Filewatcher File Search File Search
Content Search
» » » » » plptools_1.0.9-2.4_amd64.deb » Content »
pkg://plptools_1.0.9-2.4_amd64.deb:217182/usr/share/man/man8/  info  control  downloads

plptools - Access EPOC device (Psion PDA) over a serial link…  more info»


plpprintd(8)       System administration commands       plpprintd(8)

       plpprintd - Daemon for printing via PC from a Psion.

       plpprintd  [-d]  [-h]  [-v] [-V] [-s spooldir] [-c print-cmd]
       [-p [host:]port] [long-options]

       plpprintd provides a print server for a Psion,  connected  to
       the  PC.  Using plpprintd, you can use the Psion's "Print via
       PC" feature to access any printer, available on your PC. When
       receiving  a  print job, the data is converted to Postscript®
       and then send to a printer.

       -d, --debug
              Enable additional debug messages  and  stay  in  fore‐
              ground (do not fork).

       -h, --help
              Display a short help text and exit.

       -v, --verbose
              Increase verbosity

       -V, --version
              Display the version and exit

       -s, --spooldir=dir
              Specify  a directory to use for temporary spool files.
              If  this  option  is  missing,   a   builtin   default
              /var/spool/plpprint is used.

       -c, --printcmd=cmd
              Specify  a command for actually sending a print job to
              the printer. The specified command  must  receive  the
              data  from its standard input. If this option is miss‐
              ing, a builtin default lpr -Ppsion is used.

       -p, --port=[host:]port
              Specify the host and port to connect to (e.g. The port
              where  ncpd  is listening on) - by default the host is
     and the port is looked up in  /etc/services.
              If  it  is not found there, a builtin value of 7501 is


              contains  the  Postscript(®)  dictionary,  needed  for
              printing the jobs.

              specifies  the  font  mapping to be used. This file is
              used to convert the  Psion's  font  names  into  valid
              Postscript(®)  font  names. Its format is described at
              the beginning of it. If a Psion font name is  received
              which can not be found in this file, a builtin default
              Courier is used.

       Using patterns in diagrams gives ugly results.

       ncpd(8), plpfuse(8), plpftp(1), sisinstall(1)

       Fritz Elfert

plptools 1.0.9               2007/12/26                 plpprintd(8)
Results 1 - 1 of 1
Help - FTP Sites List - Software Dir.
Search over 15 billion files
© 1997-2017