» Content »pkg://x-loader_1.5.0+git20110325+b6bbfe7.orig.tar.gz:231880
/ info downloads
# (C) Copyright 2004-2006 Texas Instruments
# Some cut/paste from U-Boot README
# (C) Copyright 2000 - 2004
# Wolfgang Denk, DENX Software Engineering, firstname.lastname@example.org.
# See file CREDITS for list of people who contributed to this
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
This directory contains the source code for X-Loader, an initial program
loader for Embedded boards based on OMAP processors. X-Loader can be
signed by Texas Instruments IFT and installed to Nand flash to achieve
The support for Texas Instruments H4 board (OMAP2420) has been implemented
and tested. (Nov 2004)
The support for Texas Instruments 2430SDP board (OMAP2430) has been implemented
and tested. (Jul 2006)
The support for Texas Instruments 3430SDP board (OMAP3430) has been implemented
and tested. (Dec 2006)
Support for other OMAP boards can be added.
- board Board dependent files
- cpu CPU specific files
- drivers Commonly used device drivers
- lib Libraries
- cpu/arm926ejs Files specific to ARM 926 CPUs
- cpu/arm1136 Files specific to ARM 1136 CPUs
- cpu/omap3 Files specific to ARM CortexA8 CPU
Files specific to OMAP 2420 H4 boards
Files specific to OMAP 2430 2430sdp boards
Files specific to OMAP 3420sdp boards
Configuration is usually done using C preprocessor defines. Configuration
depends on the combination of board and CPU type; all such information is
kept in a configuration file "include/configs/<board_name>.h".
Example: For a OMAP4 PandaBoard, all configuration settings are in
For all supported boards there are ready-to-use default
configurations available; just type "make <board_name>_config".
Example: For a OMAP4 PandaBoard, type:
After a board has been configured, type "make" to build it supposing the
needed cross tools are in your path.
X-Loader expects OS boot loader (e.g. U-Boot) in Nand flash using
JFFS2 style ECC.
Prepare Booting Nand Flash:
After you have built x-load.bin for your board, you need to do the
followings to get it into Nand flash:
1. Use Texas Instruments IFT to sign x-load.bin. This results in a
signed image called x-load.bin.ift.
2. Use Texas Instruments FlashPrep to generate a .out file using
FlashWriterNand and specifying 0 as nand target address.
3. Use Texas instrumnets Code Composer Studio to run the .out file
which flashes x-load.bin.ift to Nand flash.
Next you need to get your OS boot loader to Nand at the address your
X-Loader expects. For the H3 example, you can use U-Boot to flash U-Boot.
You can't use FlashWriterNand because it uses ROM code ECC style.
H4 support NAND flash booting
2430sdp & 3430sdp support OneNAND booting
Results 1 - 1 of 1Search over 15 billion files
© 1997-2017 FileWatcher.com