Filewatcher File Search File Search
Catalog
Content Search
» » » » » libconfig-model-openssh-perl_1.225-1_all.deb » Content »
pkg://libconfig-model-openssh-perl_1.225-1_all.deb:93404/usr/share/man/man3/  info  control  downloads

libconfig-model-openssh-perl - configuration file editor for OpenSsh…  more info»

Config::Model::models::Ssh.3pm.gz

Config::Model::moUser:Contributed PerConfig::Model::models::Ssh(3pm)



NAME
       Config::Model::models::Ssh - Configuration class Ssh

DESCRIPTION
       Configuration classes used by Config::Model

       Configuration class used by Config::Model to edit or validate
       /etc/ssh/ssh_config (when run as root) or ~/.ssh/config (when
       run as a regular user).

Elements
   EnableSSHKeysign
       Setting this option to 'yes' in the global client
       configuration file /etc/ssh/ssh_config enables the use of the
       helper program ssh-keysign(8) during HostbasedAuthentication.
       See ssh-keysign(8)for more information.  Optional. Type
       boolean. upstream_default: '0'.

   Host
       The declarations make in 'parameters' are applied only to the
       hosts that match one of the patterns given in pattern
       elements. A single '*' as a pattern can be used to provide
       global defaults for all hosts. The host is the hostname
       argument given on the command line (i.e. the name is not
       converted to a canonicalized host name before matching).
       Since the first obtained value for each parameter is used,
       more host-specific declarations should be given near the
       beginning of the hash (which takes order into account), and
       general defaults at the end.Optional. Type hash of node.

   AddressFamily
       Specifies which address family to use when
       connecting.Optional. Type enum. choice: 'any', 'inet',
       'inet6'. upstream_default: 'any'.

   BatchMode
       If set to 'yes', passphrase/password querying will be
       disabled. In addition, the ServerAliveInterval option will be
       set to 300 seconds by default. This option is useful in
       scripts and other batch jobs where no user is present to
       supply the password, and where it is desirable to detect a
       broken network swiftly. Optional. Type boolean.
       upstream_default: '0'.

   BindAddress
       Use the specified address on the local machine as the source
       address of the connection. Only useful on systems with more
       than one address. Note that this option does not work if
       UsePrivilegedPort is set to 'yes'.Optional. Type uniline.

   ChallengeResponseAuthentication
       Specifies whether to use challenge-response
       authentication.Optional. Type boolean. upstream_default: '1'.

   CheckHostIP
       If enabled, ssh(1) will additionally check the host IP
       address in the known_hosts file. This allows ssh to detect if
       a host key changed due to DNS spoofing. If disbled, the check
       will not be executed.Optional. Type boolean.
       upstream_default: '1'.

   Cipher
       Specifies the cipher to use for encrypting the session in
       protocol version 1. "des" is only supported in the ssh(1)
       client for interoperability with legacy protocol 1
       implementations that do not support the 3des cipher. Its use
       is strongly discouraged due to cryptographic
       weaknesses.Optional. Type enum. choice: 'blowfish', '3des',
       'des'. upstream_default: '3des'.

   Ciphers
       Specifies the ciphers allowed for protocol version 2 in order
       of preference. By default, all ciphers are allowed.Optional.
       Type check_list. choice: 'aes128-cbc', '3des-cbc',
       'blowfish-cbc', 'cast128-cbc', 'arcfour128', 'arcfour256',
       'arcfour', 'aes192-cbc', 'aes256-cbc', 'aes128-ctr',
       'aes192-ctr', 'aes256-ctr'.

   ClearAllForwardings
       Specifies that all local, remote, and dynamic port
       forwardings specified in the configuration files or on the
       command line be cleared. This option is primarily useful when
       used from the ssh(1) command line to clear port forwardings
       set in configuration files, and is automatically set by
       scp(1) and sftp(1).Optional. Type boolean. upstream_default:
       '0'.

   Compression
       Specifies whether to use compression.Optional. Type boolean.
       upstream_default: '0'.

   CompressionLevel
       Optional. Type integer. upstream_default: '6'.

   ConnectionAttempts
       Specifies the number of tries (one per second) to make before
       exiting. The argument must be an integer. This may be useful
       in scripts if the connection sometimes fails.Optional. Type
       integer. upstream_default: '1'.

   ConnectTimeout
       Specifies the timeout (in seconds) used when connecting to
       the SSH server, instead of using the default system TCP
       timeout. This value is used only when the target is down or
       really unreachable, not when it refuses the connection.
       Optional. Type integer.

   ControlMaster
       Enables the sharing of multiple sessions over a single
       network connection. When set to 'yes', ssh(1) will listen for
       connections on a control socket specified using the
       ControlPath argument. Additional sessions can connect to this
       socket using the same ControlPath with ControlMaster set to
       'no' (the default). These sessions will try to reuse the
       master instance's network connection rather than initiating
       new ones, but will fall back to connecting normally if the
       control socket does not exist, or is not listening.

       Setting this to 'ask' will cause ssh to listen for control
       connections, but require confirmation using the SSH_ASKPASS
       program before they are accepted (see ssh-add(1) for
       details). If the ControlPath cannot be opened, ssh will
       continue without connecting to a master instance.

       X11 and ssh-agent(1) forwarding is supported over these
       multiplexed connections, however the display and agent
       forwarded will be the one belonging to the master connection
       i.e. it is not pos sible to forward multiple displays or
       agents.

       Two additional options allow for opportunistic multiplexing:
       try to use a master connection but fall back to creating a
       new one if
        one does not already exist. These options are: 'auto' and
       'autoask'. The latter requires confirmation like the 'ask'
       option.  Optional. Type enum. choice: 'no', 'yes', 'ask',
       'auto', 'autoask'. upstream_default: 'no'.

   ControlPath
       Specify the path to the control socket used for connection
       sharing as described in the ControlMaster section above or
       the string 'none' to disable connection sharing.  In the
       path, '%l' will be substituted by the local host name, '%h'
       will be substituted by the target host name, '%p' the port,
       and '%r' by the remotelogin username. It is recommended that
       any ControlPath used for opportunistic connection sharing
       include at least %h, %p, and %r. This ensures that shared
       connections are uniquely identified.  Optional. Type uniline.

   DynamicForward
       Specifies that a TCP port on the local machine be forwarded
       over the secure channel, and the application protocol is then
       used to determine where to connect to from the remote
       machine.

       The argument must be [bind_address:]port. IPv6 addresses can
       be specified by enclosing addresses in square brackets or by
       using an alternative syntax: [bind_address/]port. By default,
       the local port is bound in accordance with the GatewayPorts
       setting. However, an explicit bind_address may be used to
       bind the connection to a specific address. The bind_address
       of 'localhost' indicates that the listening port be bound for
       local use only, while an empty address or '*' indicates that
       the port should be available from all interfaces.

       Currently the SOCKS4 and SOCKS5 protocols are supported, and
       ssh(1) will act as a SOCKS server. Multiple forwardings may
       be specified, and additional forwardings can be given on the
       command line. Only the superuser can forward privileged
       ports.  Optional. Type list of uniline.

   EscapeChar
       Sets the escape character (default: '~'). The escape
       character can also be set on the command line.  The argument
       should be a single character, '^' followed by a letter, or
       'none' to disable the escape character entirely (making the
       connection transparent for binary data).  Optional. Type
       uniline. upstream_default: '~'.

   ExitOnForwardFailure
       Specifies whether ssh(1) should terminate the connection if
       it cannot set up all requested dynamic, tunnel, local, and
       remote port forwardings.Optional. Type boolean.
       upstream_default: '0'.

   ForwardAgent
       Specifies whether the connection to the authentication agent
       (if any) will be forwarded to the remote machine.

       Agent forwarding should be enabled with caution.  Users with
       the ability to bypass file permissions on the remote host
       (for the agent's Unix-domain socket) can access the local
       agent through the forwarded connection.  An attacker cannot
       obtain key material from the agent, however they can perform
       operations on the keys that enable them to authenticate using
       the identities loaded into the agent.  Optional. Type
       boolean. upstream_default: '0'.

   ForwardX11
       Specifies whether X11 connections will be automatically
       redirected over the secure channel and DISPLAY set.

       X11 forwarding should be enabled with caution.  Users with
       the ability to bypass file permissions on the remote host
       (for the user's X11 authorization database) can access the
       local X11 dis play through the forwarded connection.  An
       attacker may then be able to perform activities such as
       keystroke monitoring if the ForwardX11Trusted option is also
       enabled.  Optional. Type boolean. upstream_default: '0'.

   ForwardX11Trusted
       If this option is set, remote X11 clients will have full
       access to the original X11 display.

       If this option is not set, remote X11 clients will be
       considered untrusted and prevented from stealing or tampering
       with data belonging to trusted X11 clients. Furthermore, the
       xauth(1) token used for the session will be set to expire
       after 20 minutes. Remote clients will be refused access after
       this time.

       See the X11 SECURITY extension specification for full details
       on the restrictions imposed on untrusted clients.  Optional.
       Type boolean. upstream_default: '0'.

   GlobalKnownHostsFile
       Specifies a file to use for the global host key database.
       Optional. Type uniline. upstream_default:
       '/etc/ssh/ssh_known_hosts'.

   GSSAPIAuthentication
       Specifies whether user authentication based on GSSAPI is
       allowed. Note that this option applies to protocol version 2
       only.Optional. Type boolean. upstream_default: '0'.

   GSSAPIDelegateCredentials
       Forward (delegate) credentials to the server. Note that this
       option applies to protocol version 2 only.  Optional. Type
       boolean. upstream_default: '0'.

   HashKnownHosts
       Indicates that ssh(1) should hash host names and addresses
       when they are added to ~/.ssh/known_hosts. These hashed names
       may be used normally by ssh(1) and sshd(8), but they do not
       reveal identifying information should the file's contents be
       disclosed. Note that existing names and addresses in known
       hosts files will not be converted automatically, but may be
       manually hashed using ssh-keygen(1).  Optional. Type boolean.
       upstream_default: '0'.

   HostbasedAuthentication
       Specifies whether to try rhosts based authentication with
       public key authentication. This option applies to protocol
       version 2 only and is similar to RhostsRSAAuthentication.
       Optional. Type boolean. upstream_default: '0'.

   HostKeyAlgorithms
       Specifies the protocol version 2 host key algorithms that the
       client wants to use in order of preference.Optional. Type
       check_list. choice: 'ssh-rsa', 'ssh-dss'.

   HostKeyAlias
       Specifies an alias that should be used instead of the real
       host name when looking up or saving the host key in the host
       key database files. This option is useful for tunneling SSH
       connections or for multiple servers running on a single
       host.Optional. Type uniline.

   HostName
       Specifies the real host name to log into. This can be used to
       specify nicknames or abbreviations for hosts. The default is
       the name given on the command line. Numeric IP addresses are
       also permitted (both on the command line and in HostName
       specifications).Optional. Type uniline.

   IdentitiesOnly
       Specifies that ssh(1) should only use the authentication
       identity files configured in the ssh_config files, even if
       ssh-agent(1) offers more identities. This option is intended
       for situations where ssh-agent offers many different
       identities.Optional. Type boolean. upstream_default: '0'.

   IdentityFile
       Specifies a file from which the user's RSA or DSA
       authentication identity is read. The default is
       ~/.ssh/identity for protocol version 1, and ~/.ssh/id_rsa and
       ~/.ssh/id_dsa for protocol version 2. Additionally, any
       identities represented by the authentication agent will be
       used for authentication.

       The file name may use the tilde syntax to refer to a user's
       home directory or one of the following escape characters:
       '%d' (local user's home directory), '%u' (local user name),
       '%l' (local host  name), '%h' (remote host name) or '%r'
       (remote user name).

       It is possible to have multiple identity files specified in
       con figuration files; all these identities will be tried in
       sequence.  Optional. Type list of uniline.

   KbdInteractiveAuthentication
       Specifies whether to use keyboard-interactive authentication.
       Optional. Type boolean. upstream_default: '1'.

   KbdInteractiveDevices
       Specifies the list of methods to use in keyboard-interactive
       authentication.  Multiple method names must be comma-
       separated. The default is to use the server specified list.
       The methods available vary depending on what the server
       supports. For an OpenSSH server, it may be zero or more of:
       'bsdauth', 'pam', and 'skey'.Optional. Type list of uniline.

   GatewayPorts
       Specifies whether remote hosts are allowed to connect to
       local forwarded ports. By default, ssh(1) binds local port
       forwardings to the loopback address. This prevents other
       remote hosts from connecting to forwarded ports. GatewayPorts
       can be used to specify that ssh should bind local port
       forwardings to the wildcard address, thus allowing remote
       hosts to connect to forwarded ports. Optional. Type boolean.
       upstream_default: '0'.

   LocalForward - Local port forwarding
       Specifies that a TCP port on the local machine be forwarded
       over the secure channel to the specified host and port from
       the remote machine. The first argument must be
       [bind_address:]port and the second argument must be
       host:hostport.

       IPv6 addresses can be specified by enclosing addresses in
       square brackets or by using an alternative syntax:
       [bind_address/]port and host/hostport.

       Multiple forwardings may be specified, and additional
       forwardings can be given on the command line. Only the
       superuser can forward privileged ports.

       By default, the local port is bound in accordance with the
       GatewayPorts setting. However, an explicit bind_address may
       be used to bind the connection to a specific address. The
       bind_address of "localhost" indicates that the listening port
       be bound for local use only, while an empty address or '*'
       indicates that the port should be available from all
       interfaces.

       Example:
          LocalForward 20000 192.168.0.66:80 . Optional. Type list
       of node.

   LogLevel
       Gives the verbosity level that is used when logging messages
       from ssh(1).  The possible values are: SILENT, QUIET, FATAL,
       ERROR, INFO, VERBOSE, DEBUG, DEBUG1, DEBUG2, and DEBUG3.  The
       default is INFO.  DEBUG and DEBUG1 are equivalent.  DEBUG2
       and DEBUG3 each specify higher levels of verbose
       output.Optional. Type enum. choice: 'SILENT', 'QUIET',
       'FATAL', 'ERROR', 'INFO', 'VERBOSE', 'DEBUG', 'DEBUG1',
       'DEBUG2', 'DEBUG3'. upstream_default: 'INFO'.

   MACs
       Specifies the MAC (message authentication code) algorithms in
       order of preference. The MAC algorithm is used in protocol
       version 2 for data integrity protection.Optional. Type
       check_list. choice: 'hmac-md5', 'hmac-sha1',
       'umac-64@openssh.com', 'hmac-ripemd160', 'hmac-sha1-96',
       'hmac-md5-96'.

   NoHostAuthenticationForLocalhost
       This option can be used if the home directory is shared
       across machines. In this case localhost will refer to a
       different machine on each of the machines and the user will
       get many warn ings about changed host keys. However, this
       option disables host authentication for localhost. The
       default is to check the host key for localhost.Optional. Type
       boolean. upstream_default: '0'.

   NumberOfPasswordPrompts
       Specifies the number of password prompts before giving
       up.Optional. Type integer. upstream_default: '3'.

   PasswordAuthentication
       Specifies whether to use password authentication.Optional.
       Type boolean. upstream_default: '1'.

   PermitLocalCommand
       Allow local command execution via the LocalCommand option or
       using the !command escape sequence in ssh(1).Optional. Type
       boolean. upstream_default: '0'.

   LocalCommand
       Specifies a command to execute on the local machine after
       successfully connecting to the server. The command string
       extends to the end of the line, and is executed with the
       user's shell. The following escape character substitutions
       will be performed: '%d' (local user's home directory), '%h'
       (remote host name), '%l' (local host name), '%n' (host name
       as provided on the command line), '%p' (remote port), '%r'
       (remote user name) or '%u' (local user name). This directive
       is ignored unless PermitLocalCommand has been
       enabled.Optional. Type uniline.

   Port
       Specifies the port number to connect on the remote
       host.Optional. Type integer. upstream_default: '22'.

   PreferredAuthentications
       Specifies the order in which the client should try protocol 2
       authentication methods.  This allows a client to prefer one
       method (e.g. keyboard-interactive) over another method (e.g.
       password).Optional. Type check_list. choice:
       'gssapi-with-mic', 'hostbased', 'publickey',
       'keyboard-interactive', 'password'.

   Protocol
       Specifies the protocol versions ssh(1) should support in
       order of preference.  The default is "2,1".  This means that
       ssh tries version 2 and falls back to version 1 if version 2
       is not available.Optional. Type check_list. choice: '2', '1'.

   ProxyCommand
       Specifies the command to use to connect to the server. The
       command string extends to the end of the line, and is
       executed with the user's shell. In the command string, '%h'
       will be substi tuted by the host name to connect and '%p' by
       the port.  The com mand can be basically anything, and should
       read from its standard input and write to its standard
       output. It should eventually connect an sshd(8) server
       running on some machine, or execute sshd -i somewhere. Host
       key management will be done using the HostName of the host
       being connected (defaulting to the name typed by the user).
       Setting the command to "none" disables this option entirely.
       Note that CheckHostIP is not available for connects with a
       proxy command.

       This directive is useful in conjunction with nc(1) and its
       proxy support. For example, the following directive would
       connect via an HTTP proxy at 192.0.2.0:

           ProxyCommand /usr/bin/nc -X connect -x 192.0.2.0:8080 %h %p. I<< Optional. Type uniline.  >>

   PubkeyAuthentication
       Specifies whether to try public key authentication. This
       option applies to protocol version 2 only.Optional. Type
       boolean. upstream_default: '1'.

   RekeyLimit
       Specifies the maximum amount of data that may be transmitted
       before the session key is renegotiated.  The argument is the
       number of bytes, with an optional suffix of 'K', 'M', or 'G'
       to indicate Kilobytes, Megabytes, or Gigabytes, respectively.
       The default is between '1G' and '4G', depending on the
       cipher.  This option applies to protocol version 2
       only.Optional. Type uniline.

   RemoteForward - remote port forward to local
       Specifies that a TCP port on the remote machine be forwarded
       over the secure channel to the specified host and port from
       the local machine. Multiple forwardings may be specified, and
       additional forwardings can be given on the command line. Only
       the superuser can forward privileged ports.

       If the bind_address is not specified, the default is to only
       bind to loopback addresses. If the bind_address is '*' or an
       empty string, then the forwarding is requested to listen on
       all inter faces. Specifying a remote bind_address will only
       succeed if the server's GatewayPorts option is enabled (see
       sshd_config(5)).Optional. Type list of node.

   RhostsRSAAuthentication
       Specifies whether to try rhosts based authentication with RSA
       host authentication. This option applies to protocol version
       1 only and requires ssh(1) to be setuid root.Optional. Type
       boolean. upstream_default: '0'.

   RSAAuthentication
       Specifies whether to try RSA authentication. RSA
       authentication will only be attempted if the identity file
       exists, or an authentication agent is running. Note that this
       option applies to protocol version 1 only.Optional. Type
       boolean. upstream_default: '1'.

   SendEnv
       Specifies what variables from the local environ(7) should be
       sent to the server. Note that environment passing is only
       supported for protocol 2. The server must also support it,
       and the server must be configured to accept these environment
       variables. Refer to AcceptEnv in sshd_config(5) for how to
       configure the server. Variables are specified by name, which
       may contain wildcard char acters. Multiple environment
       variables may be separated by whitespace or spread across
       multiple SendEnv directives. The default is not to send any
       environment variables.

       See PATTERNS in ssh_config(5) for more information on
       patterns.Optional. Type list of uniline.

   ServerAliveCountMax
       Sets the number of server alive messages (see below) which
       may be sent without ssh(1) receiving any messages back from
       the server. If this threshold is reached while server alive
       messages are being sent, ssh will disconnect from the server,
       terminating the session.  It is important to note that the
       use of server alive messages is very different from
       TCPKeepAlive.  The server alive messages are sent through the
       encrypted channel and there fore will not be spoofable. The
       TCP keepalive option enabled by TCPKeepAlive is spoofable.
       The server alive mechanism is valuable when the client or
       server depend on knowing when a connec tion has become
       inactive.

       The default value is 3. If, for example, ServerAliveInterval
       is set to 15 and ServerAliveCountMax is left at the default,
       if the server becomes unresponsive, ssh will disconnect after
       approximately 45 seconds.  This option applies to protocol
       version 2 only; in protocol version 1 there is no mechanism
       to request a response from the server to the server alive
       messages, so disconnection is the responsibility of the TCP
       stack.Optional. Type integer. upstream_default: '3'.

   ServerAliveInterval
       Sets a timeout interval in seconds after which if no data has
       been received from the server, ssh(1) will send a message
       through the encrypted channel to request a response from the
       server.  The default is 0, indicating that these messages
       will not be sent to the server, or 300 if the BatchMode
       option is set.  This option applies to protocol version 2
       only.  ProtocolKeepAlives and SetupTimeOut are Debian-
       specific compatibility aliases for this option.Optional. Type
       integer. upstream_default: '0'.

   SmartcardDevice
       Specifies which smartcard device to use.  The argument to
       this keyword is the device ssh(1) should use to communicate
       with a smartcard used for storing the user's private RSA key.
       By default, no device is specified and smartcard support is
       not activated.Optional. Type uniline.

   StrictHostKeyChecking
       If this flag is set to "yes", ssh(1) will never automatically
       add host keys to the ~/.ssh/known_hosts file, and refuses to
       connect to hosts whose host key has changed.  This provides
       maximum protection against trojan horse attacks, though it
       can be annoying when the /etc/ssh/ssh_known_hosts file is
       poorly maintained or when connections to new hosts are
       frequently made.  This option forces the user to manually add
       all new hosts.  If this flag is set to "no", ssh will
       automatically add new host keys to the user known hosts
       files.  If this flag is set to "ask", new host keys will be
       added to the user known host files only after the user has
       confirmed that is what they really want to do, and ssh will
       refuse to connect to hosts whose host key has changed.  The
       host keys of known hosts will be verified automatically in
       all cases. The argument must be "yes", "no", or "ask".  The
       default is "ask".Optional. Type enum. choice: 'yes', 'no',
       'ask'. upstream_default: 'ask'.

   TCPKeepAlive
       Specifies whether the system should send TCP keepalive
       messages to the other side.  If they are sent, death of the
       connection or crash of one of the machines will be properly
       noticed.  This option only uses TCP keepalives (as opposed to
       using ssh level keepalives), so takes a long time to notice
       when the connection dies.  As such, you probably want the
       ServerAliveInterval option as well.  However, this means that
       connections will die if the route is down temporarily, and
       some people find it annoying. The default is "yes" (to send
       TCP keepalive messages), and the client will notice if the
       network goes down or the remote host dies.  This is important
       in scripts, and many users want it too.

       To disable TCP keepalive messages, the value should be set to
       "no".Optional. Type boolean. upstream_default: '1'.

   Tunnel
       Request tun(4) device forwarding between the client and the
       server.  The argument must be "yes", "point-to-point" (layer
       3), "ethernet" (layer 2), or "no".  Specifying "yes" requests
       the default tunnel mode, which is "point-to-point".  The
       default is "no".Optional. Type enum. choice: 'yes',
       'point-to-point', 'ethernet', 'no'. upstream_default: 'no'.

   TunnelDevice
       Specifies the tun(4) devices to open on the client
       (local_tun) and the server (remote_tun).

                    The argument must be local_tun[:remote_tun].  The devices may be specified by numerical ID or the keyword "any", which uses the next available tunnel device.  If remote_tun is not specified, it defaults to "any".  The default is "any:any".I<< Optional. Type uniline. upstream_default: 'any:any'.  >>

   UseBlacklistedKeys
       Specifies whether ssh(1) should use keys recorded in its
       blacklist of known-compromised keys (see ssh-vulnkey(1)) for
       authentication.  If "yes", then attempts to use compromised
       keys for authentication will be logged but accepted.  It is
       strongly recommended that this be used only to install new
       authorized keys on the remote system, and even then only with
       the utmost care.  If "no", then attempts to use compromised
       keys for authentication will be prevented.  The default is
       "no".Optional. Type boolean. upstream_default: '0'.

   UsePrivilegedPort
       Specifies whether to use a privileged port for outgoing
       connections.  The argument must be "yes" or "no".  The
       default is "no". If set to "yes", ssh(1) must be setuid root.
       Note that this option must be set to "yes" for
       RhostsRSAAuthentication with older servers.Optional. Type
       boolean. upstream_default: '0'.

   User
       Specifies the user to log in as.  This can be useful when a
       dif ferent user name is used on different machines.  This
       saves the trouble of having to remember to give the user name
       on the command line.Optional. Type uniline.

   UserKnownHostsFile
       Specifies a file to use for the user host key database
       instead of ~/.ssh/known_hosts.Optional. Type uniline.

   VerifyHostKeyDNS
       Specifies whether to verify the remote key using DNS and
       SSHFP resource records.  If this option is set to "yes", the
       client will implicitly trust keys that match a secure
       fingerprint from DNS.  Insecure fingerprints will be handled
       as if this option was set to "ask".  If this option is set to
       "ask", information on fingerprint match will be displayed,
       but the user will still need to confirm new host keys
       according to the StrictHostKeyChecking option.  The argument
       must be "yes", "no", or "ask".  The default is "no".  Note
       that this option applies to protocol version 2 only.  See
       also VERIFYING HOST KEYS in ssh(1).Optional. Type enum.
       choice: 'yes', 'no', 'ask'. upstream_default: 'no'.

   VisualHostKey
       If this flag is set to "yes", an ASCII art representation of
       the remote host key fingerprint is printed additionally to
       the hex fingerprint string.  If this flag is set to "no",
       only the hex fingerprint string will be printed.  The default
       is "no".Optional. Type boolean. upstream_default: '0'.

   XAuthLocation
       Specifies the full pathname of the xauth(1) program.  The
       default is /usr/bin/X11/xauth.Optional. Type uniline.
       upstream_default: '/usr/X11R6/bin/xauth'.

SEE ALSO
       ·   cme

       ·   Config::Model::models::Ssh::HostElement

       ·   Config::Model::models::Ssh::PortForward

AUTHOR
       Dominique Dumont

COPYRIGHT
       2009-2011 Dominique Dumont

LICENSE
       LGPL2



perl v5.14.2                 2012-10-Config::Model::models::Ssh(3pm)
Results 1 - 1 of 1
Help - FTP Sites List - Software Dir.
Search over 15 billion files
© 1997-2017 FileWatcher.com