Filewatcher File Search File Search
Content Search
» » » » » libauthen-radius-perl_0.13-1_all.deb » Content »
pkg://libauthen-radius-perl_0.13-1_all.deb:40420/usr/share/man/man3/  info  control  downloads

libauthen-radius-perl - user authentication against radius…  more info»


Radius(3pm)      User Contributed Perl Documentation     Radius(3pm)

       Authen::Radius - provide simple Radius client facilities

         use Authen::Radius;

         $r = new Authen::Radius(Host => 'myserver', Secret => 'mysecret');
         print "auth result=", $r->check_pwd('myname', 'mypwd'), "\n";

         $r = new Authen::Radius(Host => 'myserver', Secret => 'mysecret');
         $r->add_attributes (
                       { Name => 'User-Name', Value => 'myname' },
                       { Name => 'Password', Value => 'mypwd' },
       # RFC 2865 calls this attribute
       # User-Password. Check your local RADIUS dictionary to find
       # out which name is used on your system
       #               { Name => 'User-Password', Value => 'mypwd' },
                       { Name => 'h323-return-code', Value => '0' }, # Cisco AV pair
                       { Name => 'Digest-Attributes', Value => { Method => 'REGISTER' } }
         $r->send_packet(ACCESS_REQUEST) and $type = $r->recv_packet();
         print "server response type = $type\n";
         for $a ($r->get_attributes()) {
               print "attr: name=$a->{'Name'} value=$a->{'Value'}\n";

       The "Authen::Radius" module provides a simple class that
       allows you to send/receive Radius requests/responses to/from
       a Radius server.

       new ( Host => HOST, Secret => SECRET [, TimeOut => TIMEOUT]
       [,Service => SERVICE] [, Debug => Bool])
           Creates & returns a blessed reference to a Radius object,
           or undef on failure.  Error status may be retrieved with
           "Authen::Radius::get_error" (errorcode) or
           "Authen::Radius::strerror" (verbose error string).

           The default "Service" is "radius", the alternative is
           "radius-acct".  If you do not specify port in the "Host"
           as a "hostname:port", then port specified in your
           /etc/services will be used. If there is nothing there,
           and you did not specify port either then default is 1812
           for "radius" and 1813 for "radius-acct".

           Optional parameter "Debug" with a Perl "true" value turns
           on debugging (verbose mode).

       load_dictionary ( [ DICTIONARY ] )
           Loads the definitions in the specified Radius dictionary
           file (standard Livingston radiusd format). Tries to load
           '"/etc/raddb/dictionary"' when no argument is specified,
           or dies. NOTE: you need to load valid dictionary if you
           plan to send Radius requests with other attributes than
           just "User-Name"/"Password".

           Checks with the Radius server if the specified "PASSWORD"
           is valid for user "USERNAME". Unless "NASIPADDRESS" is
           soecified, will be placed in the NAS-IP-Address
           attribute.  This method is actually a wrapper for subse‐
           quent calls to "clear_attributes", "add_attributes",
           "send_packet" and "recv_packet". It returns 1 if the
           "PASSWORD" is correct, or undef otherwise.

       add_attributes ( { Name => NAME, Value => VALUE [, Type =>
       TYPE] [, Vendor => VENDOR] }, ... )
           Adds any number of Radius attributes to the current
           Radius object. Attributes are specified as a list of anon
           hashes. They may be "Name"d with their dictionary name
           (provided a dictionary has been loaded first), or with
           their raw Radius attribute-type values. The "Type" pair
           should be specified when adding attributes that are not
           in the dictionary (or when no dictionary was loaded).
           Values for "TYPE" can be '"string"', '"integer"',
           '"ipaddr"' or '"avpair"'.

           Returns a list of references to anon hashes with the fol‐
           lowing key/value pairs : { Name => NAME, Code => RAWTYPE,
           Value => VALUE, RawValue => RAWVALUE, Vendor => VENDOR }.
           Each hash represents an attribute in the current object.
           The "Name" and "Value" pairs will contain values as
           translated by the dictionary (if one was loaded). The
           "Code" and "RawValue" pairs always contain the raw
           attribute type & value as received from the server.

           Clears all attributes for the current object.

       send_packet ( REQUEST_TYPE )
           Packs up a Radius packet based on the current secret &
           attributes and sends it to the server with a Request type
           of "REQUEST_TYPE". Exported "REQUEST_TYPE" methods are
           '"ACCESS_REQUEST"', '"ACCESS_ACCEPT"' ,
           ING_RESPONSE"', and '"DISCONNECT_REQUEST"'.  Returns the
           number of bytes sent, or undef on failure.

           Receives a Radius reply packet. Returns the Radius Reply
           type (see possible values for "REQUEST_TYPE" in method
           "send_packet") or undef on failure. Note that failure may
           be due to a failed recv() or a bad Radius response
           authenticator. Use "get_error" to find out.

           Returns the last "ERRORCODE" for the current object.
           Errorcodes are one-word strings always beginning with an

       strerror ( [ ERRORCODE ] )
           Returns a verbose error string for the last error for the
           current object, or for the specified "ERRORCODE".

       Carl Declerck <> - original design
       Alexander Kapitanenko <> and Andrew
       Zhilenko <> - later modifications.  Andrew
       Zhilenko <> is a current module's main‐
       taner at CPAN.

perl v5.8.8                  2007-04-14                  Radius(3pm)
Results 1 - 1 of 1
Help - FTP Sites List - Software Dir.
Search over 15 billion files
© 1997-2017