pkg://kftp-0.4.0-1.src.rpm:315188/kftp-0.4.0.tar.gz
info downloads
kftp-0.4.0/ 777 1750 1750 0 6673646366 5632 5 kftp-0.4.0/Makefile.in 644 1750 1750 23441 6673646363 7714 # Makefile.in generated automatically by automake 1.3 from Makefile.am
# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
SHELL = /bin/sh
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
DISTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
DATADIRNAME = @DATADIRNAME@
GENCAT = @GENCAT@
GMOFILES = @GMOFILES@
GMSGFMT = @GMSGFMT@
GNOMEGNORBA_LIBS = @GNOMEGNORBA_LIBS@
GNOMEUI_LIBS = @GNOMEUI_LIBS@
GNOME_APPLET_LIBS = @GNOME_APPLET_LIBS@
GNOME_CONFIG = @GNOME_CONFIG@
GNOME_INCLUDEDIR = @GNOME_INCLUDEDIR@
GNOME_LIBDIR = @GNOME_LIBDIR@
GNOME_LIBS = @GNOME_LIBS@
GNORBA_CFLAGS = @GNORBA_CFLAGS@
GNORBA_LIBS = @GNORBA_LIBS@
GTKXMHTML_LIBS = @GTKXMHTML_LIBS@
GTK_CFLAGS = @GTK_CFLAGS@
GTK_CONFIG = @GTK_CONFIG@
GTK_LIBS = @GTK_LIBS@
GT_NO = @GT_NO@
GT_YES = @GT_YES@
INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
INSTOBJEXT = @INSTOBJEXT@
INTLDEPS = @INTLDEPS@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
LD = @LD@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
NM = @NM@
ORBIT_CFLAGS = @ORBIT_CFLAGS@
ORBIT_CONFIG = @ORBIT_CONFIG@
ORBIT_IDL = @ORBIT_IDL@
ORBIT_LIBS = @ORBIT_LIBS@
PACKAGE = @PACKAGE@
POFILES = @POFILES@
POSUB = @POSUB@
PTHREAD_LIB = @PTHREAD_LIB@
RANLIB = @RANLIB@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
XPM_LIBS = @XPM_LIBS@
l = @l@
SUBDIRS = doc macros src
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_CLEAN_FILES =
DIST_COMMON = README AUTHORS COPYING ChangeLog INSTALL Makefile.am \
Makefile.in NEWS TODO acinclude.m4 aclocal.m4 config.guess config.sub \
configure configure.in install-sh ltconfig ltmain.sh missing \
mkinstalldirs
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = tar
GZIP = --best
all: all-recursive all-am
.SUFFIXES:
$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) \
&& CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
$(ACLOCAL_M4): @MAINT@ configure.in acinclude.m4
cd $(srcdir) && $(ACLOCAL)
config.status: $(srcdir)/configure
$(SHELL) ./config.status --recheck
$(srcdir)/configure: @MAINT@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
cd $(srcdir) && $(AUTOCONF)
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
@SET_MAKE@
all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
list='$(SUBDIRS)'; for subdir in $$list; do \
target=`echo $@ | sed s/-recursive//`; \
echo "Making $$target in $$subdir"; \
(cd $$subdir && $(MAKE) $$target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
rev="$$subdir $$rev"; \
done; \
for subdir in $$rev; do \
target=`echo $@ | sed s/-recursive//`; \
echo "Making $$target in $$subdir"; \
(cd $$subdir && $(MAKE) $$target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
(cd $$subdir && $(MAKE) tags); \
done
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP)
here=`pwd` && cd $(srcdir) \
&& mkid -f$$here/ID $(SOURCES) $(HEADERS) $(LISP)
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
done; \
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
mostlyclean-tags:
clean-tags:
distclean-tags:
-rm -f TAGS ID
maintainer-clean-tags:
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
-rm -rf $(distdir)
GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz
mkdir $(distdir)/=build
mkdir $(distdir)/=inst
dc_install_base=`cd $(distdir)/=inst && pwd`; \
cd $(distdir)/=build \
&& ../configure --srcdir=.. --prefix=$$dc_install_base \
&& $(MAKE) \
&& $(MAKE) dvi \
&& $(MAKE) check \
&& $(MAKE) install \
&& $(MAKE) installcheck \
&& $(MAKE) dist
-rm -rf $(distdir)
@echo "========================"; \
echo "$(distdir).tar.gz is ready for distribution"; \
echo "========================"
dist: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
dist-all: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
distdir: $(DISTFILES)
-rm -rf $(distdir)
mkdir $(distdir)
-chmod 777 $(distdir)
@for file in $(DISTFILES); do \
d=$(srcdir); \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file; \
done
for subdir in $(SUBDIRS); do \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
chmod 777 $(distdir)/$$subdir; \
(cd $$subdir && $(MAKE) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
|| exit 1; \
done
info: info-recursive
dvi: dvi-recursive
check: all-am
$(MAKE) check-recursive
installcheck: installcheck-recursive
all-am: Makefile
install-exec: install-exec-recursive
@$(NORMAL_INSTALL)
install-data: install-data-recursive
@$(NORMAL_INSTALL)
install: install-recursive
@:
uninstall: uninstall-recursive
install-strip:
$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
installdirs: installdirs-recursive
mostlyclean-generic:
-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-rm -f Makefile $(DISTCLEANFILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
mostlyclean-am: mostlyclean-tags mostlyclean-generic
clean-am: clean-tags clean-generic mostlyclean-am
distclean-am: distclean-tags distclean-generic clean-am
maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
distclean-am
mostlyclean: mostlyclean-recursive mostlyclean-am
clean: clean-recursive clean-am
distclean: distclean-recursive distclean-am
-rm -f config.status
-rm -f libtool
maintainer-clean: maintainer-clean-recursive maintainer-clean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
-rm -f config.status
.PHONY: install-data-recursive uninstall-data-recursive \
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
uninstalldirs-recursive all-recursive check-recursive \
installcheck-recursive info-recursive dvi-recursive \
mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info dvi \
installcheck all-am install-exec install-data install uninstall all \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
#@MAINT@include macros/macros.dep
#@MAINT@macros/macros.dep: macros/Makefile.am
#@MAINT@ cd macros && $(MAKE) macros.dep
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
kftp-0.4.0/README 644 1750 1750 1061 6667410174 6471 Kevlar FTP is a clone of Bulletproof Software's Bulletproof FTP. Get it?
Bulletproof, Kevlar? Yeah, ha-ha. Anyway, I plan to implement all features
of Bulletproof FTP, and more. In the meantime, what you get is a fairly
nice looking FTP client that can navigate remote hosts and download files.
Uploading, symbolic links, and the transfer queue are all in the future.
Be patient :).
It should compile on all systems with GTK+ >= 1.1.12 and Gnome >= 0.99.
Anything else, your guess is as good as mine. I have GTK+ 1.2.0 and
Gnome 0.99.8.1, and it works for me.
kftp-0.4.0/AUTHORS 644 1750 1750 53 6667407535 6630 Eric Gillespie, Jr. <epgilles@olemiss.edu>
kftp-0.4.0/COPYING 644 1750 1750 43127 6655074504 6675 GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their
rights.
We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The "Program", below,
refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another
language. (Hereinafter, translation is included without limitation in
the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide
a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.
In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer
to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such
an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to
control compilation and installation of the executable. However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the Program
specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) 19yy <name of author>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) 19yy name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, the commands you use may
be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library. If this is what you want to do, use the GNU Library General
Public License instead of this License.
kftp-0.4.0/ChangeLog 644 1750 1750 1125 6673641062 7363 1999-03-16 Eric Gillespie Jr. <epgilles@olemiss.edu>
* src/kftp.c (MakeApp): Added queue menu
(MakeFileListings): Cleaned up CLists and fixed problem with titles
scrolling out of view and not resizing properly
* src/transfer.c: Mostly functional progress bar
* src/queue.c: Partially functional queue
1999-03-03 Eric Gillespie Jr. <epgilles@olemiss.edu>
* Moved downloading stuff to transfer.c
1999-03-02 Eric Gillespie Jr. <epgilles@olemiss.edu>
* Created a ChangeLog!
* Now makes use of automake and autoconf
* Converted to GTK 1.2 and Gnome 0.99
* Version up to 0.4.0
kftp-0.4.0/INSTALL 644 1750 1750 1475 6667410511 6646 Kevlar FTP is a clone of Bulletproof Software's Bulletproof FTP. Get it?
Bulletproof, Kevlar? Yeah, ha-ha. Anyway, I plan to implement all features
of Bulletproof FTP, and more. In the meantime, what you get is a fairly
nice looking FTP client that can navigate remote hosts and download files.
Uploading, symbolic links, and the transfer queue are all in the future.
Be patient :).
COMPILING
---------
1. Untar the kftp-x.xx.tar.gz
$ tar zxf kftp-x.xx.tar.gz
This will create a subdirectory, kftp-x.xx/
2. cd kftp-x.xx/
3. Building Kevlar FTP
$ ./configure
This will create the Makefiles and configuration header files required to
build Kevlar FTP. For configuration options, run './configure --help'.
4. Run 'make' to compile everything.
INSTALLING
----------
1. As root, type 'make install'
That's it!
kftp-0.4.0/Makefile.am 644 1750 1750 346 6667304541 7632 SUBDIRS = doc macros src
## to automatically rebuild aclocal.m4 if any of the macros in
## `macros/' change
#@MAINT@include macros/macros.dep
#@MAINT@macros/macros.dep: macros/Makefile.am
#@MAINT@ cd macros && $(MAKE) macros.dep
kftp-0.4.0/NEWS 644 1750 1750 47 6667410706 6254 Changes in 0.4
* Added Gnome support
kftp-0.4.0/TODO 644 1750 1750 245 6667643736 6300 Less global variables.
Reorganize callbacks.c
Missing features:
* Transfer queue
* Site Manager
* Menus
* Various minor features
* Various major features :)
kftp-0.4.0/acinclude.m4 644 1750 1750 32111 6667326355 10031
######################################################################
# progtest.m4 from gettext 0.32
######################################################################
# Search path for a program which passes the given test.
# Ulrich Drepper <drepper@cygnus.com>, 1996.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 1
dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
AC_DEFUN(AM_PATH_PROG_WITH_TEST,
[# Extract the first word of "$2", so it can be a program name with args.
set dummy $2; ac_word=[$]2
AC_MSG_CHECKING([for $ac_word])
AC_CACHE_VAL(ac_cv_path_$1,
[case "[$]$1" in
/*)
ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in ifelse([$5], , $PATH, [$5]); do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if [$3]; then
ac_cv_path_$1="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
dnl If no 4th arg is given, leave the cache variable unset,
dnl so AC_PATH_PROGS will keep looking.
ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
])dnl
;;
esac])dnl
$1="$ac_cv_path_$1"
if test -n "[$]$1"; then
AC_MSG_RESULT([$]$1)
else
AC_MSG_RESULT(no)
fi
AC_SUBST($1)dnl
])
######################################################################
# lcmessage.m4 from gettext 0.32
######################################################################
# Check whether LC_MESSAGES is available in <locale.h>.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 1
AC_DEFUN(AM_LC_MESSAGES,
[if test $ac_cv_header_locale_h = yes; then
AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
[AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
if test $am_cv_val_LC_MESSAGES = yes; then
AC_DEFINE(HAVE_LC_MESSAGES)
fi
fi])
######################################################################
# gettext.m4 from gettext 0.32
######################################################################
# Macro to add for using GNU gettext.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 3
AC_DEFUN(AM_WITH_NLS,
[AC_MSG_CHECKING([whether NLS is requested])
dnl Default is enabled NLS
AC_ARG_ENABLE(nls,
[ --disable-nls do not use Native Language Support],
USE_NLS=$enableval, USE_NLS=yes)
AC_MSG_RESULT($USE_NLS)
AC_SUBST(USE_NLS)
USE_INCLUDED_LIBINTL=no
dnl If we use NLS figure out what method
if test "$USE_NLS" = "yes"; then
AC_DEFINE(ENABLE_NLS)
AC_MSG_CHECKING([whether included gettext is requested])
AC_ARG_WITH(included-gettext,
[ --with-included-gettext use the GNU gettext library included here],
nls_cv_force_use_gnu_gettext=$withval,
nls_cv_force_use_gnu_gettext=no)
AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
dnl User does not insist on using GNU NLS library. Figure out what
dnl to use. If gettext or catgets are available (in this order) we
dnl use this. Else we have to fall back to GNU NLS library.
dnl catgets is only used if permitted by option --with-catgets.
nls_cv_header_intl=
nls_cv_header_libgt=
CATOBJEXT=NONE
AC_CHECK_HEADER(libintl.h,
[AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
[AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
if test "$gt_cv_func_gettext_libc" != "yes"; then
AC_CHECK_LIB(intl, bindtextdomain,
[AC_CACHE_CHECK([for gettext in libintl],
gt_cv_func_gettext_libintl,
[AC_TRY_LINK([], [return (int) gettext ("")],
gt_cv_func_gettext_libintl=yes,
gt_cv_func_gettext_libintl=no)])])
fi
if test "$gt_cv_func_gettext_libc" = "yes" \
|| test "$gt_cv_func_gettext_libintl" = "yes"; then
AC_DEFINE(HAVE_GETTEXT)
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
if test "$MSGFMT" != "no"; then
AC_CHECK_FUNCS(dcgettext)
AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
return _nl_msg_cat_cntr],
[CATOBJEXT=.gmo
DATADIRNAME=share],
[CATOBJEXT=.mo
DATADIRNAME=lib])
INSTOBJEXT=.mo
fi
fi
])
if test "$CATOBJEXT" = "NONE"; then
AC_MSG_CHECKING([whether catgets can be used])
AC_ARG_WITH(catgets,
[ --with-catgets use catgets functions if available],
nls_cv_use_catgets=$withval, nls_cv_use_catgets=no)
AC_MSG_RESULT($nls_cv_use_catgets)
if test "$nls_cv_use_catgets" = "yes"; then
dnl No gettext in C library. Try catgets next.
AC_CHECK_LIB(i, main)
AC_CHECK_FUNC(catgets,
[AC_DEFINE(HAVE_CATGETS)
INTLOBJS="\$(CATOBJS)"
AC_PATH_PROG(GENCAT, gencat, no)dnl
if test "$GENCAT" != "no"; then
AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
if test "$GMSGFMT" = "no"; then
AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
fi
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
USE_INCLUDED_LIBINTL=yes
CATOBJEXT=.cat
INSTOBJEXT=.cat
DATADIRNAME=lib
INTLDEPS='$(top_builddir)/intl/libintl.a'
INTLLIBS=$INTLDEPS
LIBS=`echo $LIBS | sed -e 's/-lintl//'`
nls_cv_header_intl=intl/libintl.h
nls_cv_header_libgt=intl/libgettext.h
fi])
fi
fi
if test "$CATOBJEXT" = "NONE"; then
dnl Neither gettext nor catgets in included in the C library.
dnl Fall back on GNU gettext library.
nls_cv_use_gnu_gettext=yes
fi
fi
if test "$nls_cv_use_gnu_gettext" = "yes"; then
dnl Mark actions used to generate GNU NLS library.
INTLOBJS="\$(GETTOBJS)"
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
AC_SUBST(MSGFMT)
USE_INCLUDED_LIBINTL=yes
CATOBJEXT=.gmo
INSTOBJEXT=.mo
DATADIRNAME=share
INTLDEPS='$(top_builddir)/intl/libintl.a'
INTLLIBS=$INTLDEPS
LIBS=`echo $LIBS | sed -e 's/-lintl//'`
nls_cv_header_intl=intl/libintl.h
nls_cv_header_libgt=intl/libgettext.h
fi
dnl Test whether we really found GNU xgettext.
if test "$XGETTEXT" != ":"; then
dnl If it is no GNU xgettext we define it as : so that the
dnl Makefiles still can work.
if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
: ;
else
AC_MSG_RESULT(
[found xgettext programs is not GNU xgettext; ignore it])
XGETTEXT=":"
fi
fi
# We need to process the po/ directory.
POSUB=po
else
DATADIRNAME=share
nls_cv_header_intl=intl/libintl.h
nls_cv_header_libgt=intl/libgettext.h
fi
# If this is used in GNU gettext we have to set USE_NLS to `yes'
# because some of the sources are only built for this goal.
if test "$PACKAGE" = gettext; then
USE_NLS=yes
USE_INCLUDED_LIBINTL=yes
fi
dnl These rules are solely for the distribution goal. While doing this
dnl we only have to keep exactly one list of the available catalogs
dnl in configure.in.
for lang in $ALL_LINGUAS; do
GMOFILES="$GMOFILES $lang.gmo"
POFILES="$POFILES $lang.po"
done
dnl Make all variables we use known to autoconf.
AC_SUBST(USE_INCLUDED_LIBINTL)
AC_SUBST(CATALOGS)
AC_SUBST(CATOBJEXT)
AC_SUBST(DATADIRNAME)
AC_SUBST(GMOFILES)
AC_SUBST(INSTOBJEXT)
AC_SUBST(INTLDEPS)
AC_SUBST(INTLLIBS)
AC_SUBST(INTLOBJS)
AC_SUBST(POFILES)
AC_SUBST(POSUB)
])
AC_DEFUN(AM_GNU_GETTEXT,
[AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_ISC_POSIX])dnl
AC_REQUIRE([AC_HEADER_STDC])dnl
AC_REQUIRE([AC_C_CONST])dnl
AC_REQUIRE([AC_C_INLINE])dnl
AC_REQUIRE([AC_TYPE_OFF_T])dnl
AC_REQUIRE([AC_TYPE_SIZE_T])dnl
AC_REQUIRE([AC_FUNC_ALLOCA])dnl
AC_REQUIRE([AC_FUNC_MMAP])dnl
AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
unistd.h values.h sys/param.h])
AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
__argz_count __argz_stringify __argz_next])
if test "${ac_cv_func_stpcpy+set}" != "set"; then
AC_CHECK_FUNCS(stpcpy)
fi
if test "${ac_cv_func_stpcpy}" = "yes"; then
AC_DEFINE(HAVE_STPCPY)
fi
AM_LC_MESSAGES
AM_WITH_NLS
if test "x$CATOBJEXT" != "x"; then
if test "x$ALL_LINGUAS" = "x"; then
LINGUAS=
else
AC_MSG_CHECKING(for catalogs to be installed)
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
*$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
esac
done
LINGUAS=$NEW_LINGUAS
AC_MSG_RESULT($LINGUAS)
fi
dnl Construct list of names of catalog files to be constructed.
if test -n "$LINGUAS"; then
for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
fi
fi
dnl The reference to <locale.h> in the installed <libintl.h> file
dnl must be resolved because we cannot expect the users of this
dnl to define HAVE_LOCALE_H.
if test $ac_cv_header_locale_h = yes; then
INCLUDE_LOCALE_H="#include <locale.h>"
else
INCLUDE_LOCALE_H="\
/* The system does not provide the header <locale.h>. Take care yourself. */"
fi
AC_SUBST(INCLUDE_LOCALE_H)
dnl Determine which catalog format we have (if any is needed)
dnl For now we know about two different formats:
dnl Linux libc-5 and the normal X/Open format
test -d intl || mkdir intl
if test "$CATOBJEXT" = ".cat"; then
AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
dnl Transform the SED scripts while copying because some dumb SEDs
dnl cannot handle comments.
sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
fi
dnl po2tbl.sed is always needed.
sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
$srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed
dnl In the intl/Makefile.in we have a special dependency which makes
dnl only sense for gettext. We comment this out for non-gettext
dnl packages.
if test "$PACKAGE" = "gettext"; then
GT_NO="#NO#"
GT_YES=
else
GT_NO=
GT_YES="#YES#"
fi
AC_SUBST(GT_NO)
AC_SUBST(GT_YES)
dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
dnl Try to locate is.
MKINSTALLDIRS=
if test -n "$ac_aux_dir"; then
MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
fi
if test -z "$MKINSTALLDIRS"; then
MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
fi
AC_SUBST(MKINSTALLDIRS)
dnl *** For now the libtool support in intl/Makefile is not for real.
l=
AC_SUBST(l)
dnl Generate list of files to be processed by xgettext which will
dnl be included in po/Makefile.
test -d po || mkdir po
if test "x$srcdir" != "x."; then
if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
posrcprefix="$srcdir/"
else
posrcprefix="../$srcdir/"
fi
else
posrcprefix="../"
fi
rm -f po/POTFILES
sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
< $srcdir/po/POTFILES.in > po/POTFILES
])
AC_DEFUN(AM_HDR_SIGACTION,
[AC_CACHE_CHECK([for sigaction.h], am_cv_hdr_sigaction,
[AC_TRY_LINK([#include <sigaction.h>],
[int i = 0;],
am_cv_hdr_sigaction=yes,
am_cv_hdr_sigaction=no)])
if test $am_cv_hdr_sigaction = yes; then
AC_DEFINE(HAVE_SIGACTION_H)
fi
])
AC_DEFUN(AM_HDR_SIGSET,
[AC_CACHE_CHECK([for sigset.h], am_cv_hdr_sigset,
[AC_TRY_LINK([#include <sigset.h>],
[int i = 0;],
am_cv_hdr_sigset=yes,
am_cv_hdr_sigset=no)])
if test $am_cv_hdr_sigset = yes; then
AC_DEFINE(HAVE_SIGSET_H)
fi
])
kftp-0.4.0/aclocal.m4 644 1750 1750 120650 6667326355 7526 dnl aclocal.m4 generated automatically by aclocal 1.3
dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
dnl This Makefile.in is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
dnl This program is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
dnl PARTICULAR PURPOSE.
# progtest.m4 from gettext 0.32
# Search path for a program which passes the given test.
# Ulrich Drepper <drepper@cygnus.com>, 1996.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 1
dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
AC_DEFUN(AM_PATH_PROG_WITH_TEST,
[# Extract the first word of "$2", so it can be a program name with args.
set dummy $2; ac_word=[$]2
AC_MSG_CHECKING([for $ac_word])
AC_CACHE_VAL(ac_cv_path_$1,
[case "[$]$1" in
/*)
ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in ifelse([$5], , $PATH, [$5]); do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if [$3]; then
ac_cv_path_$1="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
dnl If no 4th arg is given, leave the cache variable unset,
dnl so AC_PATH_PROGS will keep looking.
ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
])dnl
;;
esac])dnl
$1="$ac_cv_path_$1"
if test -n "[$]$1"; then
AC_MSG_RESULT([$]$1)
else
AC_MSG_RESULT(no)
fi
AC_SUBST($1)dnl
])
# lcmessage.m4 from gettext 0.32
# Check whether LC_MESSAGES is available in <locale.h>.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 1
AC_DEFUN(AM_LC_MESSAGES,
[if test $ac_cv_header_locale_h = yes; then
AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
[AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
if test $am_cv_val_LC_MESSAGES = yes; then
AC_DEFINE(HAVE_LC_MESSAGES)
fi
fi])
# gettext.m4 from gettext 0.32
# Macro to add for using GNU gettext.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 3
AC_DEFUN(AM_WITH_NLS,
[AC_MSG_CHECKING([whether NLS is requested])
dnl Default is enabled NLS
AC_ARG_ENABLE(nls,
[ --disable-nls do not use Native Language Support],
USE_NLS=$enableval, USE_NLS=yes)
AC_MSG_RESULT($USE_NLS)
AC_SUBST(USE_NLS)
USE_INCLUDED_LIBINTL=no
dnl If we use NLS figure out what method
if test "$USE_NLS" = "yes"; then
AC_DEFINE(ENABLE_NLS)
AC_MSG_CHECKING([whether included gettext is requested])
AC_ARG_WITH(included-gettext,
[ --with-included-gettext use the GNU gettext library included here],
nls_cv_force_use_gnu_gettext=$withval,
nls_cv_force_use_gnu_gettext=no)
AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
dnl User does not insist on using GNU NLS library. Figure out what
dnl to use. If gettext or catgets are available (in this order) we
dnl use this. Else we have to fall back to GNU NLS library.
dnl catgets is only used if permitted by option --with-catgets.
nls_cv_header_intl=
nls_cv_header_libgt=
CATOBJEXT=NONE
AC_CHECK_HEADER(libintl.h,
[AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
[AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
if test "$gt_cv_func_gettext_libc" != "yes"; then
AC_CHECK_LIB(intl, bindtextdomain,
[AC_CACHE_CHECK([for gettext in libintl],
gt_cv_func_gettext_libintl,
[AC_TRY_LINK([], [return (int) gettext ("")],
gt_cv_func_gettext_libintl=yes,
gt_cv_func_gettext_libintl=no)])])
fi
if test "$gt_cv_func_gettext_libc" = "yes" \
|| test "$gt_cv_func_gettext_libintl" = "yes"; then
AC_DEFINE(HAVE_GETTEXT)
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
if test "$MSGFMT" != "no"; then
AC_CHECK_FUNCS(dcgettext)
AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
return _nl_msg_cat_cntr],
[CATOBJEXT=.gmo
DATADIRNAME=share],
[CATOBJEXT=.mo
DATADIRNAME=lib])
INSTOBJEXT=.mo
fi
fi
])
if test "$CATOBJEXT" = "NONE"; then
AC_MSG_CHECKING([whether catgets can be used])
AC_ARG_WITH(catgets,
[ --with-catgets use catgets functions if available],
nls_cv_use_catgets=$withval, nls_cv_use_catgets=no)
AC_MSG_RESULT($nls_cv_use_catgets)
if test "$nls_cv_use_catgets" = "yes"; then
dnl No gettext in C library. Try catgets next.
AC_CHECK_LIB(i, main)
AC_CHECK_FUNC(catgets,
[AC_DEFINE(HAVE_CATGETS)
INTLOBJS="\$(CATOBJS)"
AC_PATH_PROG(GENCAT, gencat, no)dnl
if test "$GENCAT" != "no"; then
AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
if test "$GMSGFMT" = "no"; then
AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
fi
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
USE_INCLUDED_LIBINTL=yes
CATOBJEXT=.cat
INSTOBJEXT=.cat
DATADIRNAME=lib
INTLDEPS='$(top_builddir)/intl/libintl.a'
INTLLIBS=$INTLDEPS
LIBS=`echo $LIBS | sed -e 's/-lintl//'`
nls_cv_header_intl=intl/libintl.h
nls_cv_header_libgt=intl/libgettext.h
fi])
fi
fi
if test "$CATOBJEXT" = "NONE"; then
dnl Neither gettext nor catgets in included in the C library.
dnl Fall back on GNU gettext library.
nls_cv_use_gnu_gettext=yes
fi
fi
if test "$nls_cv_use_gnu_gettext" = "yes"; then
dnl Mark actions used to generate GNU NLS library.
INTLOBJS="\$(GETTOBJS)"
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
AC_SUBST(MSGFMT)
USE_INCLUDED_LIBINTL=yes
CATOBJEXT=.gmo
INSTOBJEXT=.mo
DATADIRNAME=share
INTLDEPS='$(top_builddir)/intl/libintl.a'
INTLLIBS=$INTLDEPS
LIBS=`echo $LIBS | sed -e 's/-lintl//'`
nls_cv_header_intl=intl/libintl.h
nls_cv_header_libgt=intl/libgettext.h
fi
dnl Test whether we really found GNU xgettext.
if test "$XGETTEXT" != ":"; then
dnl If it is no GNU xgettext we define it as : so that the
dnl Makefiles still can work.
if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
: ;
else
AC_MSG_RESULT(
[found xgettext programs is not GNU xgettext; ignore it])
XGETTEXT=":"
fi
fi
# We need to process the po/ directory.
POSUB=po
else
DATADIRNAME=share
nls_cv_header_intl=intl/libintl.h
nls_cv_header_libgt=intl/libgettext.h
fi
# If this is used in GNU gettext we have to set USE_NLS to `yes'
# because some of the sources are only built for this goal.
if test "$PACKAGE" = gettext; then
USE_NLS=yes
USE_INCLUDED_LIBINTL=yes
fi
dnl These rules are solely for the distribution goal. While doing this
dnl we only have to keep exactly one list of the available catalogs
dnl in configure.in.
for lang in $ALL_LINGUAS; do
GMOFILES="$GMOFILES $lang.gmo"
POFILES="$POFILES $lang.po"
done
dnl Make all variables we use known to autoconf.
AC_SUBST(USE_INCLUDED_LIBINTL)
AC_SUBST(CATALOGS)
AC_SUBST(CATOBJEXT)
AC_SUBST(DATADIRNAME)
AC_SUBST(GMOFILES)
AC_SUBST(INSTOBJEXT)
AC_SUBST(INTLDEPS)
AC_SUBST(INTLLIBS)
AC_SUBST(INTLOBJS)
AC_SUBST(POFILES)
AC_SUBST(POSUB)
])
AC_DEFUN(AM_GNU_GETTEXT,
[AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_ISC_POSIX])dnl
AC_REQUIRE([AC_HEADER_STDC])dnl
AC_REQUIRE([AC_C_CONST])dnl
AC_REQUIRE([AC_C_INLINE])dnl
AC_REQUIRE([AC_TYPE_OFF_T])dnl
AC_REQUIRE([AC_TYPE_SIZE_T])dnl
AC_REQUIRE([AC_FUNC_ALLOCA])dnl
AC_REQUIRE([AC_FUNC_MMAP])dnl
AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
unistd.h values.h sys/param.h])
AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
__argz_count __argz_stringify __argz_next])
if test "${ac_cv_func_stpcpy+set}" != "set"; then
AC_CHECK_FUNCS(stpcpy)
fi
if test "${ac_cv_func_stpcpy}" = "yes"; then
AC_DEFINE(HAVE_STPCPY)
fi
AM_LC_MESSAGES
AM_WITH_NLS
if test "x$CATOBJEXT" != "x"; then
if test "x$ALL_LINGUAS" = "x"; then
LINGUAS=
else
AC_MSG_CHECKING(for catalogs to be installed)
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
*$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
esac
done
LINGUAS=$NEW_LINGUAS
AC_MSG_RESULT($LINGUAS)
fi
dnl Construct list of names of catalog files to be constructed.
if test -n "$LINGUAS"; then
for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
fi
fi
dnl The reference to <locale.h> in the installed <libintl.h> file
dnl must be resolved because we cannot expect the users of this
dnl to define HAVE_LOCALE_H.
if test $ac_cv_header_locale_h = yes; then
INCLUDE_LOCALE_H="#include <locale.h>"
else
INCLUDE_LOCALE_H="\
/* The system does not provide the header <locale.h>. Take care yourself. */"
fi
AC_SUBST(INCLUDE_LOCALE_H)
dnl Determine which catalog format we have (if any is needed)
dnl For now we know about two different formats:
dnl Linux libc-5 and the normal X/Open format
test -d intl || mkdir intl
if test "$CATOBJEXT" = ".cat"; then
AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
dnl Transform the SED scripts while copying because some dumb SEDs
dnl cannot handle comments.
sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
fi
dnl po2tbl.sed is always needed.
sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
$srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed
dnl In the intl/Makefile.in we have a special dependency which makes
dnl only sense for gettext. We comment this out for non-gettext
dnl packages.
if test "$PACKAGE" = "gettext"; then
GT_NO="#NO#"
GT_YES=
else
GT_NO=
GT_YES="#YES#"
fi
AC_SUBST(GT_NO)
AC_SUBST(GT_YES)
dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
dnl Try to locate is.
MKINSTALLDIRS=
if test -n "$ac_aux_dir"; then
MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
fi
if test -z "$MKINSTALLDIRS"; then
MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
fi
AC_SUBST(MKINSTALLDIRS)
dnl *** For now the libtool support in intl/Makefile is not for real.
l=
AC_SUBST(l)
dnl Generate list of files to be processed by xgettext which will
dnl be included in po/Makefile.
test -d po || mkdir po
if test "x$srcdir" != "x."; then
if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
posrcprefix="$srcdir/"
else
posrcprefix="../$srcdir/"
fi
else
posrcprefix="../"
fi
rm -f po/POTFILES
sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
< $srcdir/po/POTFILES.in > po/POTFILES
])
AC_DEFUN(AM_HDR_SIGACTION,
[AC_CACHE_CHECK([for sigaction.h], am_cv_hdr_sigaction,
[AC_TRY_LINK([#include <sigaction.h>],
[int i = 0;],
am_cv_hdr_sigaction=yes,
am_cv_hdr_sigaction=no)])
if test $am_cv_hdr_sigaction = yes; then
AC_DEFINE(HAVE_SIGACTION_H)
fi
])
AC_DEFUN(AM_HDR_SIGSET,
[AC_CACHE_CHECK([for sigset.h], am_cv_hdr_sigset,
[AC_TRY_LINK([#include <sigset.h>],
[int i = 0;],
am_cv_hdr_sigset=yes,
am_cv_hdr_sigset=no)])
if test $am_cv_hdr_sigset = yes; then
AC_DEFINE(HAVE_SIGSET_H)
fi
])
# Like AC_CONFIG_HEADER, but automatically create stamp file.
AC_DEFUN(AM_CONFIG_HEADER,
[AC_PREREQ([2.12])
AC_CONFIG_HEADER([$1])
dnl When config.status generates a header, we must update the stamp-h file.
dnl This file resides in the same directory as the config header
dnl that is generated. We must strip everything past the first ":",
dnl and everything past the last "/".
AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
<<am_indx=1
for am_file in <<$1>>; do
case " <<$>>CONFIG_HEADERS " in
*" <<$>>am_file "*<<)>>
echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
;;
esac
am_indx=`expr "<<$>>am_indx" + 1`
done<<>>dnl>>)
changequote([,]))])
# Do all the work for Automake. This macro actually does too much --
# some checks are only needed if your package does certain things.
# But this isn't really a big deal.
# serial 1
dnl Usage:
dnl AM_INIT_AUTOMAKE(package,version, [no-define])
AC_DEFUN(AM_INIT_AUTOMAKE,
[AC_REQUIRE([AM_PROG_INSTALL])
PACKAGE=[$1]
AC_SUBST(PACKAGE)
VERSION=[$2]
AC_SUBST(VERSION)
dnl test to see if srcdir already configured
if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
ifelse([$3],,
AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE")
AC_DEFINE_UNQUOTED(VERSION, "$VERSION"))
AC_REQUIRE([AM_SANITY_CHECK])
AC_REQUIRE([AC_ARG_PROGRAM])
dnl FIXME This is truly gross.
missing_dir=`cd $ac_aux_dir && pwd`
AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
AC_REQUIRE([AC_PROG_MAKE_SET])])
# serial 1
AC_DEFUN(AM_PROG_INSTALL,
[AC_REQUIRE([AC_PROG_INSTALL])
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
AC_SUBST(INSTALL_SCRIPT)dnl
])
#
# Check to make sure that the build environment is sane.
#
AC_DEFUN(AM_SANITY_CHECK,
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
echo timestamp > conftestfile
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
if test "[$]*" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftestfile`
fi
if test "[$]*" != "X $srcdir/configure conftestfile" \
&& test "[$]*" != "X conftestfile $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
alias in your environment])
fi
test "[$]2" = conftestfile
)
then
# Ok.
:
else
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
rm -f conftest*
AC_MSG_RESULT(yes)])
dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
dnl The program must properly implement --version.
AC_DEFUN(AM_MISSING_PROG,
[AC_MSG_CHECKING(for working $2)
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if ($2 --version) < /dev/null > /dev/null 2>&1; then
$1=$2
AC_MSG_RESULT(found)
else
$1="$3/missing $2"
AC_MSG_RESULT(missing)
fi
AC_SUBST($1)])
# Add --enable-maintainer-mode option to configure.
# From Jim Meyering
# serial 1
AC_DEFUN(AM_MAINTAINER_MODE,
[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
dnl maintainer-mode is disabled by default
AC_ARG_ENABLE(maintainer-mode,
[ --enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer],
USE_MAINTAINER_MODE=$enableval,
USE_MAINTAINER_MODE=no)
AC_MSG_RESULT($USE_MAINTAINER_MODE)
if test $USE_MAINTAINER_MODE = yes; then
MAINT=
else
MAINT='#M#'
fi
AC_SUBST(MAINT)dnl
]
)
# aclocal-include.m4
#
# This macro adds the name macrodir to the set of directories
# that `aclocal' searches for macros.
# serial 1
dnl AM_ACLOCAL_INCLUDE(macrodir)
AC_DEFUN([AM_ACLOCAL_INCLUDE],
[for k in $1 ; do ACLOCAL="$ACLOCAL -I $k" ; done])
dnl
dnl GNOME_INIT_HOOK (script-if-gnome-enabled, failflag)
dnl
dnl if failflag is "fail" then GNOME_INIT_HOOK will abort if gnomeConf.sh
dnl is not found.
dnl
AC_DEFUN([GNOME_INIT_HOOK],
[
AC_SUBST(GNOME_LIBS)
AC_SUBST(GNOMEUI_LIBS)
AC_SUBST(GNOMEGNORBA_LIBS)
AC_SUBST(GTKXMHTML_LIBS)
AC_SUBST(GNOME_APPLET_LIBS)
AC_SUBST(GNOME_LIBDIR)
AC_SUBST(GNOME_INCLUDEDIR)
AC_ARG_WITH(gnome-includes,
[ --with-gnome-includes Specify location of GNOME headers],[
CFLAGS="$CFLAGS -I$withval"
])
AC_ARG_WITH(gnome-libs,
[ --with-gnome-libs Specify location of GNOME libs],[
LDFLAGS="$LDFLAGS -L$withval"
gnome_prefix=$withval
])
AC_ARG_WITH(gnome,
[ --with-gnome Specify prefix for GNOME files],
if test x$withval = xyes; then
want_gnome=yes
dnl Note that an empty true branch is not
dnl valid sh syntax.
ifelse([$1], [], :, [$1])
else
if test "x$withval" = xno; then
want_gnome=no
else
want_gnome=yes
LDFLAGS="$LDFLAGS -L$withval/lib"
CFLAGS="$CFLAGS -I$withval/include"
gnome_prefix=$withval/lib
fi
fi,
want_gnome=yes)
if test "x$want_gnome" = xyes; then
AC_PATH_PROG(GNOME_CONFIG,gnome-config,no)
if test "$GNOME_CONFIG" = "no"; then
no_gnome_config="yes"
else
AC_MSG_CHECKING(if $GNOME_CONFIG works)
if $GNOME_CONFIG --libs-only-l gnome >/dev/null 2>&1; then
AC_MSG_RESULT(yes)
GNOME_GNORBA_HOOK([],$2)
GNOME_LIBS="`$GNOME_CONFIG --libs-only-l gnome`"
GNOMEUI_LIBS="`$GNOME_CONFIG --libs-only-l gnomeui`"
GNOMEGNORBA_LIBS="`$GNOME_CONFIG --libs-only-l gnorba gnomeui`"
GTKXMHTML_LIBS="`$GNOME_CONFIG --libs-only-l gtkxmhtml`"
GNOME_APPLET_LIBS="`$GNOME_CONFIG --libs-only-l applets`"
GNOME_LIBDIR="`$GNOME_CONFIG --libs-only-L gnorba gnomeui`"
GNOME_INCLUDEDIR="`$GNOME_CONFIG --cflags gnorba gnomeui`"
$1
else
AC_MSG_RESULT(no)
no_gnome_config="yes"
fi
fi
if test x$exec_prefix = xNONE; then
if test x$prefix = xNONE; then
gnome_prefix=$ac_default_prefix/lib
else
gnome_prefix=$prefix/lib
fi
else
gnome_prefix=`eval echo \`echo $libdir\``
fi
if test "$no_gnome_config" = "yes"; then
AC_MSG_CHECKING(for gnomeConf.sh file in $gnome_prefix)
if test -f $gnome_prefix/gnomeConf.sh; then
AC_MSG_RESULT(found)
echo "loading gnome configuration from" \
"$gnome_prefix/gnomeConf.sh"
. $gnome_prefix/gnomeConf.sh
$1
else
AC_MSG_RESULT(not found)
if test x$2 = xfail; then
AC_MSG_ERROR(Could not find the gnomeConf.sh file that is generated by gnome-libs install)
fi
fi
fi
fi
])
AC_DEFUN([GNOME_INIT],[
GNOME_INIT_HOOK([],fail)
])
dnl
dnl GNOME_GNORBA_HOOK (script-if-gnorba-found, failflag)
dnl
dnl if failflag is "failure" it aborts if gnorba is not found.
dnl
AC_DEFUN([GNOME_GNORBA_HOOK],[
GNOME_ORBIT_HOOK([],$2)
AC_CACHE_CHECK([for gnorba libraries],gnome_cv_gnorba_found,[
gnome_cv_gnorba_found=no
if test x$gnome_cv_orbit_found = xyes; then
GNORBA_CFLAGS="`gnome-config --cflags gnorba gnomeui`"
GNORBA_LIBS="`gnome-config --libs gnorba gnomeui`"
if test -n "$GNORBA_LIBS"; then
gnome_cv_gnorba_found=yes
fi
fi
])
AM_CONDITIONAL(HAVE_GNORBA, test x$gnome_cv_gnorba_found = xyes)
if test x$gnome_cv_orbit_found = xyes; then
$1
GNORBA_CFLAGS="`gnome-config --cflags gnorba gnomeui`"
GNORBA_LIBS="`gnome-config --libs gnorba gnomeui`"
AC_SUBST(GNORBA_CFLAGS)
AC_SUBST(GNORBA_LIBS)
else
if test x$2 = xfailure; then
AC_MSG_ERROR(gnorba library not installed or installation problem)
fi
fi
])
AC_DEFUN([GNOME_GNORBA_CHECK], [
GNOME_GNORBA_HOOK([],failure)
])
dnl
dnl GNOME_ORBIT_HOOK (script-if-orbit-found, failflag)
dnl
dnl if failflag is "failure" it aborts if orbit is not found.
dnl
AC_DEFUN([GNOME_ORBIT_HOOK],[
AC_PATH_PROG(ORBIT_CONFIG,orbit-config,no)
AC_PATH_PROG(ORBIT_IDL,orbit-idl,no)
AC_CACHE_CHECK([for working ORBit environment],gnome_cv_orbit_found,[
if test x$ORBIT_CONFIG = xno -o x$ORBIT_IDL = xno; then
gnome_cv_orbit_found=no
else
gnome_cv_orbit_found=yes
fi
])
AM_CONDITIONAL(HAVE_ORBIT, test x$gnome_cv_orbit_found = xyes)
if test x$gnome_cv_orbit_found = xyes; then
$1
ORBIT_CFLAGS=`orbit-config --cflags client server`
ORBIT_LIBS=`orbit-config --use-service=name --libs client server`
AC_SUBST(ORBIT_CFLAGS)
AC_SUBST(ORBIT_LIBS)
else
if test x$2 = xfailure; then
AC_MSG_ERROR(ORBit not installed or installation problem)
fi
fi
])
AC_DEFUN([GNOME_ORBIT_CHECK], [
GNOME_ORBIT_HOOK([],failure)
])
# Define a conditional.
AC_DEFUN(AM_CONDITIONAL,
[AC_SUBST($1_TRUE)
AC_SUBST($1_FALSE)
if $2; then
$1_TRUE=
$1_FALSE='#'
else
$1_TRUE='#'
$1_FALSE=
fi])
# serial 24 AM_PROG_LIBTOOL
AC_DEFUN(AM_PROG_LIBTOOL,
[AC_REQUIRE([AM_ENABLE_SHARED])dnl
AC_REQUIRE([AM_ENABLE_STATIC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AM_PROG_LD])dnl
AC_REQUIRE([AM_PROG_NM])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl
# Check for any special flags to pass to ltconfig.
libtool_flags=
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$host" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
CFLAGS="$CFLAGS -belf"
;;
esac
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| AC_MSG_ERROR([libtool configure failed])
])
# AM_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AM_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AM_ENABLE_SHARED,
[define([AM_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared build shared libraries [default=>>AM_ENABLE_SHARED_DEFAULT]
changequote([, ])dnl
[ --enable-shared=PKGS only build shared libraries if the current package
appears as an element in the PKGS list],
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_shared=AM_ENABLE_SHARED_DEFAULT)dnl
])
# AM_DISABLE_SHARED - set the default shared flag to --disable-shared
AC_DEFUN(AM_DISABLE_SHARED,
[AM_ENABLE_SHARED(no)])
# AM_DISABLE_STATIC - set the default static flag to --disable-static
AC_DEFUN(AM_DISABLE_STATIC,
[AM_ENABLE_STATIC(no)])
# AM_ENABLE_STATIC - implement the --enable-static flag
# Usage: AM_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AM_ENABLE_STATIC,
[define([AM_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static build static libraries [default=>>AM_ENABLE_STATIC_DEFAULT]
changequote([, ])dnl
[ --enable-static=PKGS only build shared libraries if the current package
appears as an element in the PKGS list],
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_static=AM_ENABLE_STATIC_DEFAULT)dnl
])
# AM_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AM_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
/* | [A-Za-z]:\\*)
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
else
ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$ac_cv_path_LD"
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_SUBST(LD)
AM_PROG_LD_GNU
])
AC_DEFUN(AM_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
ac_cv_prog_gnu_ld=yes
else
ac_cv_prog_gnu_ld=no
fi])
])
# AM_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN(AM_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
[case "$NM" in
/* | [A-Za-z]:\\*)
ac_cv_path_NM="$NM" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -B"
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -p"
else
ac_cv_path_NM="$ac_dir/nm"
fi
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
;;
esac])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
AC_SUBST(NM)
])
dnl GNOME_X_CHECKS
dnl
dnl Basic X11 related checks for X11. At the end, the following will be
dnl defined/changed:
dnl GTK_{CFLAGS,LIBS} From AM_PATH_GTK
dnl CPPFLAGS Will include $X_CFLAGS
dnl GNOME_HAVE_SM `true' or `false' depending on whether session
dnl management is available. It is available if
dnl both -lSM and X11/SM/SMlib.h exist. (Some
dnl Solaris boxes have the library but not the header)
dnl XPM_LIBS -lXpm if Xpm library is present, otherwise ""
dnl
dnl The following configure cache variables are defined (but not used):
dnl gnome_cv_passdown_{x_libs,X_LIBS,X_CFLAGS}
dnl
AC_DEFUN([GNOME_X_CHECKS],
[
AM_PATH_GTK(1.1.12,,AC_MSG_ERROR(GTK not installed, or gtk-config not in path))
dnl Hope that GTK_CFLAGS have only -I and -D. Otherwise, we could
dnl test -z "$x_includes" || CPPFLAGS="$CPPFLAGS -I$x_includes"
dnl
dnl Use CPPFLAGS instead of CFLAGS because AC_CHECK_HEADERS uses
dnl CPPFLAGS, not CFLAGS
CPPFLAGS="$CPPFLAGS $GTK_CFLAGS"
saved_ldflags="$LDFLAGS"
LDFLAGS="$LDFLAGS $GTK_LIBS"
gnome_cv_passdown_x_libs="$GTK_LIBS"
gnome_cv_passdown_X_LIBS="$GTK_LIBS"
gnome_cv_passdown_X_CFLAGS="$GTK_CFLAGS"
gnome_cv_passdown_GTK_LIBS="$GTK_LIBS"
LDFLAGS="$saved_ldflags $GTK_LIBS"
dnl We are requiring GTK >= 1.1.1, which means this will be fine anyhow.
USE_DEVGTK=true
dnl AC_MSG_CHECKING([whether to use features from (unstable) GTK+ 1.1.x])
dnl AC_EGREP_CPP(answer_affirmatively,
dnl [#include <gtk/gtkfeatures.h>
dnl #ifdef GTK_HAVE_FEATURES_1_1_0
dnl answer_affirmatively
dnl #endif
dnl ], dev_gtk=yes, dev_gtk=no)
dnl if test "$dev_gtk" = "yes"; then
dnl USE_DEVGTK=true
dnl fi
dnl AC_MSG_RESULT("$dev_gtk")
GNOME_HAVE_SM=true
case "$GTK_LIBS" in
*-lSM*)
dnl Already found it.
;;
*)
dnl Assume that if we have -lSM then we also have -lICE.
AC_CHECK_LIB(SM, SmcSaveYourselfDone,
[GTK_LIBS="-lSM -lICE $GTK_LIBS"],GNOME_HAVE_SM=false,
$x_libs -lICE)
;;
esac
if test "$GNOME_HAVE_SM" = true; then
AC_CHECK_HEADERS(X11/SM/SMlib.h,,GNOME_HAVE_SM=false)
fi
if test "$GNOME_HAVE_SM" = true; then
AC_DEFINE(HAVE_LIBSM)
fi
XPM_LIBS=""
AC_CHECK_LIB(Xpm, XpmFreeXpmImage, [XPM_LIBS="-lXpm"], , $x_libs)
AC_SUBST(XPM_LIBS)
AC_REQUIRE([GNOME_PTHREAD_CHECK])
LDFLAGS="$saved_ldflags"
AC_PROVIDE([GNOME_X_CHECKS])
])
# Configure paths for GTK+
# Owen Taylor 97-11-3
dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS
dnl
AC_DEFUN(AM_PATH_GTK,
[dnl
dnl Get the cflags and libraries from the gtk-config script
dnl
AC_ARG_WITH(gtk-prefix,[ --with-gtk-prefix=PFX Prefix where GTK is installed (optional)],
gtk_config_prefix="$withval", gtk_config_prefix="")
AC_ARG_WITH(gtk-exec-prefix,[ --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)],
gtk_config_exec_prefix="$withval", gtk_config_exec_prefix="")
AC_ARG_ENABLE(gtktest, [ --disable-gtktest Do not try to compile and run a test GTK program],
, enable_gtktest=yes)
if test x$gtk_config_exec_prefix != x ; then
gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
if test x${GTK_CONFIG+set} != xset ; then
GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
fi
fi
if test x$gtk_config_prefix != x ; then
gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
if test x${GTK_CONFIG+set} != xset ; then
GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
fi
fi
AC_PATH_PROG(GTK_CONFIG, gtk-config, no)
min_gtk_version=ifelse([$1], ,0.99.7,$1)
AC_MSG_CHECKING(for GTK - version >= $min_gtk_version)
no_gtk=""
if test "$GTK_CONFIG" = "no" ; then
no_gtk=yes
else
GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
if test "x$enable_gtktest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$GTK_LIBS $LIBS"
dnl
dnl Now check if the installed GTK is sufficiently new. (Also sanity
dnl checks the results of gtk-config to some extent
dnl
rm -f conf.gtktest
AC_TRY_RUN([
#include <gtk/gtk.h>
#include <stdio.h>
#include <stdlib.h>
int
main ()
{
int major, minor, micro;
char *tmp_version;
system ("touch conf.gtktest");
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = g_strdup("$min_gtk_version");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
printf("%s, bad version string\n", "$min_gtk_version");
exit(1);
}
if ((gtk_major_version != $gtk_config_major_version) ||
(gtk_minor_version != $gtk_config_minor_version) ||
(gtk_micro_version != $gtk_config_micro_version))
{
printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
$gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
gtk_major_version, gtk_minor_version, gtk_micro_version);
printf ("*** was found! If gtk-config was correct, then it is best\n");
printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
printf("*** required on your system.\n");
printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
printf("*** before re-running configure\n");
}
#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
(gtk_minor_version != GTK_MINOR_VERSION) ||
(gtk_micro_version != GTK_MICRO_VERSION))
{
printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
printf("*** library (version %d.%d.%d)\n",
gtk_major_version, gtk_minor_version, gtk_micro_version);
}
#endif /* defined (GTK_MAJOR_VERSION) ... */
else
{
if ((gtk_major_version > major) ||
((gtk_major_version == major) && (gtk_minor_version > minor)) ||
((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
{
return 0;
}
else
{
printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
gtk_major_version, gtk_minor_version, gtk_micro_version);
printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
major, minor, micro);
printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
printf("***\n");
printf("*** If you have already installed a sufficiently new version, this error\n");
printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
printf("*** being found. The easiest way to fix this is to remove the old version\n");
printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
printf("*** correct copy of gtk-config. (In this case, you will have to\n");
printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
printf("*** so that the correct libraries are found at run-time))\n");
}
}
return 1;
}
],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_gtk" = x ; then
AC_MSG_RESULT(yes)
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "$GTK_CONFIG" = "no" ; then
echo "*** The gtk-config script installed by GTK could not be found"
echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the GTK_CONFIG environment variable to the"
echo "*** full path to gtk-config."
else
if test -f conf.gtktest ; then
:
else
echo "*** Could not run GTK test program, checking why..."
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$LIBS $GTK_LIBS"
AC_TRY_LINK([
#include <gtk/gtk.h>
#include <stdio.h>
], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding GTK or finding the wrong"
echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
echo "***"
echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
echo "*** came with the system with the command"
echo "***"
echo "*** rpm --erase --nodeps gtk gtk-devel" ],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means GTK was incorrectly installed"
echo "*** or that you have moved GTK since it was installed. In the latter case, you"
echo "*** may want to edit the gtk-config script: $GTK_CONFIG" ])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
GTK_CFLAGS=""
GTK_LIBS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(GTK_CFLAGS)
AC_SUBST(GTK_LIBS)
rm -f conf.gtktest
])
AC_DEFUN([GNOME_PTHREAD_CHECK],[
PTHREAD_LIB=""
AC_CHECK_LIB(pthread, pthread_create, PTHREAD_LIB="-lpthread",
[AC_CHECK_LIB(c_r, pthread_create, PTHREAD_LIB="-lc_r")])
AC_SUBST(PTHREAD_LIB)
AC_PROVIDE([GNOME_PTHREAD_CHECK])
])
kftp-0.4.0/config.guess 755 0 0 65411 6657733656 10004 #! /bin/sh
# Attempt to guess a canonical system name.
# Copyright (C) 1992, 93, 94, 95, 96, 97, 1998 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Written by Per Bothner <bothner@cygnus.com>.
# The master version of this file is at the FSF in /home/gd/gnu/lib.
# Please send patches to the Autoconf mailing list <autoconf@gnu.org>.
#
# This script attempts to guess a canonical system name similar to
# config.sub. If it succeeds, it prints the system name on stdout, and
# exits with 0. Otherwise, it exits with 1.
#
# The plan is that this can be called by configure scripts if you
# don't specify an explicit system type (host/target name).
#
# Only a few systems have been added to this list; please add others
# (but try to keep the structure clean).
#
# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# (ghazi@noc.rutgers.edu 8/24/94.)
if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
PATH=$PATH:/.attbin ; export PATH
fi
UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
dummy=dummy-$$
trap 'rm -f $dummy.c $dummy.o $dummy; exit 1' 1 2 15
# Note: order is significant - the case branches are not exclusive.
case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
alpha:OSF1:*:*)
if test $UNAME_RELEASE = "V4.0"; then
UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
fi
# A Vn.n version is a released version.
# A Tn.n version is a released field test version.
# A Xn.n version is an unreleased experimental baselevel.
# 1.2 uses "1.2" for uname -r.
cat <<EOF >$dummy.s
.globl main
.ent main
main:
.frame \$30,0,\$26,0
.prologue 0
.long 0x47e03d80 # implver $0
lda \$2,259
.long 0x47e20c21 # amask $2,$1
srl \$1,8,\$2
sll \$2,2,\$2
sll \$0,3,\$0
addl \$1,\$0,\$0
addl \$2,\$0,\$0
ret \$31,(\$26),1
.end main
EOF
${CC-cc} $dummy.s -o $dummy 2>/dev/null
if test "$?" = 0 ; then
./$dummy
case "$?" in
7)
UNAME_MACHINE="alpha"
;;
15)
UNAME_MACHINE="alphaev5"
;;
14)
UNAME_MACHINE="alphaev56"
;;
10)
UNAME_MACHINE="alphapca56"
;;
16)
UNAME_MACHINE="alphaev6"
;;
esac
fi
rm -f $dummy.s $dummy
echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr [[A-Z]] [[a-z]]`
exit 0 ;;
21064:Windows_NT:50:3)
echo alpha-dec-winnt3.5
exit 0 ;;
Amiga*:UNIX_System_V:4.0:*)
echo m68k-cbm-sysv4
exit 0;;
amiga:NetBSD:*:*)
echo m68k-cbm-netbsd${UNAME_RELEASE}
exit 0 ;;
amiga:OpenBSD:*:*)
echo m68k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
*:[Aa]miga[Oo][Ss]:*:*)
echo ${UNAME_MACHINE}-unknown-amigaos
exit 0 ;;
arc64:OpenBSD:*:*)
echo mips64el-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
arc:OpenBSD:*:*)
echo mipsel-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
hkmips:OpenBSD:*:*)
echo mips-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
pmax:OpenBSD:*:*)
echo mipsel-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
sgi:OpenBSD:*:*)
echo mips-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
wgrisc:OpenBSD:*:*)
echo mipsel-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
echo arm-acorn-riscix${UNAME_RELEASE}
exit 0;;
arm32:NetBSD:*:*)
echo arm-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
exit 0 ;;
SR2?01:HI-UX/MPP:*:*)
echo hppa1.1-hitachi-hiuxmpp
exit 0;;
Pyramid*:OSx*:*:*|MIS*:OSx*:*:*|MIS*:SMP_DC-OSx*:*:*)
# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
if test "`(/bin/universe) 2>/dev/null`" = att ; then
echo pyramid-pyramid-sysv3
else
echo pyramid-pyramid-bsd
fi
exit 0 ;;
NILE*:*:*:dcosx)
echo pyramid-pyramid-svr4
exit 0 ;;
sun4H:SunOS:5.*:*)
echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
i86pc:SunOS:5.*:*)
echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
sun4*:SunOS:6*:*)
# According to config.sub, this is the proper way to canonicalize
# SunOS6. Hard to guess exactly what SunOS6 will be like, but
# it's likely to be more like Solaris than SunOS4.
echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
sun4*:SunOS:*:*)
case "`/usr/bin/arch -k`" in
Series*|S4*)
UNAME_RELEASE=`uname -v`
;;
esac
# Japanese Language versions have a version number like `4.1.3-JL'.
echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
exit 0 ;;
sun3*:SunOS:*:*)
echo m68k-sun-sunos${UNAME_RELEASE}
exit 0 ;;
sun*:*:4.2BSD:*)
UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
case "`/bin/arch`" in
sun3)
echo m68k-sun-sunos${UNAME_RELEASE}
;;
sun4)
echo sparc-sun-sunos${UNAME_RELEASE}
;;
esac
exit 0 ;;
aushp:SunOS:*:*)
echo sparc-auspex-sunos${UNAME_RELEASE}
exit 0 ;;
atari*:NetBSD:*:*)
echo m68k-atari-netbsd${UNAME_RELEASE}
exit 0 ;;
atari*:OpenBSD:*:*)
echo m68k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
sun3*:NetBSD:*:*)
echo m68k-sun-netbsd${UNAME_RELEASE}
exit 0 ;;
sun3*:OpenBSD:*:*)
echo m68k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
mac68k:NetBSD:*:*)
echo m68k-apple-netbsd${UNAME_RELEASE}
exit 0 ;;
mac68k:OpenBSD:*:*)
echo m68k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
mvme68k:OpenBSD:*:*)
echo m68k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
mvme88k:OpenBSD:*:*)
echo m88k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
powerpc:machten:*:*)
echo powerpc-apple-machten${UNAME_RELEASE}
exit 0 ;;
macppc:NetBSD:*:*)
echo powerpc-apple-netbsd${UNAME_RELEASE}
exit 0 ;;
RISC*:Mach:*:*)
echo mips-dec-mach_bsd4.3
exit 0 ;;
RISC*:ULTRIX:*:*)
echo mips-dec-ultrix${UNAME_RELEASE}
exit 0 ;;
VAX*:ULTRIX*:*:*)
echo vax-dec-ultrix${UNAME_RELEASE}
exit 0 ;;
2020:CLIX:*:*)
echo clipper-intergraph-clix${UNAME_RELEASE}
exit 0 ;;
mips:*:*:UMIPS | mips:*:*:RISCos)
sed 's/^ //' << EOF >$dummy.c
int main (argc, argv) int argc; char **argv; {
#if defined (host_mips) && defined (MIPSEB)
#if defined (SYSTYPE_SYSV)
printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
#endif
#if defined (SYSTYPE_SVR4)
printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
#endif
#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
#endif
#endif
exit (-1);
}
EOF
${CC-cc} $dummy.c -o $dummy \
&& ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
&& rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
echo mips-mips-riscos${UNAME_RELEASE}
exit 0 ;;
Night_Hawk:Power_UNIX:*:*)
echo powerpc-harris-powerunix
exit 0 ;;
m88k:CX/UX:7*:*)
echo m88k-harris-cxux7
exit 0 ;;
m88k:*:4*:R4*)
echo m88k-motorola-sysv4
exit 0 ;;
m88k:*:3*:R3*)
echo m88k-motorola-sysv3
exit 0 ;;
AViiON:dgux:*:*)
# DG/UX returns AViiON for all architectures
UNAME_PROCESSOR=`/usr/bin/uname -p`
if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then
if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
-o ${TARGET_BINARY_INTERFACE}x = x ] ; then
echo m88k-dg-dgux${UNAME_RELEASE}
else
echo m88k-dg-dguxbcs${UNAME_RELEASE}
fi
else echo i586-dg-dgux${UNAME_RELEASE}
fi
exit 0 ;;
M88*:DolphinOS:*:*) # DolphinOS (SVR3)
echo m88k-dolphin-sysv3
exit 0 ;;
M88*:*:R3*:*)
# Delta 88k system running SVR3
echo m88k-motorola-sysv3
exit 0 ;;
XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
echo m88k-tektronix-sysv3
exit 0 ;;
Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
echo m68k-tektronix-bsd
exit 0 ;;
*:IRIX*:*:*)
echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
exit 0 ;;
????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
i?86:AIX:*:*)
echo i386-ibm-aix
exit 0 ;;
*:AIX:2:3)
if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
sed 's/^ //' << EOF >$dummy.c
#include <sys/systemcfg.h>
main()
{
if (!__power_pc())
exit(1);
puts("powerpc-ibm-aix3.2.5");
exit(0);
}
EOF
${CC-cc} $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
echo rs6000-ibm-aix3.2.5
elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
echo rs6000-ibm-aix3.2.4
else
echo rs6000-ibm-aix3.2
fi
exit 0 ;;
*:AIX:*:4)
IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then
IBM_ARCH=rs6000
else
IBM_ARCH=powerpc
fi
if [ -x /usr/bin/oslevel ] ; then
IBM_REV=`/usr/bin/oslevel`
else
IBM_REV=4.${UNAME_RELEASE}
fi
echo ${IBM_ARCH}-ibm-aix${IBM_REV}
exit 0 ;;
*:AIX:*:*)
echo rs6000-ibm-aix
exit 0 ;;
ibmrt:4.4BSD:*|romp-ibm:BSD:*)
echo romp-ibm-bsd4.4
exit 0 ;;
ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC NetBSD and
echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
exit 0 ;; # report: romp-ibm BSD 4.3
*:BOSX:*:*)
echo rs6000-bull-bosx
exit 0 ;;
DPX/2?00:B.O.S.:*:*)
echo m68k-bull-sysv3
exit 0 ;;
9000/[34]??:4.3bsd:1.*:*)
echo m68k-hp-bsd
exit 0 ;;
hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
echo m68k-hp-bsd4.4
exit 0 ;;
9000/[34678]??:HP-UX:*:*)
case "${UNAME_MACHINE}" in
9000/31? ) HP_ARCH=m68000 ;;
9000/[34]?? ) HP_ARCH=m68k ;;
9000/6?? | 9000/7?? | 9000/80[24] | 9000/8?[13679] | 9000/892 )
sed 's/^ //' << EOF >$dummy.c
#include <stdlib.h>
#include <unistd.h>
int main ()
{
#if defined(_SC_KERNEL_BITS)
long bits = sysconf(_SC_KERNEL_BITS);
#endif
long cpu = sysconf (_SC_CPU_VERSION);
switch (cpu)
{
case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
case CPU_PA_RISC2_0:
#if defined(_SC_KERNEL_BITS)
switch (bits)
{
case 64: puts ("hppa2.0w"); break;
case 32: puts ("hppa2.0n"); break;
default: puts ("hppa2.0"); break;
} break;
#else /* !defined(_SC_KERNEL_BITS) */
puts ("hppa2.0"); break;
#endif
default: puts ("hppa1.0"); break;
}
exit (0);
}
EOF
(${CC-cc} $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
rm -f $dummy.c $dummy
esac
HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
echo ${HP_ARCH}-hp-hpux${HPUX_REV}
exit 0 ;;
3050*:HI-UX:*:*)
sed 's/^ //' << EOF >$dummy.c
#include <unistd.h>
int
main ()
{
long cpu = sysconf (_SC_CPU_VERSION);
/* The order matters, because CPU_IS_HP_MC68K erroneously returns
true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
results, however. */
if (CPU_IS_PA_RISC (cpu))
{
switch (cpu)
{
case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
default: puts ("hppa-hitachi-hiuxwe2"); break;
}
}
else if (CPU_IS_HP_MC68K (cpu))
puts ("m68k-hitachi-hiuxwe2");
else puts ("unknown-hitachi-hiuxwe2");
exit (0);
}
EOF
${CC-cc} $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
echo unknown-hitachi-hiuxwe2
exit 0 ;;
9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
echo hppa1.1-hp-bsd
exit 0 ;;
9000/8??:4.3bsd:*:*)
echo hppa1.0-hp-bsd
exit 0 ;;
hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
echo hppa1.1-hp-osf
exit 0 ;;
hp8??:OSF1:*:*)
echo hppa1.0-hp-osf
exit 0 ;;
i?86:OSF1:*:*)
if [ -x /usr/sbin/sysversion ] ; then
echo ${UNAME_MACHINE}-unknown-osf1mk
else
echo ${UNAME_MACHINE}-unknown-osf1
fi
exit 0 ;;
parisc*:Lites*:*:*)
echo hppa1.1-hp-lites
exit 0 ;;
C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
echo c1-convex-bsd
exit 0 ;;
C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
if getsysinfo -f scalar_acc
then echo c32-convex-bsd
else echo c2-convex-bsd
fi
exit 0 ;;
C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
echo c34-convex-bsd
exit 0 ;;
C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
echo c38-convex-bsd
exit 0 ;;
C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
echo c4-convex-bsd
exit 0 ;;
CRAY*X-MP:*:*:*)
echo xmp-cray-unicos
exit 0 ;;
CRAY*Y-MP:*:*:*)
echo ymp-cray-unicos${UNAME_RELEASE}
exit 0 ;;
CRAY*[A-Z]90:*:*:*)
echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
exit 0 ;;
CRAY*TS:*:*:*)
echo t90-cray-unicos${UNAME_RELEASE}
exit 0 ;;
CRAY*T3E:*:*:*)
echo t3e-cray-unicosmk${UNAME_RELEASE}
exit 0 ;;
CRAY-2:*:*:*)
echo cray2-cray-unicos
exit 0 ;;
F300:UNIX_System_V:*:*)
FUJITSU_SYS=`uname -p | tr [A-Z] [a-z] | sed -e 's/\///'`
FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
exit 0 ;;
F301:UNIX_System_V:*:*)
echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
exit 0 ;;
hp3[0-9][05]:NetBSD:*:*)
echo m68k-hp-netbsd${UNAME_RELEASE}
exit 0 ;;
hp300:OpenBSD:*:*)
echo m68k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
sparc*:BSD/OS:*:*)
echo sparc-unknown-bsdi${UNAME_RELEASE}
exit 0 ;;
i?86:BSD/386:*:* | i?86:BSD/OS:*:*)
echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
exit 0 ;;
*:BSD/OS:*:*)
echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
exit 0 ;;
*:FreeBSD:*:*)
echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
exit 0 ;;
*:NetBSD:*:*)
echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
exit 0 ;;
*:OpenBSD:*:*)
echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
exit 0 ;;
i*:CYGWIN*:*)
echo ${UNAME_MACHINE}-pc-cygwin
exit 0 ;;
i*:MINGW*:*)
echo ${UNAME_MACHINE}-pc-mingw32
exit 0 ;;
p*:CYGWIN*:*)
echo powerpcle-unknown-cygwin
exit 0 ;;
prep*:SunOS:5.*:*)
echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
*:GNU:*:*)
echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
exit 0 ;;
*:Linux:*:*)
# uname on the ARM produces all sorts of strangeness, and we need to
# filter it out.
case "$UNAME_MACHINE" in
armv*) ;;
arm* | sa110*) UNAME_MACHINE="arm" ;;
esac
# The BFD linker knows what the default object file format is, so
# first see if it will tell us.
ld_help_string=`ld --help 2>&1`
ld_supported_emulations=`echo $ld_help_string \
| sed -ne '/supported emulations:/!d
s/[ ][ ]*/ /g
s/.*supported emulations: *//
s/ .*//
p'`
case "$ld_supported_emulations" in
i?86linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" ; exit 0 ;;
i?86coff) echo "${UNAME_MACHINE}-pc-linux-gnucoff" ; exit 0 ;;
sparclinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
armlinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
m68klinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
elf32ppc) echo "powerpc-unknown-linux-gnu" ; exit 0 ;;
esac
if test "${UNAME_MACHINE}" = "alpha" ; then
sed 's/^ //' <<EOF >$dummy.s
.globl main
.ent main
main:
.frame \$30,0,\$26,0
.prologue 0
.long 0x47e03d80 # implver $0
lda \$2,259
.long 0x47e20c21 # amask $2,$1
srl \$1,8,\$2
sll \$2,2,\$2
sll \$0,3,\$0
addl \$1,\$0,\$0
addl \$2,\$0,\$0
ret \$31,(\$26),1
.end main
EOF
LIBC=""
${CC-cc} $dummy.s -o $dummy 2>/dev/null
if test "$?" = 0 ; then
./$dummy
case "$?" in
7)
UNAME_MACHINE="alpha"
;;
15)
UNAME_MACHINE="alphaev5"
;;
14)
UNAME_MACHINE="alphaev56"
;;
10)
UNAME_MACHINE="alphapca56"
;;
16)
UNAME_MACHINE="alphaev6"
;;
esac
objdump --private-headers $dummy | \
grep ld.so.1 > /dev/null
if test "$?" = 0 ; then
LIBC="libc1"
fi
fi
rm -f $dummy.s $dummy
echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
elif test "${UNAME_MACHINE}" = "mips" ; then
cat >$dummy.c <<EOF
main(argc, argv)
int argc;
char *argv[];
{
#ifdef __MIPSEB__
printf ("%s-unknown-linux-gnu\n", argv[1]);
#endif
#ifdef __MIPSEL__
printf ("%sel-unknown-linux-gnu\n", argv[1]);
#endif
return 0;
}
EOF
${CC-cc} $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
else
# Either a pre-BFD a.out linker (linux-gnuoldld)
# or one that does not give us useful --help.
# GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
# If ld does not provide *any* "supported emulations:"
# that means it is gnuoldld.
echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:"
test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
case "${UNAME_MACHINE}" in
i?86)
VENDOR=pc;
;;
*)
VENDOR=unknown;
;;
esac
# Determine whether the default compiler is a.out or elf
cat >$dummy.c <<EOF
#include <features.h>
main(argc, argv)
int argc;
char *argv[];
{
#ifdef __ELF__
# ifdef __GLIBC__
# if __GLIBC__ >= 2
printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
# else
printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
# endif
# else
printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
# endif
#else
printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
#endif
return 0;
}
EOF
${CC-cc} $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
fi ;;
# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions
# are messed up and put the nodename in both sysname and nodename.
i?86:DYNIX/ptx:4*:*)
echo i386-sequent-sysv4
exit 0 ;;
i?86:UNIX_SV:4.2MP:2.*)
# Unixware is an offshoot of SVR4, but it has its own version
# number series starting with 2...
# I am not positive that other SVR4 systems won't match this,
# I just have to hope. -- rms.
# Use sysv4.2uw... so that sysv4* matches it.
echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
exit 0 ;;
i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
else
echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
fi
exit 0 ;;
i?86:*:3.2:*)
if test -f /usr/options/cb.name; then
UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
elif /bin/uname -X 2>/dev/null >/dev/null ; then
UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
&& UNAME_MACHINE=i586
echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
else
echo ${UNAME_MACHINE}-pc-sysv32
fi
exit 0 ;;
i?86:UnixWare:*:*)
if /bin/uname -X 2>/dev/null >/dev/null ; then
(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
&& UNAME_MACHINE=i586
fi
echo ${UNAME_MACHINE}-unixware-${UNAME_RELEASE}-${UNAME_VERSION}
exit 0 ;;
pc:*:*:*)
# uname -m prints for DJGPP always 'pc', but it prints nothing about
# the processor, so we play safe by assuming i386.
echo i386-pc-msdosdjgpp
exit 0 ;;
Intel:Mach:3*:*)
echo i386-pc-mach3
exit 0 ;;
paragon:*:*:*)
echo i860-intel-osf1
exit 0 ;;
i860:*:4.*:*) # i860-SVR4
if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
else # Add other i860-SVR4 vendors below as they are discovered.
echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
fi
exit 0 ;;
mini*:CTIX:SYS*5:*)
# "miniframe"
echo m68010-convergent-sysv
exit 0 ;;
M68*:*:R3V[567]*:*)
test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
OS_REL=''
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
&& echo i486-ncr-sysv4.3${OS_REL} && exit 0
/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
&& echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
&& echo i486-ncr-sysv4 && exit 0 ;;
m68*:LynxOS:2.*:*)
echo m68k-unknown-lynxos${UNAME_RELEASE}
exit 0 ;;
mc68030:UNIX_System_V:4.*:*)
echo m68k-atari-sysv4
exit 0 ;;
i?86:LynxOS:2.*:*)
echo i386-unknown-lynxos${UNAME_RELEASE}
exit 0 ;;
TSUNAMI:LynxOS:2.*:*)
echo sparc-unknown-lynxos${UNAME_RELEASE}
exit 0 ;;
rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
echo rs6000-unknown-lynxos${UNAME_RELEASE}
exit 0 ;;
SM[BE]S:UNIX_SV:*:*)
echo mips-dde-sysv${UNAME_RELEASE}
exit 0 ;;
RM*:SINIX-*:*:*)
echo mips-sni-sysv4
exit 0 ;;
*:SINIX-*:*:*)
if uname -p 2>/dev/null >/dev/null ; then
UNAME_MACHINE=`(uname -p) 2>/dev/null`
echo ${UNAME_MACHINE}-sni-sysv4
else
echo ns32k-sni-sysv
fi
exit 0 ;;
PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
# says <Richard.M.Bartel@ccMail.Census.GOV>
echo i586-unisys-sysv4
exit 0 ;;
*:UNIX_System_V:4*:FTX*)
# From Gerald Hewes <hewes@openmarket.com>.
# How about differentiating between stratus architectures? -djm
echo hppa1.1-stratus-sysv4
exit 0 ;;
*:*:*:FTX*)
# From seanf@swdc.stratus.com.
echo i860-stratus-sysv4
exit 0 ;;
mc68*:A/UX:*:*)
echo m68k-apple-aux${UNAME_RELEASE}
exit 0 ;;
news*:NEWS-OS:*:6*)
echo mips-sony-newsos6
exit 0 ;;
R3000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R4000:UNIX_SV:*:*)
if [ -d /usr/nec ]; then
echo mips-nec-sysv${UNAME_RELEASE}
else
echo mips-unknown-sysv${UNAME_RELEASE}
fi
exit 0 ;;
BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
echo powerpc-be-beos
exit 0 ;;
BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
echo powerpc-apple-beos
exit 0 ;;
BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
echo i586-pc-beos
exit 0 ;;
SX-4:SUPER-UX:*:*)
echo sx4-nec-superux${UNAME_RELEASE}
exit 0 ;;
SX-5:SUPER-UX:*:*)
echo sx5-nec-superux${UNAME_RELEASE}
exit 0 ;;
Power*:Rhapsody:*:*)
echo powerpc-apple-rhapsody${UNAME_RELEASE}
exit 0 ;;
*:Rhapsody:*:*)
echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
exit 0 ;;
esac
#echo '(No uname command or uname output not recognized.)' 1>&2
#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
cat >$dummy.c <<EOF
#ifdef _SEQUENT_
# include <sys/types.h>
# include <sys/utsname.h>
#endif
main ()
{
#if defined (sony)
#if defined (MIPSEB)
/* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
I don't know.... */
printf ("mips-sony-bsd\n"); exit (0);
#else
#include <sys/param.h>
printf ("m68k-sony-newsos%s\n",
#ifdef NEWSOS4
"4"
#else
""
#endif
); exit (0);
#endif
#endif
#if defined (__arm) && defined (__acorn) && defined (__unix)
printf ("arm-acorn-riscix"); exit (0);
#endif
#if defined (hp300) && !defined (hpux)
printf ("m68k-hp-bsd\n"); exit (0);
#endif
#if defined (NeXT)
#if !defined (__ARCHITECTURE__)
#define __ARCHITECTURE__ "m68k"
#endif
int version;
version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
if (version < 4)
printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
else
printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
exit (0);
#endif
#if defined (MULTIMAX) || defined (n16)
#if defined (UMAXV)
printf ("ns32k-encore-sysv\n"); exit (0);
#else
#if defined (CMU)
printf ("ns32k-encore-mach\n"); exit (0);
#else
printf ("ns32k-encore-bsd\n"); exit (0);
#endif
#endif
#endif
#if defined (__386BSD__)
printf ("i386-pc-bsd\n"); exit (0);
#endif
#if defined (sequent)
#if defined (i386)
printf ("i386-sequent-dynix\n"); exit (0);
#endif
#if defined (ns32000)
printf ("ns32k-sequent-dynix\n"); exit (0);
#endif
#endif
#if defined (_SEQUENT_)
struct utsname un;
uname(&un);
if (strncmp(un.version, "V2", 2) == 0) {
printf ("i386-sequent-ptx2\n"); exit (0);
}
if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
printf ("i386-sequent-ptx1\n"); exit (0);
}
printf ("i386-sequent-ptx\n"); exit (0);
#endif
#if defined (vax)
#if !defined (ultrix)
printf ("vax-dec-bsd\n"); exit (0);
#else
printf ("vax-dec-ultrix\n"); exit (0);
#endif
#endif
#if defined (alliant) && defined (i860)
printf ("i860-alliant-bsd\n"); exit (0);
#endif
exit (1);
}
EOF
${CC-cc} $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
# Apollos put the system type in the environment.
test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
# Convex versions that predate uname can use getsysinfo(1)
if [ -x /usr/convex/getsysinfo ]
then
case `getsysinfo -f cpu_type` in
c1*)
echo c1-convex-bsd
exit 0 ;;
c2*)
if getsysinfo -f scalar_acc
then echo c32-convex-bsd
else echo c2-convex-bsd
fi
exit 0 ;;
c34*)
echo c34-convex-bsd
exit 0 ;;
c38*)
echo c38-convex-bsd
exit 0 ;;
c4*)
echo c4-convex-bsd
exit 0 ;;
esac
fi
#echo '(Unable to guess system type)' 1>&2
exit 1
kftp-0.4.0/config.sub 755 0 0 47200 6657733656 7443 #! /bin/sh
# Configuration validation subroutine script, version 1.1.
# Copyright (C) 1991, 92-97, 1998 Free Software Foundation, Inc.
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
# can handle that machine. It does not imply ALL GNU software can.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330,
# Boston, MA 02111-1307, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
# If it is invalid, we print an error message on stderr and exit with code 1.
# Otherwise, we print the canonical config type on stdout and succeed.
# This file is supposed to be the same for all GNU packages
# and recognize all the CPU types, system types and aliases
# that are meaningful with *any* GNU software.
# Each package is responsible for reporting which valid configurations
# it does not support. The user should be able to distinguish
# a failure to support a valid configuration from a meaningless
# configuration.
# The goal of this file is to map all the various variations of a given
# machine specification into a single specification in the form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
# or in some cases, the newer four-part form:
# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
# It is wrong to echo any other type of specification.
if [ x$1 = x ]
then
echo Configuration name missing. 1>&2
echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
echo "or $0 ALIAS" 1>&2
echo where ALIAS is a recognized configuration type. 1>&2
exit 1
fi
# First pass through any local machine types.
case $1 in
*local*)
echo $1
exit 0
;;
*)
;;
esac
# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
# Here we must recognize all the valid KERNEL-OS combinations.
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
linux-gnu*)
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
*)
basic_machine=`echo $1 | sed 's/-[^-]*$//'`
if [ $basic_machine != $1 ]
then os=`echo $1 | sed 's/.*-/-/'`
else os=; fi
;;
esac
### Let's recognize common machines as not being operating systems so
### that things like config.sub decstation-3100 work. We also
### recognize some manufacturers as not being operating systems, so we
### can provide default operating systems below.
case $os in
-sun*os*)
# Prevent following clause from handling this invalid input.
;;
-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-apple)
os=
basic_machine=$1
;;
-hiux*)
os=-hiuxwe2
;;
-sco5)
os=sco3.2v5
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco4)
os=-sco3.2v4
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco3.2.[4-9]*)
os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco3.2v[4-9]*)
# Don't forget version if it is 3.2v4 or newer.
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco*)
os=-sco3.2v2
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-isc)
os=-isc2.2
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-clix*)
basic_machine=clipper-intergraph
;;
-isc*)
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-lynx*)
os=-lynxos
;;
-ptx*)
basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
;;
-windowsnt*)
os=`echo $os | sed -e 's/windowsnt/winnt/'`
;;
-psos*)
os=-psos
;;
esac
# Decode aliases for certain CPU-COMPANY combinations.
case $basic_machine in
# Recognize the basic CPU types without company name.
# Some are omitted here because they have special meanings below.
tahoe | i860 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
| arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \
| 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 | hppa2.0 \
| alpha | alphaev5 | alphaev56 | alphapca56 | alphaev6 \
| alphapca57 | alphaev7 | we32k | ns16k | clipper \
| i370 | sh | powerpc | powerpcle | 1750a | dsp16xx | pdp11 \
| mips64 | mipsel | mips64el | mips64orion | mips64orionel \
| mipstx39 | mipstx39el | armv[34][lb] \
| sparc | sparclet | sparclite | sparc64 | v850)
basic_machine=$basic_machine-unknown
;;
# We use `pc' rather than `unknown'
# because (1) that's what they normally are, and
# (2) the word "unknown" tends to confuse beginning users.
i[34567]86)
basic_machine=$basic_machine-pc
;;
# Object if more than one company name word.
*-*-*)
echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
exit 1
;;
# Recognize the basic CPU types with company name.
vax-* | tahoe-* | i[34567]86-* | i860-* | m32r-* | m68k-* | m68000-* \
| m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
| mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
| power-* | none-* | 580-* | cray2-* | h8300-* | i960-* \
| xmp-* | ymp-* | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* \
| alpha-* | alphaev5-* | alphaev56-* | alphapca56-* \
| alphaev6-* | alphapca57-* | alphaev7-* | we32k-* | cydra-* \
| ns16k-* | pn-* | np1-* | xps100-* | clipper-* | orion-* \
| sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
| sparc64-* | mips64-* | mipsel-* | armv[34][lb]-* \
| mips64el-* | mips64orion-* | mips64orionel-* \
| mipstx39-* | mipstx39el-* \
| f301-* | armv*-*)
;;
# Recognize the various machine names and aliases which stand
# for a CPU type and a company and sometimes even an OS.
3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
basic_machine=m68000-att
;;
3b*)
basic_machine=we32k-att
;;
alliant | fx80)
basic_machine=fx80-alliant
;;
altos | altos3068)
basic_machine=m68k-altos
;;
am29k)
basic_machine=a29k-none
os=-bsd
;;
amdahl)
basic_machine=580-amdahl
os=-sysv
;;
amiga | amiga-*)
basic_machine=m68k-cbm
;;
amigaos | amigados)
basic_machine=m68k-cbm
os=-amigaos
;;
amigaunix | amix)
basic_machine=m68k-cbm
os=-sysv4
;;
apollo68)
basic_machine=m68k-apollo
os=-sysv
;;
aux)
basic_machine=m68k-apple
os=-aux
;;
balance)
basic_machine=ns32k-sequent
os=-dynix
;;
convex-c1)
basic_machine=c1-convex
os=-bsd
;;
convex-c2)
basic_machine=c2-convex
os=-bsd
;;
convex-c32)
basic_machine=c32-convex
os=-bsd
;;
convex-c34)
basic_machine=c34-convex
os=-bsd
;;
convex-c38)
basic_machine=c38-convex
os=-bsd
;;
cray | ymp)
basic_machine=ymp-cray
os=-unicos
;;
cray2)
basic_machine=cray2-cray
os=-unicos
;;
[ctj]90-cray)
basic_machine=c90-cray
os=-unicos
;;
crds | unos)
basic_machine=m68k-crds
;;
da30 | da30-*)
basic_machine=m68k-da30
;;
decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
basic_machine=mips-dec
;;
delta | 3300 | motorola-3300 | motorola-delta \
| 3300-motorola | delta-motorola)
basic_machine=m68k-motorola
;;
delta88)
basic_machine=m88k-motorola
os=-sysv3
;;
dpx20 | dpx20-*)
basic_machine=rs6000-bull
os=-bosx
;;
dpx2* | dpx2*-bull)
basic_machine=m68k-bull
os=-sysv3
;;
ebmon29k)
basic_machine=a29k-amd
os=-ebmon
;;
elxsi)
basic_machine=elxsi-elxsi
os=-bsd
;;
encore | umax | mmax)
basic_machine=ns32k-encore
;;
fx2800)
basic_machine=i860-alliant
;;
genix)
basic_machine=ns32k-ns
;;
gmicro)
basic_machine=tron-gmicro
os=-sysv
;;
h3050r* | hiux*)
basic_machine=hppa1.1-hitachi
os=-hiuxwe2
;;
h8300hms)
basic_machine=h8300-hitachi
os=-hms
;;
harris)
basic_machine=m88k-harris
os=-sysv3
;;
hp300-*)
basic_machine=m68k-hp
;;
hp300bsd)
basic_machine=m68k-hp
os=-bsd
;;
hp300hpux)
basic_machine=m68k-hp
os=-hpux
;;
hp9k2[0-9][0-9] | hp9k31[0-9])
basic_machine=m68000-hp
;;
hp9k3[2-9][0-9])
basic_machine=m68k-hp
;;
hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7)
basic_machine=hppa1.1-hp
;;
hp9k8[0-9][0-9] | hp8[0-9][0-9])
basic_machine=hppa1.0-hp
;;
hppa-next)
os=-nextstep3
;;
i370-ibm* | ibm*)
basic_machine=i370-ibm
os=-mvs
;;
# I'm not sure what "Sysv32" means. Should this be sysv3.2?
i[34567]86v32)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv32
;;
i[34567]86v4*)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv4
;;
i[34567]86v)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv
;;
i[34567]86sol2)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-solaris2
;;
iris | iris4d)
basic_machine=mips-sgi
case $os in
-irix*)
;;
*)
os=-irix4
;;
esac
;;
isi68 | isi)
basic_machine=m68k-isi
os=-sysv
;;
m88k-omron*)
basic_machine=m88k-omron
;;
magnum | m3230)
basic_machine=mips-mips
os=-sysv
;;
merlin)
basic_machine=ns32k-utek
os=-sysv
;;
miniframe)
basic_machine=m68000-convergent
;;
mipsel*-linux*)
basic_machine=mipsel-unknown
os=-linux-gnu
;;
mips*-linux*)
basic_machine=mips-unknown
os=-linux-gnu
;;
mips3*-*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
;;
mips3*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
;;
ncr3000)
basic_machine=i486-ncr
os=-sysv4
;;
netwinder)
basic_machine=armv4l-corel
os=-linux
;;
news | news700 | news800 | news900)
basic_machine=m68k-sony
os=-newsos
;;
news1000)
basic_machine=m68030-sony
os=-newsos
;;
news-3600 | risc-news)
basic_machine=mips-sony
os=-newsos
;;
next | m*-next )
basic_machine=m68k-next
case $os in
-nextstep* )
;;
-ns2*)
os=-nextstep2
;;
*)
os=-nextstep3
;;
esac
;;
nh3000)
basic_machine=m68k-harris
os=-cxux
;;
nh[45]000)
basic_machine=m88k-harris
os=-cxux
;;
nindy960)
basic_machine=i960-intel
os=-nindy
;;
np1)
basic_machine=np1-gould
;;
pa-hitachi)
basic_machine=hppa1.1-hitachi
os=-hiuxwe2
;;
paragon)
basic_machine=i860-intel
os=-osf
;;
pbd)
basic_machine=sparc-tti
;;
pbb)
basic_machine=m68k-tti
;;
pc532 | pc532-*)
basic_machine=ns32k-pc532
;;
pentium | p5 | k5 | nexen)
basic_machine=i586-pc
;;
pentiumpro | p6 | k6 | 6x86)
basic_machine=i686-pc
;;
pentiumii | pentium2)
basic_machine=i786-pc
;;
pentium-* | p5-* | k5-* | nexen-*)
basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pentiumpro-* | p6-* | k6-* | 6x86-*)
basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pentiumii-* | pentium2-*)
basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pn)
basic_machine=pn-gould
;;
power) basic_machine=rs6000-ibm
;;
ppc) basic_machine=powerpc-unknown
;;
ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppcle | powerpclittle | ppc-le | powerpc-little)
basic_machine=powerpcle-unknown
;;
ppcle-* | powerpclittle-*)
basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ps2)
basic_machine=i386-ibm
;;
rm[46]00)
basic_machine=mips-siemens
;;
rtpc | rtpc-*)
basic_machine=romp-ibm
;;
sequent)
basic_machine=i386-sequent
;;
sh)
basic_machine=sh-hitachi
os=-hms
;;
sps7)
basic_machine=m68k-bull
os=-sysv2
;;
spur)
basic_machine=spur-unknown
;;
sun2)
basic_machine=m68000-sun
;;
sun2os3)
basic_machine=m68000-sun
os=-sunos3
;;
sun2os4)
basic_machine=m68000-sun
os=-sunos4
;;
sun3os3)
basic_machine=m68k-sun
os=-sunos3
;;
sun3os4)
basic_machine=m68k-sun
os=-sunos4
;;
sun4os3)
basic_machine=sparc-sun
os=-sunos3
;;
sun4os4)
basic_machine=sparc-sun
os=-sunos4
;;
sun4sol2)
basic_machine=sparc-sun
os=-solaris2
;;
sun3 | sun3-*)
basic_machine=m68k-sun
;;
sun4)
basic_machine=sparc-sun
;;
sun386 | sun386i | roadrunner)
basic_machine=i386-sun
;;
symmetry)
basic_machine=i386-sequent
os=-dynix
;;
tx39)
basic_machine=mipstx39-unknown
;;
tx39el)
basic_machine=mipstx39el-unknown
;;
tower | tower-32)
basic_machine=m68k-ncr
;;
udi29k)
basic_machine=a29k-amd
os=-udi
;;
ultra3)
basic_machine=a29k-nyu
os=-sym1
;;
vaxv)
basic_machine=vax-dec
os=-sysv
;;
vms)
basic_machine=vax-dec
os=-vms
;;
vpp*|vx|vx-*)
basic_machine=f301-fujitsu
;;
vxworks960)
basic_machine=i960-wrs
os=-vxworks
;;
vxworks68)
basic_machine=m68k-wrs
os=-vxworks
;;
vxworks29k)
basic_machine=a29k-wrs
os=-vxworks
;;
xmp)
basic_machine=xmp-cray
os=-unicos
;;
xps | xps100)
basic_machine=xps100-honeywell
;;
none)
basic_machine=none-none
os=-none
;;
# Here we handle the default manufacturer of certain CPU types. It is in
# some cases the only manufacturer, in others, it is the most popular.
mips)
if [ x$os = x-linux-gnu ]; then
basic_machine=mips-unknown
else
basic_machine=mips-mips
fi
;;
romp)
basic_machine=romp-ibm
;;
rs6000)
basic_machine=rs6000-ibm
;;
vax)
basic_machine=vax-dec
;;
pdp11)
basic_machine=pdp11-dec
;;
we32k)
basic_machine=we32k-att
;;
sparc)
basic_machine=sparc-sun
;;
cydra)
basic_machine=cydra-cydrome
;;
orion)
basic_machine=orion-highlevel
;;
orion105)
basic_machine=clipper-highlevel
;;
*)
echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
exit 1
;;
esac
# Here we canonicalize certain aliases for manufacturers.
case $basic_machine in
*-digital*)
basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
;;
*-commodore*)
basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
;;
*)
;;
esac
# Decode manufacturer-specific aliases for certain operating systems.
if [ x"$os" != x"" ]
then
case $os in
# First match some system type aliases
# that might get confused with valid system types.
# -solaris* is a basic system type, with this one exception.
-solaris1 | -solaris1.*)
os=`echo $os | sed -e 's|solaris1|sunos4|'`
;;
-solaris)
os=-solaris2
;;
-svr4*)
os=-sysv4
;;
-unixware*)
os=-sysv4.2uw
;;
-gnu/linux*)
os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
;;
# First accept the basic system types.
# The portable systems comes first.
# Each alternative MUST END IN A *, to match a version number.
# -sysv* is not here because it comes later, after sysvr4.
-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
| -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
| -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
| -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
| -aos* \
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
| -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
| -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
| -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
| -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
| -mingw32* | -linux-gnu* | -uxpv* | -beos* | -rhapsody* \
| -openstep*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-linux*)
os=`echo $os | sed -e 's|linux|linux-gnu|'`
;;
-sunos5*)
os=`echo $os | sed -e 's|sunos5|solaris2|'`
;;
-sunos6*)
os=`echo $os | sed -e 's|sunos6|solaris3|'`
;;
-osfrose*)
os=-osfrose
;;
-osf*)
os=-osf
;;
-utek*)
os=-bsd
;;
-dynix*)
os=-bsd
;;
-acis*)
os=-aos
;;
-ctix* | -uts*)
os=-sysv
;;
-ns2 )
os=-nextstep2
;;
# Preserve the version number of sinix5.
-sinix5.*)
os=`echo $os | sed -e 's|sinix|sysv|'`
;;
-sinix*)
os=-sysv4
;;
-triton*)
os=-sysv3
;;
-oss*)
os=-sysv3
;;
-svr4)
os=-sysv4
;;
-svr3)
os=-sysv3
;;
-sysvr4)
os=-sysv4
;;
# This must come after -sysvr4.
-sysv*)
;;
-xenix)
os=-xenix
;;
-none)
;;
*)
# Get rid of the `-' at the beginning of $os.
os=`echo $os | sed 's/[^-]*-//'`
echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
exit 1
;;
esac
else
# Here we handle the default operating systems that come with various machines.
# The value should be what the vendor currently ships out the door with their
# machine or put another way, the most popular os provided with the machine.
# Note that if you're going to try to match "-MANUFACTURER" here (say,
# "-sun"), then you have to tell the case statement up towards the top
# that MANUFACTURER isn't an operating system. Otherwise, code above
# will signal an error saying that MANUFACTURER isn't an operating
# system, and we'll never get to this point.
case $basic_machine in
*-acorn)
os=-riscix1.2
;;
arm*-corel)
os=-linux
;;
arm*-semi)
os=-aout
;;
pdp11-*)
os=-none
;;
*-dec | vax-*)
os=-ultrix4.2
;;
m68*-apollo)
os=-domain
;;
i386-sun)
os=-sunos4.0.2
;;
m68000-sun)
os=-sunos3
# This also exists in the configure program, but was not the
# default.
# os=-sunos4
;;
*-tti) # must be before sparc entry or we get the wrong os.
os=-sysv3
;;
sparc-* | *-sun)
os=-sunos4.1.1
;;
*-be)
os=-beos
;;
*-ibm)
os=-aix
;;
*-hp)
os=-hpux
;;
*-hitachi)
os=-hiux
;;
i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
os=-sysv
;;
*-cbm)
os=-amigaos
;;
*-dg)
os=-dgux
;;
*-dolphin)
os=-sysv3
;;
m68k-ccur)
os=-rtu
;;
m88k-omron*)
os=-luna
;;
*-next )
os=-nextstep
;;
*-sequent)
os=-ptx
;;
*-crds)
os=-unos
;;
*-ns)
os=-genix
;;
i370-*)
os=-mvs
;;
*-next)
os=-nextstep3
;;
*-gould)
os=-sysv
;;
*-highlevel)
os=-bsd
;;
*-encore)
os=-bsd
;;
*-sgi)
os=-irix
;;
*-siemens)
os=-sysv4
;;
*-masscomp)
os=-rtu
;;
f301-fujitsu)
os=-uxpv
;;
*)
os=-none
;;
esac
fi
# Here we handle the case where we know the os, and the CPU type, but not the
# manufacturer. We pick the logical manufacturer.
vendor=unknown
case $basic_machine in
*-unknown)
case $os in
-riscix*)
vendor=acorn
;;
-sunos*)
vendor=sun
;;
-aix*)
vendor=ibm
;;
-hpux*)
vendor=hp
;;
-hiux*)
vendor=hitachi
;;
-unos*)
vendor=crds
;;
-dgux*)
vendor=dg
;;
-luna*)
vendor=omron
;;
-genix*)
vendor=ns
;;
-mvs*)
vendor=ibm
;;
-ptx*)
vendor=sequent
;;
-vxsim* | -vxworks*)
vendor=wrs
;;
-aux*)
vendor=apple
;;
esac
basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
;;
esac
echo $basic_machine$os
kftp-0.4.0/configure 755 1750 1750 256030 6673512054 7565 #! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.12
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer"
ac_help="$ac_help
--enable-shared build shared libraries [default=yes]
--enable-shared=PKGS only build shared libraries if the current package
appears as an element in the PKGS list"
ac_help="$ac_help
--enable-static build static libraries [default=yes]
--enable-static=PKGS only build shared libraries if the current package
appears as an element in the PKGS list"
ac_help="$ac_help
--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
--with-gnome-includes Specify location of GNOME headers"
ac_help="$ac_help
--with-gnome-libs Specify location of GNOME libs"
ac_help="$ac_help
--with-gnome Specify prefix for GNOME files"
ac_help="$ac_help
--with-gtk-prefix=PFX Prefix where GTK is installed (optional)"
ac_help="$ac_help
--with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)"
ac_help="$ac_help
--disable-gtktest Do not try to compile and run a test GTK program"
# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12
ac_prev=
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval "$ac_prev=\$ac_option"
ac_prev=
continue
fi
case "$ac_option" in
-*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
*) ac_optarg= ;;
esac
# Accept the important Cygnus configure options, so we can diagnose typos.
case "$ac_option" in
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
bindir="$ac_optarg" ;;
-build | --build | --buil | --bui | --bu)
ac_prev=build ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
build="$ac_optarg" ;;
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
cache_file="$ac_optarg" ;;
-datadir | --datadir | --datadi | --datad | --data | --dat | --da)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
| --da=*)
datadir="$ac_optarg" ;;
-disable-* | --disable-*)
ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
eval "enable_${ac_feature}=no" ;;
-enable-* | --enable-*)
ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "enable_${ac_feature}='$ac_optarg'" ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
| --exec | --exe | --ex)
ac_prev=exec_prefix ;;
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
exec_prefix="$ac_optarg" ;;
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
-help | --help | --hel | --he)
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
--cache-file=FILE cache test results in FILE
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[same as prefix]
--bindir=DIR user executables in DIR [EPREFIX/bin]
--sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
--libexecdir=DIR program executables in DIR [EPREFIX/libexec]
--datadir=DIR read-only architecture-independent data in DIR
[PREFIX/share]
--sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data in DIR
[PREFIX/com]
--localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
--libdir=DIR object code libraries in DIR [EPREFIX/lib]
--includedir=DIR C header files in DIR [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
--infodir=DIR info documentation in DIR [PREFIX/info]
--mandir=DIR man documentation in DIR [PREFIX/man]
--srcdir=DIR find the sources in DIR [configure dir or ..]
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM
run sed PROGRAM on installed program names
EOF
cat << EOF
Host type:
--build=BUILD configure for building on BUILD [BUILD=HOST]
--host=HOST configure for HOST [guessed]
--target=TARGET configure for TARGET [TARGET=HOST]
Features and packages:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--x-includes=DIR X include files are in DIR
--x-libraries=DIR X library files are in DIR
EOF
if test -n "$ac_help"; then
echo "--enable and --with options recognized:$ac_help"
fi
exit 0 ;;
-host | --host | --hos | --ho)
ac_prev=host ;;
-host=* | --host=* | --hos=* | --ho=*)
host="$ac_optarg" ;;
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
includedir="$ac_optarg" ;;
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
infodir="$ac_optarg" ;;
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
libdir="$ac_optarg" ;;
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
libexecdir="$ac_optarg" ;;
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst \
| --locals | --local | --loca | --loc | --lo)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* \
| --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
localstatedir="$ac_optarg" ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
mandir="$ac_optarg" ;;
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c)
no_create=yes ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
no_recursion=yes ;;
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
| --oldin | --oldi | --old | --ol | --o)
ac_prev=oldincludedir ;;
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
oldincludedir="$ac_optarg" ;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
prefix="$ac_optarg" ;;
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
program_prefix="$ac_optarg" ;;
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
program_suffix="$ac_optarg" ;;
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transform-n | --program-transform- \
| --program-transform | --program-transfor \
| --program-transfo | --program-transf \
| --program-trans | --program-tran \
| --progr-tra | --program-tr | --program-t)
ac_prev=program_transform_name ;;
-program-transform-name=* | --program-transform-name=* \
| --program-transform-nam=* | --program-transform-na=* \
| --program-transform-n=* | --program-transform-=* \
| --program-transform=* | --program-transfor=* \
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name="$ac_optarg" ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
sbindir="$ac_optarg" ;;
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
| --sharedst | --shareds | --shared | --share | --shar \
| --sha | --sh)
ac_prev=sharedstatedir ;;
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
sharedstatedir="$ac_optarg" ;;
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir="$ac_optarg" ;;
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
sysconfdir="$ac_optarg" ;;
-target | --target | --targe | --targ | --tar | --ta | --t)
ac_prev=target ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
target="$ac_optarg" ;;
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
echo "configure generated by autoconf version 2.12"
exit 0 ;;
-with-* | --with-*)
ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "with_${ac_package}='$ac_optarg'" ;;
-without-* | --without-*)
ac_package=`echo $ac_option|sed -e 's/-*without-//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
eval "with_${ac_package}=no" ;;
--x)
# Obsolete; use --with-x.
with_x=yes ;;
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
| --x-incl | --x-inc | --x-in | --x-i)
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
x_includes="$ac_optarg" ;;
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries="$ac_optarg" ;;
-*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
;;
*)
if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
echo "configure: warning: $ac_option: invalid host type" 1>&2
fi
if test "x$nonopt" != xNONE; then
{ echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
fi
nonopt="$ac_option"
;;
esac
done
if test -n "$ac_prev"; then
{ echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
exec 6>/dev/null
else
exec 6>&1
fi
exec 5>./config.log
echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5
# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
case "$ac_arg" in
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c) ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
*" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
ac_configure_args="$ac_configure_args '$ac_arg'" ;;
*) ac_configure_args="$ac_configure_args $ac_arg" ;;
esac
done
# NLS nuisances.
# Only set these to C if already set. These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}" = set; then LANG=C; export LANG; fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h
# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=src/kftp.c
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then its parent.
ac_prog=$0
ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
srcdir=$ac_confdir
if test ! -r $srcdir/$ac_unique_file; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
if test "$ac_srcdir_defaulted" = yes; then
{ echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
else
{ echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
if test "x$prefix" != xNONE; then
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
else
CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
echo "loading site script $ac_site_file"
. "$ac_site_file"
fi
done
if test -r "$cache_file"; then
echo "loading cache $cache_file"
. $cache_file
else
echo "creating cache $cache_file"
> $cache_file
fi
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
ac_n= ac_c='
' ac_t=' '
else
ac_n=-n ac_c= ac_t=
fi
else
ac_n= ac_c='\c' ac_t=
fi
KFTP_MAJOR=0
KFTP_MINOR=4
KFTP_MICRO=0
KFTP_VERSION=$KFTP_MAJOR.$KFTP_MINOR.$KFTP_MICRO
VERSION=$KFTP_VERSION
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
elif test -f $ac_dir/install.sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
fi
done
if test -z "$ac_aux_dir"; then
{ echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:584: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
/|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
for ac_prog in ginstall installbsd scoinst install; do
if test -f $ac_dir/$ac_prog; then
if test $ac_prog = install &&
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
# OSF/1 installbsd also uses dspmsg, but is usable.
:
else
ac_cv_path_install="$ac_dir/$ac_prog -c"
break 2
fi
fi
done
;;
esac
done
IFS="$ac_save_IFS"
fi
if test "${ac_cv_path_install+set}" = set; then
INSTALL="$ac_cv_path_install"
else
# As a last resort, use the slow shell script. We don't cache a
# path for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the path is relative.
INSTALL="$ac_install_sh"
fi
fi
echo "$ac_t""$INSTALL" 1>&6
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
echo "configure:637: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
if test "$*" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftestfile`
fi
if test "$*" != "X $srcdir/configure conftestfile" \
&& test "$*" != "X conftestfile $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
{ echo "configure: error: ls -t appears to fail. Make sure there is not a broken
alias in your environment" 1>&2; exit 1; }
fi
test "$2" = conftestfile
)
then
# Ok.
:
else
{ echo "configure: error: newly created file is older than distributed files!
Check your system clock" 1>&2; exit 1; }
fi
rm -f conftest*
echo "$ac_t""yes" 1>&6
if test "$program_transform_name" = s,x,x,; then
program_transform_name=
else
# Double any \ or $. echo might interpret backslashes.
cat <<\EOF_SED > conftestsed
s,\\,\\\\,g; s,\$,$$,g
EOF_SED
program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
rm -f conftestsed
fi
test "$program_prefix" != NONE &&
program_transform_name="s,^,${program_prefix},; $program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:694: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftestmake <<\EOF
all:
@echo 'ac_maketemp="${MAKE}"'
EOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
eval ac_cv_prog_make_${ac_make}_set=yes
else
eval ac_cv_prog_make_${ac_make}_set=no
fi
rm -f conftestmake
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
echo "$ac_t""yes" 1>&6
SET_MAKE=
else
echo "$ac_t""no" 1>&6
SET_MAKE="MAKE=${MAKE-make}"
fi
PACKAGE=kftp
VERSION=$VERSION
if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
{ echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
fi
cat >> confdefs.h <<EOF
#define PACKAGE "$PACKAGE"
EOF
cat >> confdefs.h <<EOF
#define VERSION "$VERSION"
EOF
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
echo "configure:740: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (aclocal --version) < /dev/null > /dev/null 2>&1; then
ACLOCAL=aclocal
echo "$ac_t""found" 1>&6
else
ACLOCAL="$missing_dir/missing aclocal"
echo "$ac_t""missing" 1>&6
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
echo "configure:753: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (autoconf --version) < /dev/null > /dev/null 2>&1; then
AUTOCONF=autoconf
echo "$ac_t""found" 1>&6
else
AUTOCONF="$missing_dir/missing autoconf"
echo "$ac_t""missing" 1>&6
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
echo "configure:766: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (automake --version) < /dev/null > /dev/null 2>&1; then
AUTOMAKE=automake
echo "$ac_t""found" 1>&6
else
AUTOMAKE="$missing_dir/missing automake"
echo "$ac_t""missing" 1>&6
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
echo "configure:779: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (autoheader --version) < /dev/null > /dev/null 2>&1; then
AUTOHEADER=autoheader
echo "$ac_t""found" 1>&6
else
AUTOHEADER="$missing_dir/missing autoheader"
echo "$ac_t""missing" 1>&6
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
echo "configure:792: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
MAKEINFO=makeinfo
echo "$ac_t""found" 1>&6
else
MAKEINFO="$missing_dir/missing makeinfo"
echo "$ac_t""missing" 1>&6
fi
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
echo "configure:806: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
USE_MAINTAINER_MODE=$enableval
else
USE_MAINTAINER_MODE=no
fi
echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
if test $USE_MAINTAINER_MODE = yes; then
MAINT=
else
MAINT='#M#'
fi
for k in macros ; do ACLOCAL="$ACLOCAL -I $k" ; done
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
enableval="$enable_shared"
p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS="$ac_save_ifs"
;;
esac
else
enable_shared=yes
fi
# Check whether --enable-static or --disable-static was given.
if test "${enable_static+set}" = set; then
enableval="$enable_static"
p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS="$ac_save_ifs"
;;
esac
else
enable_static=yes
fi
# Make sure we can run config.sub.
if $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:878: checking host system type" >&5
host_alias=$host
case "$host_alias" in
NONE)
case $nonopt in
NONE)
if host_alias=`$ac_config_guess`; then :
else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
fi ;;
*) host_alias=$nonopt ;;
esac ;;
esac
host=`$ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:901: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="ranlib"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:930: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CC="gcc"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
echo "$ac_t""$CC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:959: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
ac_prog_rejected=no
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
fi
ac_cv_prog_CC="cc"
break
fi
done
IFS="$ac_save_ifs"
if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
set dummy $ac_cv_prog_CC
shift
if test $# -gt 0; then
# We chose a different compiler from the bogus one.
# However, it has the same basename, so the bogon will be chosen
# first if we set CC to just the basename; use the full file name.
shift
set dummy "$ac_dir/$ac_word" "$@"
shift
ac_cv_prog_CC="$@"
fi
fi
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
echo "$ac_t""$CC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:1007: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
#line 1017 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
if { (eval echo configure:1021: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
ac_cv_prog_cc_cross=no
else
ac_cv_prog_cc_cross=yes
fi
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_prog_cc_works=no
fi
rm -fr conftest*
echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:1041: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:1046: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.c <<EOF
#ifdef __GNUC__
yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1055: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
if test $ac_cv_prog_gcc = yes; then
GCC=yes
ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:1070: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
ac_cv_prog_cc_g=yes
else
ac_cv_prog_cc_g=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
if test "$ac_test_CFLAGS" = set; then
CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
CFLAGS="-g -O2"
else
CFLAGS="-O2"
fi
else
GCC=
test "${CFLAGS+set}" = set || CFLAGS="-g"
fi
# Check whether --with-gnu-ld or --without-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
withval="$with_gnu_ld"
test "$withval" = no || with_gnu_ld=yes
else
with_gnu_ld=no
fi
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
echo "configure:1110: checking for ld used by GCC" >&5
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
/* | A-Za-z:\\*)
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
echo "configure:1128: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
echo "configure:1131: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
else
ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi
LD="$ac_cv_path_LD"
if test -n "$LD"; then
echo "$ac_t""$LD" 1>&6
else
echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
echo "configure:1167: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
ac_cv_prog_gnu_ld=yes
else
ac_cv_prog_gnu_ld=no
fi
fi
echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
echo "configure:1183: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$NM" in
/* | A-Za-z:\\*)
ac_cv_path_NM="$NM" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -B"
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -p"
else
ac_cv_path_NM="$ac_dir/nm"
fi
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
;;
esac
fi
NM="$ac_cv_path_NM"
echo "$ac_t""$NM" 1>&6
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
echo "configure:1220: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftestdata
if ln -s X conftestdata 2>/dev/null
then
rm -f conftestdata
ac_cv_prog_LN_S="ln -s"
else
ac_cv_prog_LN_S=ln
fi
fi
LN_S="$ac_cv_prog_LN_S"
if test "$ac_cv_prog_LN_S" = "ln -s"; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
# Check for any special flags to pass to ltconfig.
libtool_flags=
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$host" in
*-*-irix6*)
# Find out which ABI we are using.
echo '#line 1256 "configure"' > conftest.$ac_ext
if { (eval echo configure:1257: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
CFLAGS="$CFLAGS -belf"
;;
esac
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Check whether --with-gnome-includes or --without-gnome-includes was given.
if test "${with_gnome_includes+set}" = set; then
withval="$with_gnome_includes"
CFLAGS="$CFLAGS -I$withval"
fi
# Check whether --with-gnome-libs or --without-gnome-libs was given.
if test "${with_gnome_libs+set}" = set; then
withval="$with_gnome_libs"
LDFLAGS="$LDFLAGS -L$withval"
gnome_prefix=$withval
fi
# Check whether --with-gnome or --without-gnome was given.
if test "${with_gnome+set}" = set; then
withval="$with_gnome"
if test x$withval = xyes; then
want_gnome=yes
:
else
if test "x$withval" = xno; then
want_gnome=no
else
want_gnome=yes
LDFLAGS="$LDFLAGS -L$withval/lib"
CFLAGS="$CFLAGS -I$withval/include"
gnome_prefix=$withval/lib
fi
fi
else
want_gnome=yes
fi
if test "x$want_gnome" = xyes; then
# Extract the first word of "gnome-config", so it can be a program name with args.
set dummy gnome-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1342: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GNOME_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GNOME_CONFIG" in
/*)
ac_cv_path_GNOME_CONFIG="$GNOME_CONFIG" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_GNOME_CONFIG="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_GNOME_CONFIG" && ac_cv_path_GNOME_CONFIG="no"
;;
esac
fi
GNOME_CONFIG="$ac_cv_path_GNOME_CONFIG"
if test -n "$GNOME_CONFIG"; then
echo "$ac_t""$GNOME_CONFIG" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test "$GNOME_CONFIG" = "no"; then
no_gnome_config="yes"
else
echo $ac_n "checking if $GNOME_CONFIG works""... $ac_c" 1>&6
echo "configure:1375: checking if $GNOME_CONFIG works" >&5
if $GNOME_CONFIG --libs-only-l gnome >/dev/null 2>&1; then
echo "$ac_t""yes" 1>&6
# Extract the first word of "orbit-config", so it can be a program name with args.
set dummy orbit-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1383: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_ORBIT_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$ORBIT_CONFIG" in
/*)
ac_cv_path_ORBIT_CONFIG="$ORBIT_CONFIG" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_ORBIT_CONFIG="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_ORBIT_CONFIG" && ac_cv_path_ORBIT_CONFIG="no"
;;
esac
fi
ORBIT_CONFIG="$ac_cv_path_ORBIT_CONFIG"
if test -n "$ORBIT_CONFIG"; then
echo "$ac_t""$ORBIT_CONFIG" 1>&6
else
echo "$ac_t""no" 1>&6
fi
# Extract the first word of "orbit-idl", so it can be a program name with args.
set dummy orbit-idl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1415: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_ORBIT_IDL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$ORBIT_IDL" in
/*)
ac_cv_path_ORBIT_IDL="$ORBIT_IDL" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_ORBIT_IDL="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_ORBIT_IDL" && ac_cv_path_ORBIT_IDL="no"
;;
esac
fi
ORBIT_IDL="$ac_cv_path_ORBIT_IDL"
if test -n "$ORBIT_IDL"; then
echo "$ac_t""$ORBIT_IDL" 1>&6
else
echo "$ac_t""no" 1>&6
fi
echo $ac_n "checking for working ORBit environment""... $ac_c" 1>&6
echo "configure:1445: checking for working ORBit environment" >&5
if eval "test \"`echo '$''{'gnome_cv_orbit_found'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test x$ORBIT_CONFIG = xno -o x$ORBIT_IDL = xno; then
gnome_cv_orbit_found=no
else
gnome_cv_orbit_found=yes
fi
fi
echo "$ac_t""$gnome_cv_orbit_found" 1>&6
if test x$gnome_cv_orbit_found = xyes; then
HAVE_ORBIT_TRUE=
HAVE_ORBIT_FALSE='#'
else
HAVE_ORBIT_TRUE='#'
HAVE_ORBIT_FALSE=
fi
if test x$gnome_cv_orbit_found = xyes; then
ORBIT_CFLAGS=`orbit-config --cflags client server`
ORBIT_LIBS=`orbit-config --use-service=name --libs client server`
else
if test xfail = xfailure; then
{ echo "configure: error: ORBit not installed or installation problem" 1>&2; exit 1; }
fi
fi
echo $ac_n "checking for gnorba libraries""... $ac_c" 1>&6
echo "configure:1481: checking for gnorba libraries" >&5
if eval "test \"`echo '$''{'gnome_cv_gnorba_found'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gnome_cv_gnorba_found=no
if test x$gnome_cv_orbit_found = xyes; then
GNORBA_CFLAGS="`gnome-config --cflags gnorba gnomeui`"
GNORBA_LIBS="`gnome-config --libs gnorba gnomeui`"
if test -n "$GNORBA_LIBS"; then
gnome_cv_gnorba_found=yes
fi
fi
fi
echo "$ac_t""$gnome_cv_gnorba_found" 1>&6
if test x$gnome_cv_gnorba_found = xyes; then
HAVE_GNORBA_TRUE=
HAVE_GNORBA_FALSE='#'
else
HAVE_GNORBA_TRUE='#'
HAVE_GNORBA_FALSE=
fi
if test x$gnome_cv_orbit_found = xyes; then
GNORBA_CFLAGS="`gnome-config --cflags gnorba gnomeui`"
GNORBA_LIBS="`gnome-config --libs gnorba gnomeui`"
else
if test xfail = xfailure; then
{ echo "configure: error: gnorba library not installed or installation problem" 1>&2; exit 1; }
fi
fi
GNOME_LIBS="`$GNOME_CONFIG --libs-only-l gnome`"
GNOMEUI_LIBS="`$GNOME_CONFIG --libs-only-l gnomeui`"
GNOMEGNORBA_LIBS="`$GNOME_CONFIG --libs-only-l gnorba gnomeui`"
GTKXMHTML_LIBS="`$GNOME_CONFIG --libs-only-l gtkxmhtml`"
GNOME_APPLET_LIBS="`$GNOME_CONFIG --libs-only-l applets`"
GNOME_LIBDIR="`$GNOME_CONFIG --libs-only-L gnorba gnomeui`"
GNOME_INCLUDEDIR="`$GNOME_CONFIG --cflags gnorba gnomeui`"
else
echo "$ac_t""no" 1>&6
no_gnome_config="yes"
fi
fi
if test x$exec_prefix = xNONE; then
if test x$prefix = xNONE; then
gnome_prefix=$ac_default_prefix/lib
else
gnome_prefix=$prefix/lib
fi
else
gnome_prefix=`eval echo \`echo $libdir\``
fi
if test "$no_gnome_config" = "yes"; then
echo $ac_n "checking for gnomeConf.sh file in $gnome_prefix""... $ac_c" 1>&6
echo "configure:1545: checking for gnomeConf.sh file in $gnome_prefix" >&5
if test -f $gnome_prefix/gnomeConf.sh; then
echo "$ac_t""found" 1>&6
echo "loading gnome configuration from" \
"$gnome_prefix/gnomeConf.sh"
. $gnome_prefix/gnomeConf.sh
else
echo "$ac_t""not found" 1>&6
if test xfail = xfail; then
{ echo "configure: error: Could not find the gnomeConf.sh file that is generated by gnome-libs install" 1>&2; exit 1; }
fi
fi
fi
fi
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1566: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CC="gcc"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
echo "$ac_t""$CC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1595: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
ac_prog_rejected=no
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
fi
ac_cv_prog_CC="cc"
break
fi
done
IFS="$ac_save_ifs"
if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
set dummy $ac_cv_prog_CC
shift
if test $# -gt 0; then
# We chose a different compiler from the bogus one.
# However, it has the same basename, so the bogon will be chosen
# first if we set CC to just the basename; use the full file name.
shift
set dummy "$ac_dir/$ac_word" "$@"
shift
ac_cv_prog_CC="$@"
fi
fi
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
echo "$ac_t""$CC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:1643: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
#line 1653 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
if { (eval echo configure:1657: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
ac_cv_prog_cc_cross=no
else
ac_cv_prog_cc_cross=yes
fi
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_prog_cc_works=no
fi
rm -fr conftest*
echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:1677: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:1682: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.c <<EOF
#ifdef __GNUC__
yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1691: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
if test $ac_cv_prog_gcc = yes; then
GCC=yes
ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:1706: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
ac_cv_prog_cc_g=yes
else
ac_cv_prog_cc_g=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
if test "$ac_test_CFLAGS" = set; then
CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
CFLAGS="-g -O2"
else
CFLAGS="-O2"
fi
else
GCC=
test "${CFLAGS+set}" = set || CFLAGS="-g"
fi
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:1744: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
/|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
for ac_prog in ginstall installbsd scoinst install; do
if test -f $ac_dir/$ac_prog; then
if test $ac_prog = install &&
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
# OSF/1 installbsd also uses dspmsg, but is usable.
:
else
ac_cv_path_install="$ac_dir/$ac_prog -c"
break 2
fi
fi
done
;;
esac
done
IFS="$ac_save_IFS"
fi
if test "${ac_cv_path_install+set}" = set; then
INSTALL="$ac_cv_path_install"
else
# As a last resort, use the slow shell script. We don't cache a
# path for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
# remo
