
-# If you're in a situation where you have links to multiple
-# ISP's that provide various special content to their subscribers
-# you can configure forwarding to pass requests to the specific
-# host that's connected to that ISP so that everybody can see
-# all of the content on all of the ISP's.
-# (whew! how's that for a run-on sentence?)
-#
-# This is tricky, but here's a sample:
-#
-# host-a has a PPP connection to isp-a.com
-# host-b has a PPP connection to isp-b.com
-
-# host-a can run an Internet Junkbusters with forwarding like this:
-#
-# / . . .
-# isp-b.com host-b:8000 . .
-#
-# host-b can run an Internet Junkbusters with forwarding like this:
-# / . . .
-# isp-a.com host-a:8000 . .
-#
-# Now, *anyone* on the Internet (including users on host-a and host-b)
-# can set their browser's proxy to *either* host-a or host-b and
-# be able to browse the content on isp-a or isp-b.
diff -uNr ijb20.orig/strust.txt ijb20/strust.txt
--- ijb20.orig/strust.txt Fri Sep 12 17:00:00 1997
+++ ijb20/strust.txt Sun Nov 16 14:16:28 1997
@@ -1,22 +0,0 @@
-# Illustrative Trustfile for the Internet Junkbuster
-#
-# Copyright 1997 Junkbusters Corporation. For distribution, modification and
-# use under the GNU General Public License. These files come with NO WARRANTY.
-# See http://www.junkbusters.com/ht/en/gpl.html or the README file for details.
-
-# For more detail, see http://www.junkbusters.com/ht/en/ijbman.html#trustfile
-#
-# This is like parsed exactly like a blockfile, except that a '+'
-# in column one is treated like a '~' (i.e. doesn't block) and
-# it adds the spec to the trusted-referer list.
-#
-# Also, the default is to block any URL that is NOT mentioned on this list.
-#
-# While browsing, the domains for URLs that are referred by a trusted referer
-# are added to this list. Thus this acts as a "white-list" of OK places
-# to browse. Note this means that the file will grow longer with use.
-#
-# Example: to allow only links that came from yahooligans, uncomment this line
-# +yahooligans.com
-# and remove the last line (* alone), which unblock everything:
-*
